How-To Install a New Gas Stove/Range - Gas Line Hook-up
Вставка
- Опубліковано 27 вер 2024
- Here is the kit I used:
BrassCraft Universal Installation Kit for Gas Range- amzn.to/3xZ6mFJ
Jobs like this would be easier if you had wrenches like the one I used here- amzn.to/3NnrafS
![[UA] Eternal Fire проти NAVI | EPL Season 20 Malta](http://i.ytimg.com/vi/chvlsDygrZM/mqdefault.jpg)
Your video saved me $300 from Lowe's insulation thank you
They charge 20 bucks over here in California lol.. you just have to pay 40 for the materials
Just want to give you a shout out on this video and send a HUGE thanks. You just saved me a lot of time and money. Kudos! Much appreciated!
I'm happy I could help, this is exactly why I made the video!
Nice. I would turn the gas off at the meter main with a sticky shut-off valve like that for extra safety.
Thank you for this video and the great information that will be most helpful when my new stove arrives next week!
Definitely replace that gas shut off sooner than later but good job.
I would sprayed the whole line as well even the Yellow!!! Great Video Bro !! I Give it a thumbs up ;👍👍👍
As a plumber/pipefitter. You dope & TAPE everything. I was always taught to use both. For gas, it’s a special Teflon tape. Usually yellow. But regardless, dope/tape every joint
Thanks man, cool stove too, and Happy holidays
That is actually not a compression fitting, it is a flared fitting. A small dab of sealer on the threads is a good idea. You're right, it doesn't seal on the threads, but it lubricates the nut when you tighten it down. Also, you be amazed at how many of those old valves are leaking a little. A gas installer told me about 30 or 40% of them leak a bit. I would change it to a 1/4 turn valve with teflon seals. Well worth the $8.00 or so it'll cost.
Nice job good information
People always act like you need some stupid professional gas tech to hook up a gas range 😂😂😂
4:05 If that's the case what? Can the crush connection be retightened if leaking or do you get one shot at it?
Oh good catch, I skipped my thought process there. Ya if that's the case then you need to see if you can tighten more as it may be loose. Otherwise you would have to look at the connection at the threads. There may be something wrong with them there or something. But almost always if you see a leak you just need to tighten it more. Thanks for the question there, I'm sure anyone it will help anyone else having that question too.
No electric hookup?
Thank you bro for the video 🙌🏽🙏🏽
I recently buyed a Bosch HXR390I50K
and i am confused about the cutout clearance (gap).can you help?
Great video, very helpful. Good luck with Samsung, I had nothing but problems with their appliances.
Thanks I did a lot of research on this model before I bought it and felt pretty comfortable with it. The funny thing with appliances like this is there are always a ton of bad reviews for all of them lol, so far I'm happy with it
@@thecraigofalltrades I had no issues for the first couple of years then the igniter stopped working, ended up replacing that twice, then after about 8 years the oven would drop temperature after heating, maybe 8 years is the average life expectancy for them but I expected better. I could have replaced the control board but figured the igniter was next so just moved on. I saw someone had a class action about them. I like Samsung monitors though, good panels :)
How about LG? I have an LG dishwasher and it is awesome. Thinking about getting an LG range.
I loved my LG gas range. It lasted 13 years, until the touch pad started breaking apart. Then the buttons would not work and I would get an F-3 error message. The top burners were fine, never had trouble with them, but I can no longer use the oven or broiler. We looked into replacing the touchpad, but we could not find the replacement anywhere. :( That's the problem, with electronic parts. I'm looking into an analog gas range.
Thanks Buddy
Do you reply to comments? Lol I’m struggling to put in my new stove… the gas line does not match w the new gas pipe and I can’t get the adaptor off the stove 🥲
Thank you sir 🤜🤛
Thanks 😊
If you loosed the nut on the other side of gas shut off, would have made it easier. Then tighten nut back up.
That was awesome
Soapy water no, windex yes. Easier
ya that's fair, does the same thing. Really any cleaning product that gets bubbly would work but soap produces more bubbles to me so it's more reliable on pin hole type leaks.
Thanks for the vid. This is the second video where the creator mentions to not use tape/compound on the side the hose connects. Great information and know what to do now. Thank you!
How long should you wait for pipe dope to dry before using the stove? Is there a grace period?
There really isn't any kind of cure time, you can use it right away
@@thecraigofalltrades thanks for your response
You can remove the storage drawer to make adjusting the legs to level easier
oh nice tip!
Easy peazy. Thanks for the video. All ready to cook on my new gas stove.
I have a similar Samsung too - wish you had shown the final pic of the yellow flex line - how to place it so it is not kinked in back of stove
Great video, waiting on a new gas range stove delivery today. This video will come in handy
that gas valve should had been replaced , a plumber would have done that first thing , flex gas pipe good for only one use - gas valve good for ever ?
I think that might be a good idea. It was very hard to turn.
Yeah I had the same issue with my gas line for stove. The installation techs didn’t wanna touch it so I had to call a professional to install a new gas valve. Cost me like 350 now I’m here watching videos just in case the stove tech can’t install the new kit…