Toyota 2E Timing Belt Replacement

Поділитися
Вставка
  • Опубліковано 2 лис 2024

КОМЕНТАРІ • 63

  • @bimbo-m3y
    @bimbo-m3y 10 місяців тому +2

    Salamat sayo idol malaking kaalaman po ito sa amin nanag sisimula palang na matoto salamat po

    • @DiYSpanner
      @DiYSpanner  10 місяців тому

      Salamat din sa pagbisita sa king munting tahanan.

  • @agustivalandri61
    @agustivalandri61 11 місяців тому +2

    Om mau nanya pas sy buka teming belt Starlet kapsul di bering tansioner gk ada per nya kalau gk ada apa efek nya om ...apa gk pp klu gk ada per nya di pasang lagi

    • @DiYSpanner
      @DiYSpanner  11 місяців тому +1

      Won't affect but to have a peace of mind, reinstall it. Thanks for watching bro!

    • @agustivalandri61
      @agustivalandri61 11 місяців тому +1

      Safe no back ....tank you very mach informacion 👍👍👍🙏

  • @dragonballz2889
    @dragonballz2889 Рік тому +2

    can u do a video on vacuum pipes on 2e toyota tazz 2005 1300

  • @tomasclass3845
    @tomasclass3845 3 місяці тому +1

    Do you have to take the valve cover off to replace the timing belt and water pump

  • @peternganga8149
    @peternganga8149 10 місяців тому +2

    Thank you guy

  • @jdmculture4404
    @jdmculture4404 4 роки тому +4

    What is the Valve clearence setting?my engine is sounding"tick-tick"

    • @DiYSpanner
      @DiYSpanner  4 роки тому +2

      Try 0.20 mm intake and exhaust with ENGINE HOT. Thanks

    • @jdmculture4404
      @jdmculture4404 4 роки тому +1

      @@DiYSpanner 0.20mm hot engine ticking a lot and consuming fuel
      Should i try 0.15mm for better mileage?pickup is good so far

  • @rafaelmolina127
    @rafaelmolina127 Рік тому +2

    Gracias mi hermano que Dios te bendiga en abundancia saludos de Atenas de alajuela costa rica

  • @isaganitayco
    @isaganitayco Рік тому +2

    Ser gandang gabi po bakit kada kabit po ng oil sael.sa oilpan.ay palagen durod or ser palage.etatakbo lang ng conte sera na agad.pa reply naman po

    • @isaganitayco
      @isaganitayco Рік тому +2

      Naka 3palit napo ako.sa loban ng esang linggo

    • @DiYSpanner
      @DiYSpanner  Рік тому

      Kung oil seal sa may segunyal...posible may alog na ang segunyal sir.

  • @augosttweelve5370
    @augosttweelve5370 2 роки тому +2

    wow nice video sir,,,sir may idea kaba kung anong number or ilang teeth meron ang timing belt?naputolan kc me ng TB,,nasunog yung belt dahil sa init ng idler pulley dahil nabasag ang bearing,so nawala yung number ng TB,ewan ko kung tama yung 123 teeth ng TB,TY.

    • @DiYSpanner
      @DiYSpanner  2 роки тому

      Oo sir tama 123T

    • @augosttweelve5370
      @augosttweelve5370 2 роки тому +1

      @@DiYSpanner ok sir maraming slamat...sir ask ko rin,ng naputol ang TB ko,naputol din ang racker arm sa may exhaust valve,posible kaya nabaluktot ang valve?menor lng yung takbo kasi papaliko na ako dat time.

    • @DiYSpanner
      @DiYSpanner  2 роки тому

      Oo sir posible baluktot na valve nya. Yan kadalasan nangyari sa 2e pg naputulan ng timing belt.

  • @joseortiz-hd3qp
    @joseortiz-hd3qp 3 роки тому +3

    Yun balancer sa lower right walang mark yun ?

    • @DiYSpanner
      @DiYSpanner  3 роки тому

      Wala na sir, oil pump yun.

  • @jayramba3421
    @jayramba3421 2 роки тому +2

    ask lng po, magpapalit po ksi ako timing belt ng 2e ko, isasaba ko n ksi tensioner at idler, ask lng ilam po b ang tensioner at idler ng 2e?

    • @DiYSpanner
      @DiYSpanner  2 роки тому

      1 tensioner at 1 idler sir.

  • @caylincloete4870
    @caylincloete4870 3 роки тому +1

    What is the size of the freeze plug on cylinder head for that engin

    • @DiYSpanner
      @DiYSpanner  3 роки тому +1

      Sorry i have no idea🙏

  • @junior012767
    @junior012767 2 роки тому

    Boss, diba 10 degrees before top dead, tapos nakatutok yong 2e sa butas.

  • @beergsbale3375
    @beergsbale3375 2 роки тому +1

    ano po ba ang pag kakaiba ng diesel at gasuline kasi may owner po ako naputulan ng timing belt ang dami kung nagastus

    • @DiYSpanner
      @DiYSpanner  2 роки тому

      Depende sa makina. May mga makina kasi na pag naputulan ng timing belt marami ang maapektuhan tulad ng maputulan ng camshaft at mabaluktot ang balbula.

  • @Ren-fs2qx
    @Ren-fs2qx 3 роки тому +1

    Hello po sir good pm usually ilang ikot at anong palatandaan kapag nasa tamang timing na bukod dun sa mark?

  • @ejlorenzo918
    @ejlorenzo918 2 роки тому +1

    Hi ask kolang po sir pag mahigpit po ang timing belt wala namang epekto sa takbo?

  • @mickiekatjijova4058
    @mickiekatjijova4058 Рік тому +1

    Everything is like that but the car is not stating what is the problem?.

    • @DiYSpanner
      @DiYSpanner  Рік тому

      Need to check spark from distributor going to spark plug and fuel inside the carburetor.

  • @michaelsuita7169
    @michaelsuita7169 2 роки тому +2

    Nice idea

  • @jacksonmaluleka
    @jacksonmaluleka 3 місяці тому +1

    Show me dectribut timeng

  • @mechanichoechannel8716
    @mechanichoechannel8716 3 роки тому +1

    Nice video👍🏻

  • @jhunaxcardoza783
    @jhunaxcardoza783 3 роки тому +1

    Pano pag di po naka align yung sa baba at butas sa taas yung may 2e?

    • @DiYSpanner
      @DiYSpanner  3 роки тому

      Wala sa timing sir.

    • @jhunaxcardoza783
      @jhunaxcardoza783 3 роки тому +1

      @@DiYSpanner major overhaul naba to sir?

    • @DiYSpanner
      @DiYSpanner  3 роки тому +1

      Kadalasan ang engine valve ang babaluktot pag wala sa timing, tatamaan ng piston. Top overhaul lng siguro sir.

    • @jhunaxcardoza783
      @jhunaxcardoza783 3 роки тому +1

      @@DiYSpanner kakatop overhaul pa kasi ni last month sir eh di ko rin napansin kung ganyan na ba sya dati kasi binenta lng sa akin to sir

  • @Nyet95
    @Nyet95 4 місяці тому +1

    Ini 1.3 cc ya

  • @hssello
    @hssello 4 місяці тому +1

    Why engine is shaking I think something is missing.

    • @jetrohora4664
      @jetrohora4664 2 місяці тому

      this engine is 30 years old. just a reminder.

  • @DioscoroAlpay
    @DioscoroAlpay 4 години тому +1

    Timeng mark

  • @arjoonsuthiram4247
    @arjoonsuthiram4247 3 роки тому +1

    does not help how do u read position of pulley

  • @wilsonarandia6898
    @wilsonarandia6898 3 роки тому +1

    Parang sira basta ng vvedio walang paliwagan ppaano maattuo sau.

  • @melkykaramoy7587
    @melkykaramoy7587 3 роки тому +1

    Minta wa nya boss

  • @alfredmatolo3540
    @alfredmatolo3540 3 роки тому +1

    Oder cabel