It also means the pilot is aware of the wing loading and didn't try a slow scale-like fly by. I have seen many fine looking scale planes stalled and destroyed that way.
Wow wow wow , i knew someone would do it eventually , I've dreamed of seeing this since a little boy , This is ground breaking in the scale warbird arena . Absolutely buzzing thanks for sharing this .
When it first started up I was thinking that sounds worse than my 3 cylinder Daihatsu van. But when it's going.... Holy guacamole, sounds great 👍👍 Well done, thanks for sharing.
Beautiful engine...no doubt! Just a friendly criticism: that landing approach was way, way, too steep! Your beautiful plane was building E on it's descent; not shedding it, hence the wild porpoising as you tried to flair. I'm a old timer RC flyer and real general aviation (single engine) pilot; your landing approach should really be at a much shallower angle to the threshold/runway and by all means, take your time to get out your flaps and gear and bleed off that speed!! I suggest you get gear out and flaps down as you turn down-wind from up-wind of the runway, pulling your power back to about 25% and maintaining a shallow descent on the down-wind approach. When you turn-to-base (L-turn to runway), make sure your throttle is only slightly open (~ 20%), coordinate rudder/aileron turn to final, and maintain a long, shallow approach to the field with power on. I see so many beautiful models pushing their gear through the wings, or worse, due to poor landing approach technique which manifests itself in porpoising, crashing through ground effect, etc. Let's keep you and that lovely plane flying for many day's to come!! Love to have one of those engines in my old 1/5th scale Pony as well..! Happy skies :)
My all time favorite. Such a beautiful job. And a nice flight. So now before its.too late hang that beauty up. You and others will then enjoy it for many years to come.
Wow! That really is something. Even the sound is scale. And it (the V 12) could power a multitude of types. Imagine a 1/4 scale Lancaster with 4 of those amazing V 12's overhead?
@@flightforensics4523 this aircraft is not a "toy" - it is the result of hundreds of hours of engineering and construction, and one of the first examples of an actual flying miniature V-12 that I'm aware of. The thought of a full scale, historic, multi-million dollar P-51 in the hands of someone with your childish attitude and arrogance is frightening, if true.
Finally someone has done it what I have dreamed of doing, have partially machined crankcase and crank with rods on my shelf just to make a V12 on a rc mustang. Is there a build blog or something to get more details of this amazing build?
One of the most interesting set-up in Aeromodel I've seen in the past 10 years ! You could be very proud ! Definitely need a microphone to improve our pleasure in your video Cheers from France 🇨🇵
The small model V12s don't sound particularly good the cylinders are tiny , It doesn't sound like a weed eater though ? and it's really under proped so it's much faster than when it's properly loaded with a decent propeller .
If you download the video and drop it into your favorite video player and drop the playback speed by 3X, that little Leslie V12 sounds identical to the RR Merlin at speed!😉 (The speed control in YT won't do it, because it tries to maintain the original pitch)🙄
I have the plans for an air-cooled V12 about that size in my files from a company out of Germany. After they completed that, they went on to do a liquid-cooled version.
How freakin' cool is that?!! A real scale model Merlin V-12 right where it should be in the P-51 warbird!! ..and it actually runs and flies! Can't wait to see it swinging a little bigger prop, better suited for the power curve of the engine.😄👍👍 *EDIT:* If you download the video and drop it into your favorite video player and drop the playback speed by 3X, that little Leslie V12 sounds identical to the RR Merlin at speed!🛩
That's a slick unit. Doubt I'd have the nerve to actually fly it considering the hours and money it represents. I think the most amazing feat of precision measuring and machining I have ever laid eyes on was at an RC and ultralight fly in I attended about 10 years ago with my Rotorway Scorpion 133 project (a sadly incomplete project). Anyway, I happened upon an old timer that always had something cool to show off every year. This year he had a huge BV 138 flying boat in gorgeous luftwaffe maritime patrol livery that be designed and built in his shop over a few years. looked to be about 1:10 scale and everything was accurate right down to the hand made rivets in the hull. It had a functional searchlight, turrets and retractable gear but that's not even the coolest part... This guy hand designed (no computer because he didn't know how to use one..) and built not 1, not 2 but 3 scale Junkers Jumo diesel aero engines! complete with hand built turbo's, gearboxes and props. And he did it the old fashioned way with lathe's, saws, drills, files, lost wax casting etc. Apparently he even built a mini drop hammer forge to make the rods, crank and studs. I was so amazed I forgot to ask the obvious.. What the hell does it run on?? At that scale I'd expect diesel to have a viscosity like motor oil, so I doubt it can be atomized through a teeny little injector.. They all ran great though, and it sounded amazing!
If you download the video and drop it into your favorite video player and drop the playback speed by 3X, that little Leslie V12 sounds identical to the RR Merlin at speed!😉 (The speed control in YT won't do it, because it tries to maintain the original pitch)🙄
@@RCScaleAirplanes it's cylinders are 9 cc , to get a better sound I'd say you would need 25 to 100cc cylinders . I'm just buzzing a water cooled V12 has flown in war bird it's incredible and very exciting .
Sounds like it’s turning too many R’s. Definitely needs a hotter pitch prop as mentioned and possibly more gearing? Not sure what the optimum torque/hp spec is. Just the sound of it being v12 seems like it’s stretched waaaay out
At that size and performance, a TBS long range FPV system might be a wise choice, that model could get too small to orient by visual aquity alone very very quickly.
@@ralphjohnson4041 If you can see the plane and tell which way it is up, a 1 & 1/4 mile, sure. For every other person, there's Long Range FPV cameras and transmitters.
BRAVO- wonderful model ! Sadly, here in Canada, I would not be able to fly such an aircraft - reason being, the Canadian Government has decided that ALL RC Aircraft models over 200g are potential, weaponized drones! All such RC models, need to get an aircraft REGISTRATION, have a TRANSPONDER, have the SAME log books as a real aircraft (engine log, airframe log etc), and the operator have a 'Drone Operator License'! It is now illegal for me to fly my B25 Mitchell Bomber (Royal Kit). That effectively has killed this hobby.
Canada is basically a dictatorship now. No guns and now no models? Glad I dont live there. I live in shithole CA and it is bad enough here with all these democrats.
In France, if you don't fly in a model club, you have to take an exam and register your plane, then add a 2.4GHz beacon. There are also areas where flying is prohibited, but there are still plenty of places where you can fly.
V12 Or Not These Engines Are Not Strong Enough! Check The German Record "The Galloping Ghost P-51" They Used A Self Made Inline 4 With Breathtaking Power Speed And Sound....
Bravo! A V12 model aero engine is finally with us. Don't let the nitpicking gigadorks bother you. You've achieved something amazing.
When a maiden flight comes back in one piece, that is a Big success ! great job.
It also means the pilot is aware of the wing loading and didn't try a slow scale-like fly by. I have seen many fine looking scale planes stalled and destroyed that way.
Wow wow wow , i knew someone would do it eventually , I've dreamed of seeing this since a little boy , This is ground breaking in the scale warbird arena . Absolutely buzzing thanks for sharing this .
Me too! And its every bit as good as I always thought it would be.
Now we need to genetically engineer a 1/4 scale pilot to fly it!
Some people are really hard-working men. Such a super cool engine and such a lot of work! Respect!
that V12 sounds so good. sweet test flight.
When it first started up I was thinking that sounds worse than my 3 cylinder Daihatsu van. But when it's going.... Holy guacamole, sounds great 👍👍 Well done, thanks for sharing.
Unbelievable! What a fine art of craftsmanship! That is so cool.
That engine would be cool in a R/C boat or car too!
Beautiful engine...no doubt! Just a friendly criticism: that landing approach was way, way, too steep! Your beautiful plane was building E on it's descent; not shedding it, hence the wild porpoising as you tried to flair. I'm a old timer RC flyer and real general aviation (single engine) pilot; your landing approach should really be at a much shallower angle to the threshold/runway and by all means, take your time to get out your flaps and gear and bleed off that speed!! I suggest you get gear out and flaps down as you turn down-wind from up-wind of the runway, pulling your power back to about 25% and maintaining a shallow descent on the down-wind approach. When you turn-to-base (L-turn to runway), make sure your throttle is only slightly open (~ 20%), coordinate rudder/aileron turn to final, and maintain a long, shallow approach to the field with power on. I see so many beautiful models pushing their gear through the wings, or worse, due to poor landing approach technique which manifests itself in porpoising, crashing through ground effect, etc. Let's keep you and that lovely plane flying for many day's to come!! Love to have one of those engines in my old 1/5th scale Pony as well..! Happy skies :)
Bruce from down under, demonstrating to, Bruce and Bruce the lovely v12 powered rc mustang. Gday.🤠👍
It saves confusion
Wonderful! I wish you'd do another video on just that amazing engine.
My all time favorite. Such a beautiful job. And a nice flight. So now before its.too late hang that beauty up. You and others will then enjoy it for many years to come.
Wow! That really is something. Even the sound is scale. And it (the V 12) could power a multitude of types.
Imagine a 1/4 scale Lancaster with 4 of those amazing V 12's overhead?
Too cool! I will be waiting to see it with the prop grabbing more air! It sounds so cool!
What a beautiful model
God,...some people have tooooo much time on their hands. Wow! I choose to live vicariously through you :)
Beautiful plane and a successful flight well done 👏
Wonderful! Well done 👍🏻
Amazing. The miniature V-12 and the effort.
Awesome! This scale model is even better than the real plane. The engine is gorgeous.
This toy if not respected will rip your hand off.
@@flightforensics4523 this aircraft is not a "toy" - it is the result of hundreds of hours of engineering and construction, and one of the first examples of an actual flying miniature V-12 that I'm aware of. The thought of a full scale, historic, multi-million dollar P-51 in the hands of someone with your childish attitude and arrogance is frightening, if true.
What a plane! P51s are a favourite. Can you do an episode just on the motor?
ENGINE !!!
Finally someone has done it what I have dreamed of doing, have partially machined crankcase and crank with rods on my shelf just to make a V12 on a rc mustang. Is there a build blog or something to get more details of this amazing build?
www.youtube.com/@PhiltechEnterprises has videos
Purchase an engine simulation software and start modeling, or just copy another basic cylinder and valves from a properly sized engine.
@@TheJustinJMustang V12 is water cooled OHC . So copy from a boat engine?
One of the most interesting set-up in Aeromodel I've seen in the past 10 years ! You could be very proud !
Definitely need a microphone to improve our pleasure in your video
Cheers from France 🇨🇵
Not the sound i was expecting. Sounds like a regular weed eater engine. Extremely cool none the less.
Definitely didn’t have that beautiful Merlin sound.
The small model V12s don't sound particularly good the cylinders are tiny , It doesn't sound like a weed eater though ? and it's really under proped so it's much faster than when it's properly loaded with a decent propeller .
If you download the video and drop it into your favorite video player and drop the playback speed by 3X, that little Leslie V12 sounds identical to the RR Merlin at speed!😉 (The speed control in YT won't do it, because it tries to maintain the original pitch)🙄
How in the world could 4 people dislike this?
It is fantastic!
Probably Americans, disappointed that you haven't fitted live weapons.
@@budgie98 Well, firing rockets from an R/C plane is kinda cool. But that doesn't top this V12 Mustang at all.
Amazing work!
Elegant maiden flight, no doubt
Congratulations for a successful maiden ❤😎🤙🏼
Lovely little engine.Just like a Swiss watch.looks beautiful❤👍!
Wonderful from Northern Utah 🇺🇸!!! Love It can't wait for more and one on the Engine Please!❤😊
Awesome set up and maiden! Congrats!!!
I have the plans for an air-cooled V12 about that size in my files from a company out of Germany. After they completed that, they went on to do a liquid-cooled version.
Great work! Lovely noise too.
Greetz from Holland.
That's far away! I love Krokets !
@@davidcaro8217 Hahaa, you should then also try "Bitterballen", you'll love these too. 😉
@@GTfour01 oooh, bitterballen ?
I must look it up and try them!
@@davidcaro8217 They're like kroketten but then round, bitesized balls. Great accompanied with a nice stout beer.
@@GTfour01 oh nice sounds fantastic! So whats a good beer in Holland?
WOW! Holy bleep! that is spectacular! Subbed here.
incredible!
puuuh...that looked like a tailhavy fight ...
good job
Incredible! Looking forward to more footage!
Wow, I would be way too intimidated to fly that work of art. Beautiful
Congratulations on that maiden flight!!!
Nicely done Sir
You won't run out of power with a low pitch. Looked real scale speed too. Good job mate.
Good on ya ! Thanks for sharing!
Wow, you really BANGED that in didn't you fella???? .....Surprised you had ANY wheels left after that!
Love it, well done.
Well done!
Awesome sound 👍🏻🤗👍🏻🇺🇸🇺🇸
THAT is AMAZING!!! OH WAUW =) Congratz, it's a beatiful bird.
A magnificent achievement. Well done to all.
Well made , well done - well maiden flight! Enjoy your P51 ! The pitch is a good sign then you have made the motor right 😂
How freakin' cool is that?!! A real scale model Merlin V-12 right where it should be in the P-51 warbird!! ..and it actually runs and flies! Can't wait to see it swinging a little bigger prop, better suited for the power curve of the engine.😄👍👍 *EDIT:* If you download the video and drop it into your favorite video player and drop the playback speed by 3X, that little Leslie V12 sounds identical to the RR Merlin at speed!🛩
cool! keep us posted on the next flight with more pitch !
Thats amazing....super cool work gents
That's a slick unit. Doubt I'd have the nerve to actually fly it considering the hours and money it represents.
I think the most amazing feat of precision measuring and machining I have ever laid eyes on was at an RC and ultralight fly in I attended about 10 years ago with my Rotorway Scorpion 133 project (a sadly incomplete project). Anyway, I happened upon an old timer that always had something cool to show off every year. This year he had a huge BV 138 flying boat in gorgeous luftwaffe maritime patrol livery that be designed and built in his shop over a few years. looked to be about 1:10 scale and everything was accurate right down to the hand made rivets in the hull. It had a functional searchlight, turrets and retractable gear but that's not even the coolest part... This guy hand designed (no computer because he didn't know how to use one..) and built not 1, not 2 but 3 scale Junkers Jumo diesel aero engines! complete with hand built turbo's, gearboxes and props. And he did it the old fashioned way with lathe's, saws, drills, files, lost wax casting etc. Apparently he even built a mini drop hammer forge to make the rods, crank and studs. I was so amazed I forgot to ask the obvious.. What the hell does it run on?? At that scale I'd expect diesel to have a viscosity like motor oil, so I doubt it can be atomized through a teeny little injector.. They all ran great though, and it sounded amazing!
You had me at "liquid cooled"
A fat chunk of awesome.
That was awesome. The plane is beautiful. I love the sound of the engine. Do you have plans of adding more stickers to the plane body?
Did not see whole video but thumbs up! Would be cool to see how they are cooling it. Total loss system?
Cool.. gotta keep throttle a bit when landing.. never shut all the way down
That's so awesome
That is just straight up bad ass.
sounds pretty dam real
Thank you that was really nice 👍
I was expecting a more exotic sound from the engine
Impressive.
😮 awesome!
WOW AWESOME !!!!
Nice. Tell us more about the engine
Beautiful plane in building a P51B
Sounds awesome
Wow, even Rolls-Royce would be impressed!
Fantastic 💪🏼💪🏼💪🏼💪🏼😎😎
very cool, is that a real v12 engine?
MINI MOTOR V12 👍👍 🇧🇷
Is that a 2 stroke or 4 stroke engine?
Incredibly small components, if it's 4 stroke!
Doesn’t quite have that Merlin sound but still sounds pretty awesome. Nice work!
If you download the video and drop it into your favorite video player and drop the playback speed by 3X, that little Leslie V12 sounds identical to the RR Merlin at speed!😉 (The speed control in YT won't do it, because it tries to maintain the original pitch)🙄
Will you ever fly it at warrnambool? Would be awesome to see fly.
right rudder, right rudder :)
Are these beautiful engines reliable? What kind of hours can you get out of one? Or can they self destruct at any time?😁
Nice
Beautiful but sound was disappointing
12 cylinder for 108cc can't make any good sound. 🤷🏻☹️
@@RCScaleAirplanes it's cylinders are 9 cc , to get a better sound I'd say you would need 25 to 100cc cylinders . I'm just buzzing a water cooled V12 has flown in war bird it's incredible and very exciting .
@@ThomasDoubting5 I know. And that's why it sounds like a stitching machine. 🥴
That's why I like Moki, Valach and KOLM Engines.
Plenty of model 12 cylinders sound amazing even with small displacement, but this seems more like the camera's mic didn't like the sound or volume
6000 rpm is too high to sound like the real thing
Next project a Hawker Tempest with a scale Napier Sabre?!
Fantastic.
freaking wicked
Sounds like it’s turning too many R’s. Definitely needs a hotter pitch prop as mentioned and possibly more gearing? Not sure what the optimum torque/hp spec is. Just the sound of it being v12 seems like it’s stretched waaaay out
Wow.
Wonderful ❤
Wow, great achievement. But Sadly, this sounds like my lawnmower .
🤘
That sound bravo
What sound ?
@@tonywright8294 the engine
What else would it be
Where is that amazing engine from???
16kg for a top flite p51 is a lot a lot. Does the engine really need the additional weight of an onboard starter?
are these engines available to purchase? I need one!
Not yet. Manfatcurer is philtech.com.au
At that size and performance, a TBS long range FPV system might be a wise choice, that model could get too small to orient by visual aquity alone very very quickly.
At around 1 1/4 miles range I think the standard gear will be fine.
@@ralphjohnson4041 If you can see the plane and tell which way it is up, a 1 & 1/4 mile, sure. For every other person, there's Long Range FPV cameras and transmitters.
Where can you get that motor
BRAVO- wonderful model ! Sadly, here in Canada, I would not be able to fly such an aircraft - reason being, the Canadian Government has decided that ALL RC Aircraft models over 200g are potential, weaponized drones! All such RC models, need to get an aircraft REGISTRATION, have a TRANSPONDER, have the SAME log books as a real aircraft (engine log, airframe log etc), and the operator have a 'Drone Operator License'! It is now illegal for me to fly my B25 Mitchell Bomber (Royal Kit). That effectively has killed this hobby.
No if you fly in your airfield club and is registered as a flying field for rc models
Can Canada effectively police their entire wilderness area? IIRC Wolverine came from a black project there.
Canada is basically a dictatorship now. No guns and now no models? Glad I dont live there. I live in shithole CA and it is bad enough here with all these democrats.
In France, if you don't fly in a model club, you have to take an exam and register your plane, then add a 2.4GHz beacon. There are also areas where flying is prohibited, but there are still plenty of places where you can fly.
Yeah right a 12 cylinder micro engine.
Sir,
Do you sell these engines? If so, please give me contact info. Thanks
damn...
Gorgeous engine........but put that on gasoline and get away from the glow fuel!!!!!
V12 Or Not These Engines Are Not Strong Enough!
Check The German Record "The Galloping Ghost P-51"
They Used A Self Made Inline 4 With Breathtaking Power Speed And Sound....