Thank you very much for taking inspiration from our robot!! We actually did make into worlds, but we decided that we are not gonna go due to some plans. Thank you for watching this video :)
You were one of the biggest inspirations for us! You probably don’t remember us but we were once alliances in Pitching In. I’m so sorry you have a test on that day..
This is my first year and my first teams year going to worlds! We wanted to see you guys (we means me bc I watch vex yters lol) Good luck next year guys!
No so sad you arn't coming tpo worlds. You have a very very good Robot and me and my team got inspired by your first robot. We were hoping we would see you in worlds but stuff hapens. Nice Season GOOD LUCK NEXT YEAR! You are AMAZING!!!!!
Thank you very much! I would love to see your robot at Worlds but it is quite unfortunate that we can't go. May I know your team's number? This way I can watch the live stream :)
sorry that I made you guys lose pitching in, I was looking forward to making it up to you at worlds this year. sorry that you can't go! awesome robot 👍
It was an awesome match at the dome pairing up with you guys. It's quite unfortunate that we can't go, It would be nice if we got paired up again this year. I will be watching the Livestream haha. See you guys in the dome on live :) Good Luck, and thanks for watching my video :D
Idk HOW y'all are so freaking good, but keep up the good work. And I was wondering if you have any tips because my team just came back from states and we don't know if we're going to worlds yet.
We use slow motion to see and record the shooting process, and see if there are some points the discs might get stuck while shooting. This helps us better get hold of the problem.
The blue round pulley wheels are used for guiding the structure inside the dispenser. Without it, the tolerance would be much lower on both driver and auto skills. Thank you for watching this video :)
How do you have enough torque to do the blue dispenser? I made a prototype, but when I put it on my robot, the drivetrain seems to have not enough torque. (I have a 2:1 drive base)
@@hongni7135 There will certainly be some difference based on the robot, but I do think the blue structure should work on 2:1 speed gear ratio chassis.
Hey! I’m sorry you couldn’t make it to worlds this year. I was hoping to see you at the dome again but, I’d like to understand more on the blue dispenser. I’ve seen many teams do it and even though we won alliance at states in SOCAL me and my team still have a lot to improve. I’ve kinda been scratching my head on why they use the pulleys on the side of the blue dispenser. I’ve read your replies about less tolerance and i don’t understand your term tolerance that well. Can you clarify how it works and what tolerance is?
The tolerance here means fault tolerance. Which means the ability to endure an allowable amount of variation to the original perfect plan. High tolerance means the robot can still finish the run even if some degree is of. The pulley beside basically guides the robot into the blue dispenser. When the robot is not going perfectly straight into the blue dispenser without the pulley, there is a big chance it is not going in. However, if we have the pulley wheels by the side, it can guide the robot into the dispenser even when the robot is not going in straight. This increases the tolerance of the blue dispenser mechanism.
woahh our team stand no chance at worlds lol. sorry your team can't make it :( also, has your robot ever had a problem with it drifting, as it's a huge problem for us. if you did, i would appreciate if you could let me know. thanks!
Make a stable drivetrain so it doesn’t drift as much and maybe add some traction wheels. Also they made it to worlds they just had something they couldn’t miss for school so they couldn’t attend
The main point to avoid jamming is how the discs fall into the tubes. For example, we are currently using a conveyor belt, and we tried not to make the discs fall straight. If the discs fall straight into the tube, the chance of it getting back is impossible, but if you minimize the chance or make the discs fall only a little tilted, it might solve the problem. Btw, we still have the problem of discs jamming but seldomly.
Another thing is, the discs often get jammed when more than one discs fall down at the same time. That is why we added a standoff at the end of the tread, this can only let one disc pass at one time. There is a close-up view in this video: ua-cam.com/video/Qob8Vh9coAI/v-deo.html
@@flyingcheese22608a I personally think the difficulty for the code are the same. However, the main difference will be the tolerance of the robot. If the robot fails a mission by being off by a few degrees, that means the robot still needs improvement. Improvements can include guider for the blue dispenser, or anything that can guide the robot into the correct position. If it is to compare the whole autonomous development progress, I would say pitching in was harder, because there were so many possible strategies that needed to be tried out. For example, which route, where to shoot, how many balls to hold, etc.
We use a gyro sensor for autonomous and took a lot of time to improve our robot's tolerance of different situations. For example, we added the pulley wheels at the front of the blue dispenser mechanism. We are not going to Worlds because I have a test coming up during that time.
This is to calibrate our gyro for the robot. If we constantly use gyro without re-calibrating it, the degrees are often off by a lot, and it becomes unstable. The borders(walls) are straight so it is an awesome tool for calibrating. Another reason is to make sure the robot always starts in the same position before doing purple and blue.
![Дон ДОН, Алаудинов и СБЕЖАВШИЕ из под Курска ахматовцы 😁 [Пародия]](http://i.ytimg.com/vi/dEfCf5IK26Q/mqdefault.jpg)
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
Just us being super nervous, four discs went on the floor cuz we drive too fast while getting the blue dispensers😂 Auto even had a higher score...lol
You guys were an inspiration for my team, it’s so sad that you guys didn’t make it. We may not make it to worlds this year either. 😢
Thank you very much for taking inspiration from our robot!! We actually did make into worlds, but we decided that we are not gonna go due to some plans. Thank you for watching this video :)
How did you do the extending? Is it more than one motors to start the reaching?
Ps: I got into worlds!
You were one of the biggest inspirations for us! You probably don’t remember us but we were once alliances in Pitching In. I’m so sorry you have a test on that day..
Thank you so much! May I ask in which competition were we alliances, I couldn’t seem to find a previous match alliances with 1876Z.
@@PurinChan It was in Pitching In!
at worlds
@@azda_ We are both in the Spirit Division :) However I supposed we didn't got paired up for a teamwork match?
@@PurinChan you guys should just miss the test it would be awesome to see you at worlds
This is my first year and my first teams year going to worlds! We wanted to see you guys (we means me bc I watch vex yters lol) Good luck next year guys!
3:28 hitting the wall to line up the robot is so smart :O
Thanks :))
No so sad you arn't coming tpo worlds. You have a very very good Robot and me and my team got inspired by your first robot. We were hoping we would see you in worlds but stuff hapens. Nice Season
GOOD LUCK NEXT YEAR! You are AMAZING!!!!!
Thank you very much! I would love to see your robot at Worlds but it is quite unfortunate that we can't go. May I know your team's number? This way I can watch the live stream :)
That Auto is amazing! you guys must have some great programmer's on that team :)
Haha thank you :)
sorry that I made you guys lose pitching in, I was looking forward to making it up to you at worlds this year. sorry that you can't go! awesome robot 👍
It was an awesome match at the dome pairing up with you guys. It's quite unfortunate that we can't go, It would be nice if we got paired up again this year.
I will be watching the Livestream haha. See you guys in the dome on live :) Good Luck, and thanks for watching my video :D
You posted this literally a couple minutes after I commented on your last vid, should have just waited for this video
It is fine lol, the video is always here :)
how
DANG! Ur so good! Our team just wants to do well in state lol.
Idk HOW y'all are so freaking good, but keep up the good work. And I was wondering if you have any tips because my team just came back from states and we don't know if we're going to worlds yet.
Thank you very much!! What type of tips do you want to hear in specific?
Do you have any tips to fine-tune the shooter? Ours is different, but i feel some general ideas should carry over.
We use slow motion to see and record the shooting process, and see if there are some points the discs might get stuck while shooting. This helps us better get hold of the problem.
@Purin Chan Okay that's smart thanks!
Great work!
Thank you very much for supporting :DD
Very good job!! Big inspiration. One question though, what do the gears on top of the blue dispenser used for?
The blue round pulley wheels are used for guiding the structure inside the dispenser. Without it, the tolerance would be much lower on both driver and auto skills.
Thank you for watching this video :)
@@PurinChan Loved it
How do you have enough torque to do the blue dispenser? I made a prototype, but when I put it on my robot, the drivetrain seems to have not enough torque. (I have a 2:1 drive base)
We use a 1.5:1 gear ratio for the chassis. However, I am not sure if this affects the blue dispenser retriever.
@@PurinChan Thanks for your prompt reply, do you think the torque is very different between 2:1 and 1.5:1
@@hongni7135 There will certainly be some difference based on the robot, but I do think the blue structure should work on 2:1 speed gear ratio chassis.
Hey! I’m sorry you couldn’t make it to worlds this year. I was hoping to see you at the dome again but, I’d like to understand more on the blue dispenser. I’ve seen many teams do it and even though we won alliance at states in SOCAL me and my team still have a lot to improve. I’ve kinda been scratching my head on why they use the pulleys on the side of the blue dispenser. I’ve read your replies about less tolerance and i don’t understand your term tolerance that well. Can you clarify how it works and what tolerance is?
The tolerance here means fault tolerance. Which means the ability to endure an allowable amount of variation to the original perfect plan.
High tolerance means the robot can still finish the run even if some degree is of.
The pulley beside basically guides the robot into the blue dispenser. When the robot is not going perfectly straight into the blue dispenser without the pulley, there is a big chance it is not going in. However, if we have the pulley wheels by the side, it can guide the robot into the dispenser even when the robot is not going in straight. This increases the tolerance of the blue dispenser mechanism.
@@PurinChan That makes so much sense! Thank you so much 😊
@@noodles9304 You're welcome :) Thank you for asking :D
the auton is so good
How many Sensors and Motors are you guys using?
6 motors, 1 gyro, and 1 touchLED
woahh our team stand no chance at worlds lol. sorry your team can't make it :( also, has your robot ever had a problem with it drifting, as it's a huge problem for us. if you did, i would appreciate if you could let me know. thanks!
Make a stable drivetrain so it doesn’t drift as much and maybe add some traction wheels. Also they made it to worlds they just had something they couldn’t miss for school so they couldn’t attend
Question, my team constantly gets discs jammed in the shooter. We have the same plastic tubes you are using, how do you prevent them from jamming?
The main point to avoid jamming is how the discs fall into the tubes. For example, we are currently using a conveyor belt, and we tried not to make the discs fall straight. If the discs fall straight into the tube, the chance of it getting back is impossible, but if you minimize the chance or make the discs fall only a little tilted, it might solve the problem.
Btw, we still have the problem of discs jamming but seldomly.
Another thing is, the discs often get jammed when more than one discs fall down at the same time. That is why we added a standoff at the end of the tread, this can only let one disc pass at one time.
There is a close-up view in this video: ua-cam.com/video/Qob8Vh9coAI/v-deo.html
Programming skills are amazing. What sensors did you use to make the robot walk so accurately?
We used only the gyro senser for calibrating the robot movements. Also used a TouchLED senser for starting the program.
@@PurinChan Did you use Pstraight code?
@@landonvo3098 I use robotc to code
@@PurinChan oh okay I just use the VexCode blocks lol
Great video and great robot! Why not the Worlds?
I have a test crashing with the Worlds. However, we don’t regret making this decision :)
@@PurinChan You have done great enough this season! Good luck on the test!
@@flyingcheese22608a Thank you! You guys are also super good at your flywheel, good luck in worlds!!
@@PurinChan How do you compare the Slapshot anton difficulty to Pitching In？We Keeps failing this season.
@@flyingcheese22608a I personally think the difficulty for the code are the same. However, the main difference will be the tolerance of the robot. If the robot fails a mission by being off by a few degrees, that means the robot still needs improvement.
Improvements can include guider for the blue dispenser, or anything that can guide the robot into the correct position.
If it is to compare the whole autonomous development progress, I would say pitching in was harder, because there were so many possible strategies that needed to be tried out. For example, which route, where to shoot, how many balls to hold, etc.
We use the same yellow mech and how is ur automatic consistent and y no worlds
We use a gyro sensor for autonomous and took a lot of time to improve our robot's tolerance of different situations. For example, we added the pulley wheels at the front of the blue dispenser mechanism.
We are not going to Worlds because I have a test coming up during that time.
Omg!!
What type of puncher do you use
Is it like a 2by beam that is pulled back or the type you used on your 2rd generation robot
What kind of magic happened on Yellow pickup?!?
The mechanism is shown in this video :)
→ua-cam.com/video/Qob8Vh9coAI/v-deo.html
why does the robot go into the border at 2:16
line up for blue and purple its easier to do this than set the exact amount you need to go to line up
This is to calibrate our gyro for the robot. If we constantly use gyro without re-calibrating it, the degrees are often off by a lot, and it becomes unstable. The borders(walls) are straight so it is an awesome tool for calibrating.
Another reason is to make sure the robot always starts in the same position before doing purple and blue.
@@PurinChan oh thank you