Thank you for sharing your research, I never worked with Linux... big problem for me but hopefully I'll manage to progress to it in the future if needed.. thank you very much again !!
Thanks! Got access to the chip, took only few minutes. It is 2011 Dell with sanyo fw. I can change cycle count, but not FCC as that value is not plainly visible in the EEPROM.
Hi. It doesn't work for me. The assembly went without errors. The necessary files appeared in the directories. The device is visible using the >lsusb command. But any command in >sudo smbusb_comm --device=i2cdev:///dev/i2c-0< in the terminal error -1 :( . Everything according to the instructions. Maybe you have some advice. Can you share the script files? Maybe this will help me?
I just watched the BQ9000 video and saw the command in the terminal >sudo modprobe i2c-dev< , now everything works. I need a script, please. I don't understand programming. I couldn't even find the command I needed in the guides...
@@ПетрКравец-щ3д Thanks for asking, setting up linux video is not released. Because I am not good at linux. Open terminal and type Sudo Modprobe i2c-dev Enter Sudo gpiodetect Enter This will show the cp2112, if it is correct call the karosium software commands, also check your cp2112 is on i2c 0, if not in the i2c 0 check and change to the corresponding number. Feel free to ask any doubts.
@@AnandakrishnaSudhakaran My СP 2112 is on i2c 1 and works great with the BQ8055A Manufacturer Name: SANYO Device Name: LNV-45N104 Device Chemistry: LIO Serial Number: 25247 Manufacture Date: 2012.09.12 ---------------------------------- Cycle Count: 521 Cell 0 voltage: 3726 mV Cell 1 voltage: 3727 mV Cell 2 voltage: 3727 mV Cell 3 voltage: 0 mV I want to replace the batteries with new ones, I decided to be able to control the controller. I took a screenshot of the file with the text of the script and created it myself, but it doesn’t work, the error points to the last line. I think it's not complete. I downloaded the files, but the archive has a password. How can I recognize him?
@@ПетрКравец-щ3д archive password is bq9000, If it works with bq8055A, it will be great. That's Why I asked for a remote session. So I can confirm it and test myself. Thank you
Hello friend, tell me why, after reading the firmware and the firmware, the active button (Write_FW ) for writing the firmware in DJIBatteryKiller does not appear. I logged into the boot rom as in the video. my chip is BQ8055
I tried it and this is what the program says, it doesn’t allow me to flash or read in mode 9003 BQ30Z55 CHIP SELECTED -------------------------------------------------- -------------- Chip in Boot Mode -------------------------------------------------- -------------- BQ9003 CHIP SELECTED -------------------------------------------------- -------------- Chip is not in boot mode = 0x0502 = 1282@@AnandakrishnaSudhakaran
Thanks for the answers, but it hasn't helped yet. I tried this too, in mode 9003 with the boot mod flag turned off, the program cannot read and write the firmware. 8055 -72kb, 9003-54kb. video reviewed.@@AnandakrishnaSudhakaran
@@александералександер-ж6ф can you msg me on my instagram or facebook or telegram, we can discuss this. I need more information. Normally after enter boot mode we can write and read firmware. Need to check why you cant
Hi, using fx2lp on only windows seems easier. I saw your video doing this with bq8030 chip, so what files are needed to do the same with bq8050 ? If you have fx2lp, it would be great to make a video about bq8050 reset using it. Thank you
Unfortunately my fx2lp is broken. But i can guide you. Can you msg me any of my social media, there is a code for fx2lp to crack bq8050. I converted that code for cp2112. But it will work for fx2lp on windows.
Good afternoon. I have a question for you, is there an easy way to run a script file by another program in kali linux and how to do this, chatgpt is difficult for me. I'm just learning about this.
You need to learn how chatgpt respond to our commands, i got script for windows then i command it to convert to bash, then after a 10 different script it worked.
Hello there is no other links. software comes without the dll. But if you want i can share a 3rd party created file with all dll. But it is created by someone. I found it on the telegram. My suggession is download the missing dll files. This dll included dji killer iam not sure work or not.
Hello there is a blank SH79F329AX chip how can I program this chip I bought Sinolink Jet51a product but I can not program it can please can you support me
I will try. But I am not familiar with this debugger. Do you have a connection diagram or any information about the pinout of this debugger. If possible please send images on my instagram , facebook or mail id.
Is bq9000 and bq8050 the same? Coz when i follow the link for bq9000 its downloaed bq9000 and when i follow the link for bq8050 its also downloaded bq9000
Both have different structure but uses same instructions like bq8030. But newer type Bq8050 and Bq9000 uses sha 1 key method. Need to identify by reading 70 to 74 registers
@@AnandakrishnaSudhakaran do U have any TMR's for bq9000? I will try my luck on bq9003.. as i See the Register 70 is ManufracturInfo , 71 DAStatus and 74 GaugeStatus
BQ9000 is a cutome chip, they are not providing it, but I found that it is similar to bq40z50. Unfortunately it is actually newer type of bq9000. Old is like bq8030 Old Bq8030, 8050, 8055, 9000 , boot access is similar. But we cannot tell it just by the chip name. I suggest this Read 70, 71, 72,73 and 74.share the results. I will try
@@AnandakrishnaSudhakaran yes, I also used the bq40z50 as a reference. Unfortunately I can't read any registers at the moment because my 4th cp2112 broke... I hope the new one comes this year. Is there a way I can contact you to discuss non-public information?
по ссылке под видео кликбейт, потом ссылка на гугл диск, но доступ закрыт. просим открыть доступ. доступ открывают, но файлы в запароленном архиве. плохой человек. вся эта информация есть в открытом доступе.
Все файлы принадлежат моему имени, и я раздаю их бесплатно. Если хотите, можете развивать свой путь, я никого не заставляю его использовать. Если вы не можете получить доступ к файлам или не знаете пароль, просто спросите здесь. Я могу помочь вам. Все, что вам нужно, это спросить. Также я предоставляю ссылки, которые не являются кликбейтом, а просто показывают рекламу, которая генерирует 0,001 доллара США. Так что не ожидайте ничего простого, но вы получите это бесплатно. Тебе просто нужен файл, который я могу тебе дать. Предоставление пароля для zip-файла является обычным явлением. И не думайте, что я хороший человек. Спасибо за ваш комментарий
@@Bundesregierung_Deutschland which is your mail id, I already approved all requests, if I dont really sorry, share your mail id, or request again. Really sorry.
Its possible. But i dont know the code for that. Read and write rom is the main part. If you know how to do that we can also use available code to enter boot mode. I tried many ways but failed.
Bro Bq20z45 tech reference is available , default key is also available. I don't have that chip with me. But you can unlock it with dji battery killer and cp2112. If you have cp2112 tell me, i can do a remote session for you.
@@AnandakrishnaSudhakaran hey do we need to send same commands on bq20z40 1. Send 0x0214 to 0x71 2. Read Word X from 0x73 3. Send (0x10000 - X) to 0x71 4. Send 0x0517 to 0x70 or they are different
@@exooooo9122 they are different commands, 20z40 is different, Keys must send to 0x00 Defaults Unseal : 0414 3672 FullAccess : FFFF FFFF pf key is different, try sending these to 0x00
Thank you for sharing your research, I never worked with Linux... big problem for me but hopefully I'll manage to progress to it in the future if needed.. thank you very much again !!
If you have a fx2lp board, use it with windows. I have cp2112 only. Thanks for your comment, the linux setup will be released soon.
Another great tutorial!
Thanks for your support♥️♥️
Hello do you have a video of dji spark battery max battery capacity change to 2250mah using cp2112..
Could you please share the version of "DJi battery killer" that you use in this video? or upload to google drive?
Thanks! Got access to the chip, took only few minutes. It is 2011 Dell with sanyo fw. I can change cycle count, but not FCC as that value is not plainly visible in the EEPROM.
Share your eeprom file,
@@AnandakrishnaSudhakaran sent it to your email.
Which dell model please. I also tried with dell but unseal key not working
@@Devdev33149 open your battey and share the chip number
@@Devdev33149 M5Y0X. This video is about bruteforcing the access to boot rom mode on sanyo firmware. There is no publicly known unseal key.
do you have bq8050 with Sony firmware? i found way how to get in boot mode on it
Yes, i have i extracted it last week, found way to enter bootmode, share ur instagram or gmail. I need to know more details about it.
@@AnandakrishnaSudhakaran sent you email
Got it will check and reply u
Hello,that is good to know! I didn't find any information about this chip!!! I a waiting your precious information 🎉
Hi. It doesn't work for me. The assembly went without errors. The necessary files appeared in the directories. The device is visible using the >lsusb command. But any command in >sudo smbusb_comm --device=i2cdev:///dev/i2c-0< in the terminal error -1 :( . Everything according to the instructions. Maybe you have some advice. Can you share the script files? Maybe this will help me?
I just watched the BQ9000 video and saw the command in the terminal >sudo modprobe i2c-dev< , now everything works. I need a script, please. I don't understand programming. I couldn't even find the command I needed in the guides...
@@ПетрКравец-щ3д Thanks for asking, setting up linux video is not released. Because I am not good at linux. Open terminal and type
Sudo Modprobe i2c-dev
Enter
Sudo gpiodetect
Enter
This will show the cp2112, if it is correct call the karosium software commands, also check your cp2112 is on i2c 0, if not in the i2c 0 check and change to the corresponding number. Feel free to ask any doubts.
@@AnandakrishnaSudhakaran My СP 2112 is on i2c 1 and works great with the BQ8055A
Manufacturer Name: SANYO
Device Name: LNV-45N104
Device Chemistry: LIO
Serial Number: 25247
Manufacture Date: 2012.09.12
----------------------------------
Cycle Count: 521
Cell 0 voltage: 3726 mV
Cell 1 voltage: 3727 mV
Cell 2 voltage: 3727 mV
Cell 3 voltage: 0 mV
I want to replace the batteries with new ones, I decided to be able to control the controller.
I took a screenshot of the file with the text of the script and created it myself, but it doesn’t work, the error points to the last line. I think it's not complete.
I downloaded the files, but the archive has a password. How can I recognize him?
@@ПетрКравец-щ3д Hello, Can I see your work? How did you check if the bq8055A needs the script file? If possible can I see your pc screen remotely?
@@ПетрКравец-щ3д archive password is bq9000, If it works with bq8055A, it will be great. That's Why I asked for a remote session. So I can confirm it and test myself. Thank you
Thanks for this tutorial, was waiting for this❤
Thanks for your support ♥️♥️
where is "DJI Battery Killer GitHub Repository" ?please share new link
@@sobhyelsaady6322 there is nothing like that, just got it from a russian site
Hello friend, tell me why, after reading the firmware and the firmware, the active button (Write_FW ) for writing the firmware in DJIBatteryKiller does not appear. I logged into the boot rom as in the video.
my chip is BQ8055
Choose bq9003 and try
I tried it and this is what the program says, it doesn’t allow me to flash or read in mode 9003
BQ30Z55 CHIP SELECTED
-------------------------------------------------- --------------
Chip in Boot Mode
-------------------------------------------------- --------------
BQ9003 CHIP SELECTED
-------------------------------------------------- --------------
Chip is not in boot mode = 0x0502 = 1282@@AnandakrishnaSudhakaran
Untick check boot mode, watch my video again
Thanks for the answers, but it hasn't helped yet. I tried this too, in mode 9003 with the boot mod flag turned off, the program cannot read and write the firmware. 8055 -72kb, 9003-54kb. video reviewed.@@AnandakrishnaSudhakaran
@@александералександер-ж6ф can you msg me on my instagram or facebook or telegram, we can discuss this. I need more information. Normally after enter boot mode we can write and read firmware. Need to check why you cant
Hi, using fx2lp on only windows seems easier. I saw your video doing this with bq8030 chip, so what files are needed to do the same with bq8050 ? If you have fx2lp, it would be great to make a video about bq8050 reset using it. Thank you
Unfortunately my fx2lp is broken. But i can guide you. Can you msg me any of my social media, there is a code for fx2lp to crack bq8050. I converted that code for cp2112. But it will work for fx2lp on windows.
U are one most of genius people ❤
Good afternoon. I have a question for you, is there an easy way to run a script file by another program in kali linux and how to do this, chatgpt is difficult for me. I'm just learning about this.
Hello.
Great work!!
How can I access the archive with the script? I submitted an access request but never received it.
Approved all , pls check if not worked send a mail to my mail, pls dont share your mail id here
@@AnandakrishnaSudhakaran Thank you. I got access.
How did you generate the script via ShatGPT, I can’t understand the process itself.
You need to learn how chatgpt respond to our commands, i got script for windows then i command it to convert to bash, then after a 10 different script it worked.
Hello, I can't download the Bq9000. Can you grant me access to Google Disk?
Done
Hello, can you post the link of djikiller Battery Software? In the description the Software doesn't work because of missing .dll files...
Hello there is no other links. software comes without the dll. But if you want i can share a 3rd party created file with all dll. But it is created by someone. I found it on the telegram. My suggession is download the missing dll files. This dll included dji killer iam not sure work or not.
OK thank you, please share the link with all .dll files
for the BQ30z55 present on Asus Battery?
Which model? Pls share batt pic on my telegram, or any other social media
@@AnandakrishnaSudhakaran the laptop is an Asus X554L and the battery is a C21N1347 (7.5V, 37Wh).
this fuck**ng battery use a BQ30z55 .
thanks
Hello there is a blank SH79F329AX chip how can I program this chip I bought Sinolink Jet51a product but I can not program it can please can you support me
I will try. But I am not familiar with this debugger. Do you have a connection diagram or any information about the pinout of this debugger. If possible please send images on my instagram , facebook or mail id.
Is bq9000 and bq8050 the same? Coz when i follow the link for bq9000 its downloaed bq9000 and when i follow the link for bq8050 its also downloaded bq9000
Both have different structure but uses same instructions like bq8030. But newer type Bq8050 and Bq9000 uses sha 1 key method. Need to identify by reading 70 to 74 registers
@@AnandakrishnaSudhakaran do U have any TMR's for bq9000? I will try my luck on bq9003.. as i See the Register 70 is ManufracturInfo , 71 DAStatus and 74 GaugeStatus
BQ9000 is a cutome chip, they are not providing it, but I found that it is similar to bq40z50. Unfortunately it is actually newer type of bq9000. Old is like bq8030
Old Bq8030, 8050, 8055, 9000 , boot access is similar. But we cannot tell it just by the chip name. I suggest this
Read 70, 71, 72,73 and 74.share the results. I will try
@@AnandakrishnaSudhakaran yes, I also used the bq40z50 as a reference. Unfortunately I can't read any registers at the moment because my 4th cp2112 broke... I hope the new one comes this year. Is there a way I can contact you to discuss non-public information?
@@Bundesregierung_Deutschland Yes, i hav telegram, discord, instagram, facebook or share your id i will send request
thank friends but how unlock battery fimi mini x8 use ic 6003-001 NQ97P
Am still searching for that, hope we will find ,
@@AnandakrishnaSudhakaran okey thank friends
по ссылке под видео кликбейт, потом ссылка на гугл диск, но доступ закрыт. просим открыть доступ. доступ открывают, но файлы в запароленном архиве. плохой человек. вся эта информация есть в открытом доступе.
Все файлы принадлежат моему имени, и я раздаю их бесплатно. Если хотите, можете развивать свой путь, я никого не заставляю его использовать. Если вы не можете получить доступ к файлам или не знаете пароль, просто спросите здесь. Я могу помочь вам. Все, что вам нужно, это спросить. Также я предоставляю ссылки, которые не являются кликбейтом, а просто показывают рекламу, которая генерирует 0,001 доллара США. Так что не ожидайте ничего простого, но вы получите это бесплатно. Тебе просто нужен файл, который я могу тебе дать. Предоставление пароля для zip-файла является обычным явлением. И не думайте, что я хороший человек. Спасибо за ваш комментарий
@@AnandakrishnaSudhakaranstill waiting since 6 Weeks to getting Access. Nothing happen
@@Bundesregierung_Deutschland which is your mail id, I already approved all requests, if I dont really sorry, share your mail id, or request again. Really sorry.
How about unlocking bq8050 with only arduino board? Any possibility?
Its possible. But i dont know the code for that. Read and write rom is the main part. If you know how to do that we can also use available code to enter boot mode. I tried many ways but failed.
What's the possible unseal keys?
I tried 0414 3672 but no luck.
Can you share me all the unseal key you are aware of? It would be a great help
Hello friend, I can't download script for BQ8050. Can you grant me access to Google Disk?
send a mail to me
@@AnandakrishnaSudhakaran thanks a lot
I tried to download these scripts for an hour and it almost drove me crazy. Why can't you post normal links? Or is it fun to annoy people?
Sorry for the trouble. Share your email I will send the link
Thank you
Hi. Great gob. BQ8050 Boot ROM Script for Linux link dont work. Can you uptade? Thanks.
drive.google.com/file/d/1QNcacJaBINWQXZTn61PfQ9nmM9-M3Hx8/view?usp=drivesdk
Use this link
Bro please do something about BQ20z45
Bro Bq20z45 tech reference is available , default key is also available. I don't have that chip with me. But you can unlock it with dji battery killer and cp2112. If you have cp2112 tell me, i can do a remote session for you.
@@AnandakrishnaSudhakaran hey do we need to send same commands on bq20z40
1. Send 0x0214 to 0x71
2. Read Word X from 0x73
3. Send (0x10000 - X) to 0x71
4. Send 0x0517 to 0x70
or they are different
@@exooooo9122 they are different commands, 20z40 is different,
Keys must send to 0x00
Defaults
Unseal : 0414 3672
FullAccess : FFFF FFFF
pf key is different, try sending these to 0x00
PF Key is 2673 1712 send to 0x00 after unsealing and full access mode
Thanks for this tutorial, please upload script file bq8050
File link is there, request access i will approve
Note download my laptop 😢