Manufacture of special mandrels for SCHAUBLIN milling machine
Вставка
- Опубліковано 10 чер 2023
- The manufacture of special mandrels for disk and modular cutters for the Schaublin milling machine is shown.
I invite you to watch other videos on my channel in playlists
"Schaublin machines (SCHAUBLIN)"
• Станки ШАУБЛИН (SCHAU...
“Lathe MN-80. Modernization":
• Токарный станок МН-80....
"Watch lathe T-65":
• Часовой токарный стано...
"Machines. Repair and improvements. Modernization":
• Станки. Ремонт и дораб...
"Tool. Tool sharpening":
• Самодельный инструмент...
"Products from balls. Working with balls»
• Изделия из шаров. Рабо...
I invite you to my channel:
ua-cam.com/users/my_videos?ar=...
URL of this video:
• ИЗГОТОВЛЕНИЕ специальн...
This milling machine has a spindle made for W20 collets. This means that in order to install cutters, it is necessary to have mandrels for them with a smooth part for collets.
But I decided not to use collets when holding cut-off and modular cutters for the following reasons.
1. Collets cannot deliver high torque.
2. I want to reduce the external runout of the cutter, which consists of the runout of the spindle, collet, mandrel and the cutter itself.
Instead of a collet and a simple mandrel, I decided to make one special mandrel, which is immediately inserted into the spindle and on which the cutter is put on.
Wherein
- the value of the possible transmitted moment from the spindle to the cutter increases;
- the total runout of the cutter is reduced.
It details how I made the custom arbors and then shows in detail the manufacturing process to ensure minimum runout for parting off and modular cutters.
These mandrels can be installed not only in the horizontal spindle of the machine, but also in the vertical one. And also in the dividing head. Now you can try to make gears.
These mandrels can also be put on the Schaublin-90 lathe, because it has exactly the same spindle, if it becomes necessary to mill the part on a lathe. - Наука та технологія
Надеюсь, что видео Вам понравилось и пригодится. А Вы делаете специальные оправки для дисковых и модульных фрез?
Вы большой молодец, всегда приятно смотреть.
Классно, познавательно, интересно!
Лайк тебе, мужик💪
Под Ваши задачи просится что-то большее иногда! Наподобие 1П611. Вы изящно обходите ограничения своих станков. Однако представляю, сколько на все это времени надо.
Я неработающий пенсионер.
Наподобие большого Шаублина.
Анатолий доброе утро! Вы как человек опытный и мудрый , подскажите пожалуйста: возник вопрос, как сделать так , что бы фреза дисковая вращалась не вдоль по длине стола (как у вас на видео) , а поперек стола?
Это мне надо для нарезки зубьев на зубчатых рейках. То есть заготовку рейки установить вдоль стола , а зубья на ней резать поперек , подавая подачей "Х"
У Вас вертикальная голова есть?
Впадины можно фрезеровать не только дисковыми фрезами, но и концевыми с модульным профилем.
@@ANATOLIYSAND вертикальной головки не имеется
@@user-ci1vx2cp8v тогда только концевой фрезой, я полагаю...
+
А сталь какая? Немного похоже на СТ3...
Сталь неизвестная.
13лайк, вдруг есть суеверные :)
Резьбу ведь можно было резать плашкой, удерживая оправку ключём?
М20 плашкой? На МН-80? мудрёно.