FYI - As a bowhunter and arrow maker myself. You really should grind down the shoulder you have at the butt end were the broad head meets the metal tube to make it streamlined otherwise for hunting use you will have too much resistance in that area causing less penetration. Just trying to help
Very nice, I have read about those types of nocks but this is the first time I've see anyone do it. Also for future reference, for a cleaner entry with the arrowhead you need to make the area where the broadhead meet the shafts as smooth if a transition as possible.
Wow out standing videos 👍👍 buddy good information to know how to make these thanks again take care lol that's one zombie cabbage head down 🤣 thanks again for the info.
have made two long bows and I received bow have not tried to make shafts and heads yet. my younger brother has made probably 70 or more bows and shafts and arrows heads out of about any thing you can imagine. one made of maple, one of red oak, the take down recurved bow poplar riser / red oak limbs. I hunted with compound bows over 30-35 years. made the maple self long , 41 pounds at 28 draw . first deer I was.blessed to take with it was the biggest. nicest, fattest buck I ever shot. so I sold my compound bows with those trainer wheels and stepped up to traditional archery and not went back. I will try your method for shafts and arrow heads. thanks for the information. nana and papa aka the hunter from the foothills of the blue ridge mountains in NC wishing you well.
@@weaponizer4444 because of health issues I don’t hunt and fish as much as I would love to, but that’s ok . I have been blessed, all the hunts was a fresh journey each time. new lessons and mistakes. a wealth of knowledge and skills you only get from being there. as I got older having not had to hunt to survive but knowing I could if I had to means a lot to me. I greatly enjoy helping younger hunters and fishermen and women to get the right start. I also make fishing fly’s/ lures, wood carver, knife maker, reloading ammunition for over 41 years and you could say specialize in ultra reduced center fire ammunition, and specialty ammunition. I went yesterday and shot two new pistols I really didn’t need but just wanted to add to my collection. I take it you’re from another country. iam from the United States. a little town at the foothills of the blue ridge mountains in the state of North Carolina. enjoyed sharing thoughts with you. it’s a joy to go outside in the woods and see what god’s done in his creation. nana and papa aka the hunter wishing you well.
Интересное видео. Спасибо. Закалённые наконечники можно было ещё нормализовать, что бы не были такими хрупкими. Просто в духовке при 200 градусах на час. Хотя я бы даже не стал заморачиваться с закалкой вообще, диск от циркулярки и так норм, на видео не заметно цветов побежалости при заточке. Удачи в работе.
GREAT VIDEO but I am confused about the "ferrule" area of the broadheads? Did You FLATTEN THOSE down for better penetration? SERIOUS question? Please advise! Thanks.
Excellent work sir! Penetration testing could be in a future video. The blades are beveled on both same side view. Look into sharpening of one edge per side. The side picked will assist in a torquing effect upon penetrating. Whether of bone or flesh. A static test can be done on a apple by hand. The visual effects will be seen. The apple will start splitting. The direction depends on the left vs right side beveling. The feathering of a left vs right twist fletching can further add to the torquing effect. I’ve subbed. Congrats Bigly
Hi there.... Great video... Can you pleeeeaassse tell me the draw weight of that ski bow🙏🙏🙏 oh and your cinematography skills are improving greatly.... Keep it. Up! 🤩
Great build..was wondering on the harding..did u use oil or water...a bit hard for me to tell..but good work fella..it's inspiration for a 2 a.m. build.. truly a good situation for a sharp stick..and some razors ..lol.. awesome.
Excuse me for critizising, but the "test" in the end is totally crap. And if you ask why it is crap, I easily could explain it, but (only in this case) just asking means, you better start with bees and flowers (about archery). Amazing skills anyway.
Yes, you can make a Arrow head from a saw blade that's probably indestructible,.... but it is very light. I'd opt for 1/16 metal,... it is soft,....but it only needs to be sharp when you fire it at prey. Saw blades are very hard,.... a zizz wheel is needed to cut it and a good belt grinder to shape and sharpen it. They seem to hold an edge 4 Ever. Yeah it looks like this guy has a cute little system,.... with a feral,....but for hunting the shaft tip must taper down to allow maximum penetration. I just use soft metal like David Canterbury shows because it is far easier. I didn't see him check the arrow shaft for spine weight.
You do not understand arrowheads do not go deep with a shoulder. Sad so many UA-cam videos are done by poorly skilled beginners as teachers. Same thing on Forged in Fire.
Красиво , профессионально , и технично, класс !!! Можно с такими стрелами и на охоту на дичь
FYI - As a bowhunter and arrow maker myself. You really should grind down the shoulder you have at the butt end were the broad head meets the metal tube to make it streamlined otherwise for hunting use you will have too much resistance in that area causing less penetration. Just trying to help
Those are some serious projectiles!!!
Looks heavy
Very nice, I have read about those types of nocks but this is the first time I've see anyone do it. Also for future reference, for a cleaner entry with the arrowhead you need to make the area where the broadhead meet the shafts as smooth if a transition as possible.
Good on you , A modern day Legolas! LOTR. Like they say "If you want Peace.. Prepare for War. No truer words out there.
Han quedado perfectas. Buen trabajo. Te felicito.
Loving the Robin Hoodie look 🙄
thank you
Ya know, it was great content. It gave me a direction in which to go as it relates to my making atlatl arrows/spears brother, thanks.
Wow out standing videos 👍👍 buddy good information to know how to make these thanks again take care lol that's one zombie cabbage head down 🤣 thanks again for the info.
Thanks 👍 Glad you enjoyed
খুব ভালো হইছে
Técnicas bastante criativas.
Parabéns.
Thats pretty cool.
Thank you
An quedado las puntas de flecha estupendas felicidades
Yeah saw blades work fine their just really hard work.
Genius, man making templates. So easy and brilliant. Top notch work!
Good job, nice arrows, deserve a more powerful bow and a longer distance test.
Yes I agree, new bow is in making
@@weaponizer4444 I look forward to look at it. HAve a nice day dude.
@@weaponizer4444 how many pounds of strengh?
More than this 40 pounds? Better look to make a compound then!
@@mariosebastiani3214 I've pulled more than 40 pounds classic recurve bows and japanese kyudo bows many times. 50 pounds is just about normal.
Shot my first deer at 12 years old with a cedar arrow and bear broadhead. 35lb wooden recurve. Those were the days.
Nice work :)
Thanks 😁
Sounds good :)
have made two long bows and I received bow have not tried to make shafts and heads yet. my younger brother has made probably 70 or more bows and shafts and arrows heads out of about any thing you can imagine. one made of maple, one of red oak, the take down recurved bow poplar riser / red oak limbs. I hunted with compound bows over 30-35 years. made the maple self long , 41 pounds at 28 draw . first deer I was.blessed to take with it was the biggest. nicest, fattest buck I ever shot. so I sold my compound bows with those trainer wheels and stepped up to traditional archery and not went back. I will try your method for shafts and arrow heads. thanks for the information. nana and papa aka the hunter from the foothills of the blue ridge mountains in NC wishing you well.
You're living life, I wish bow hunting is legal in my country.
@@weaponizer4444 because of health issues I don’t hunt and fish as much as I would love to, but that’s ok . I have been blessed, all the hunts was a fresh journey each time. new lessons and mistakes. a wealth of knowledge and skills you only get from being there. as I got older having not had to hunt to survive but knowing I could if I had to means a lot to me. I greatly enjoy helping younger hunters and fishermen and women to get the right start. I also make fishing fly’s/ lures, wood carver, knife maker, reloading ammunition for over 41 years and you could say specialize in ultra reduced center fire ammunition, and specialty ammunition. I went yesterday and shot two new pistols I really didn’t need but just wanted to add to my collection. I take it you’re from another country. iam from the United States. a little town at the foothills of the blue ridge mountains in the state of North Carolina. enjoyed sharing thoughts with you. it’s a joy to go outside in the woods and see what god’s done in his creation. nana and papa aka the hunter wishing you well.
beau travail la tenue des penes de la fleche est a revoir great job!
Need a more powerful bow for those heavy arrows. Nicely made👍🏻
bravissimo e congratulazioni
Awesome 😍👍👌
Thanks 🤗
Интересное видео. Спасибо. Закалённые наконечники можно было ещё нормализовать, что бы не были такими хрупкими. Просто в духовке при 200 градусах на час. Хотя я бы даже не стал заморачиваться с закалкой вообще, диск от циркулярки и так норм, на видео не заметно цветов побежалости при заточке.
Удачи в работе.
Как же наши предки обходились без духовки, просто не представляю. (ирония)
Handmade at its finest...
Keren mantap
Can you please give the entire details about the wooden shafts sticks you have used love from India
It is 12mm diameter and 80cm long beech wooden shaft
Quedaron muy chulas , pero lo único q no me gusta es el tope entre el final d la punta flecha y principio del palo. gracias x el video un saludo
Very nice. Thank you for your upload.
Thank you 👍
BIEN HECHO GRACIAS....
GREAT VIDEO but I am confused about the "ferrule" area of the broadheads? Did You FLATTEN THOSE down for better penetration? SERIOUS question? Please advise! Thanks.
Металл так не закаливают , слишком маленький нагрев. Горелкой никогда до нужной температуры не нагреешь!
कौन सी लकड़ी से तीर बनाए हो भाई ,
Very good work.
from which country are you
Hope you tempered the heads after quenching if not, very brittle. It will break on impact if you hit anything else then vegetables.
great point, I did tempered the arrow heads it but I didn't film it
Top-Work , i like it. Greetings from Bavaria ;0)) Grüßle
Thank you very much! greetings to Bavaria
Hey this is awesome man! So awesome!🔥🔥🔥
excelente!!
Muito profissional mesmo gostei muito obrigado meu irmão
Excelente trabajo !! 👍👏👏👏
Cool
I'd like to try that with old saws all blades
👍👍👍👍👍👍👍👍
Nice 👍
Thanks ✌
Nice😵💪
Thanks 🔥
A wrap before the knock with HD thread would insure No Split. If needed use a pencil sharpener and glue on plastic knocks.
Excelente
Are you ready for zombie apocalypse😎😎😎
Nice
Duuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuude!
Nicely done how many tools that you gonna To make arrows?
you could make it with angle grinder only, but it would be more time consuming
Excellent work sir! Penetration testing could be in a future video. The blades are beveled on both same side view. Look into sharpening of one edge per side. The side picked will assist in a torquing effect upon penetrating. Whether of bone or flesh. A static test can be done on a apple by hand. The visual effects will be seen. The apple will start splitting. The direction depends on the left vs right side beveling. The feathering of a left vs right twist fletching can further add to the torquing effect. I’ve subbed. Congrats Bigly
Hi there.... Great video... Can you pleeeeaassse tell me the draw weight of that ski bow🙏🙏🙏 oh and your cinematography skills are improving greatly.... Keep it. Up! 🤩
Thank you 😊
The draw weight is about 40 pounds
@@weaponizer4444 You might consider making a can forge; bit more efficient for the heat treatment.
رائع
Did you make the bevel jig?
I did
ua-cam.com/video/yZ3iJ4QPH_8/v-deo.html
Use that blue colored painter's masking tape. Easier to remove.
where I live they sell only this kind, or maybe I couldn't find it in sale
Всем привет ✌️!!! столько Труда 🤔!!!чтоб найти болото и в этом болоте суженную🐸)))!
Читайте русскую сказку ,, Царевна лягушка,,!!!
@@alekssax5370 😅
gREAT!
Awesome
Thanks 👍
letal
Nice arrows but I really don't like your choice of target though.
Which ones?
You should of put 5 inch barred feathers on them
👌👌👌👌
Thanks! 😊
Kitne pese lage GE me dene ko taiyar hu
Aparentemente ficou muito boa,
Great build..was wondering on the harding..did u use oil or water...a bit hard for me to tell..but good work fella..it's inspiration for a 2 a.m. build.. truly a good situation for a sharp stick..and some razors ..lol.. awesome.
thank you, I used oil
@@weaponizer4444 thank you for it response..I don't have any pics..but mine turned out just right..again thanks
Muốn mua 3 cây bao nhiêu tiền vậy bạn
hello what thickness of arrows is necessary or safe to hussar for a 60 pound bow thanks to whoever responds
Desde Spain
12mm
with all those power tools it is normal to make them so easy and fast
👌🏼🔥
Thank you
Excuse me for critizising, but the "test" in the end is totally crap. And if you ask why it is crap, I easily could explain it, but (only in this case) just asking means, you better start with bees and flowers (about archery).
Amazing skills anyway.
Como fazer prá comprar dessa flechas e qual o valor?
Да ты "Рэмбо".
Giá tên bn k 1 tên
Nicely made but it's too heavy, the front and back of the arrow must be equal weight for long range.
Good point!
What is the diameter of the arrows?
bien mais il faut être bien équiper pour la fabrication de vos flèches
😅 pregunta, a dónde se puede comprar, en Argentina
Está muy buena.
Thank you 😄
👏👍👍👏🇰🇿🇰🇿
Qual ė esta cola q vc usou p colar a ponteira
Are you selling Does aarows
Good job but to fat arrow wood man that should be thicker
Somebody will die from this, it is very dangerous.⚠️☠️☠️☠️☠️☠️
Bhai apse ak bat puchni thi
Apne kaman me kon se rabar lagai h
Yes, you can make a Arrow head from a saw blade that's probably indestructible,.... but it is very light.
I'd opt for 1/16 metal,... it is soft,....but it only needs to be sharp when you fire it at prey.
Saw blades are very hard,.... a zizz wheel is needed to cut it and a good belt grinder to shape and sharpen it.
They seem to hold an edge 4 Ever.
Yeah it looks like this guy has a cute little system,.... with a feral,....but for hunting the shaft tip must taper down to allow maximum penetration.
I just use soft metal like David Canterbury shows because it is far easier.
I didn't see him check the arrow shaft for spine weight.
To do ironhead y do not need hardened steel ok,,,
ROBIN HOOD
I'll just buy the factory made.
time is money
👍🌹🔴
Thank you
Fick! Good job, I like it ….but… couldn’t penetrate a cabbage…..wtf
Template Arrow?
10 ok
Der Kohlkopf ist tot.
Keren :)
Where do you live - so I don't burgle there
Chou bola presisao
You do not understand arrowheads do not go deep with a shoulder. Sad so many UA-cam videos are done by poorly skilled beginners as teachers. Same thing on Forged in Fire.
सप्लाय मि
Buen trabajo y todo , pero no das medidas de nada.. 🖓🖓🖓🖓
andarilho