If you haven’t tried 22ple VM1, then give it a go. It costs a little more but I have been impressed with it over Gyeon Rim, Carpro DLUX, GTechniq C5. The only downside is the wait time in between coats.
am not that close mi first goal is to clean the corsa after the winter i order from croftgate uk trim restore and final detail brushed .the wheels are at dealer i have winter wheels black steel wheels allow wheels put on in march April i believe and for summer time going to order this www.kabelshop.nl/image/Toolland_Rugspuit_-_Toolland_16_Liter_3_verschillende_spuitkoppen_DT20016_K170113205_big.jpg wheels like both black give other look
Great review and video Brian. Couldn’t have came at a better time looking to buy a Camaro SS this summer and can’t wait to do a full detail on it. Getting all the goodies ready for it , love your videos and all that you do.
I enjoy when taking the wheels off and while I coat them I really get into the fender well. The brake calipers and the finished product is a 💎You have done a diamond of a job on your Corvette ✊💎
Love it! A little tip for Gyeon Tire is to heat the rubber first to open pores and then apply Tire on surface. Lasts longer as I proved myself. Great job as usual Bryan 🤘👊
Brian always a wealth of Knowledge! Also a Fantastic look for your car! Though I think the Silver wheels just throw a little more attention than the black wheels. But it's your car! Both look Fantastic!
I have an all-black 370Z sport coupe and I'm in the process also of blacking out the bright metal trim and wheels. Your Vette definitely looks better with the blacked-out wheels.
Brian I’m here watching this as I’ve been disappointed with gyeon rim and dlux, after all that work removing wheels, the coatings barely lasted 4 months and this was on both my daily drivers with ceramic brakes which don’t have that build up of corrosive brake dust
As my aluminum whls on my Explorer became dull & oxidized effecting the clearcoat, i found a shop in Michigan that refurbished them with a PVD process & clearcoat. Would that work also for them? Other recommendations? They said at the time never clean them with any product that you wouldn't also use on your auto paint.
Brian, at 7:31 minutes you mention blacking out the rear emblem and side reflectors and I have got to ask what your process is. Maybe a subject for another video. I've done a few and results were mediocre to bad.
Hey Brian, awesome vid. What wheel stand do you have in this video and would you recommend the one you have or another one? Thanks for all you do, keep up the great vids!!
It's an old variant of my stand the Cycloshine Pro Wheel Detailing stand! I have a new model out on my site you can find if you search for Source Garage and have some videos on my channel of it in use
@@ludensoldetailing It's an old variant of my Cycloshine Pro Wheel Detailing stand! I have a new model out on my site you can find if you search for Source Garage and have some videos on my channel of it in use
Will this work on matte finish wheels? If not, what do you recommend? I have a Toyota TRD that gets a off road dust/dirt/mud and would like a way to protect them and make it easier to clean.
Nice car, Brian, and great workmanship! I will never understand why C7 owners buy a base model or, Grand Sport only to sink thousands of dollars trying to make it look like a ZO6. Just buy the ZO6 already, lol
It's an old variant of my stand the Cycloshine Pro Wheel Detailing stand! I have a new model out on my site you can find if you search for Source Garage and have some videos on my channel of it in use
It's an old variant of my stand the Cycloshine Pro Wheel Detailing Stand! I have a new model out on my site you can find if you search for Source Garage and have some videos on my channel of it in use
Great video. How well does the wheel coating work for drake dust? My '16 Z06 has tragic amounts, and I have CQuartz Finest on my wheels (and the whole car) , is this a better product for cleaning brake dust?
Love the car! Black is very nice, and modern, but I have a place in my heart for my favorite wheel growing up, chrome Cragar SS 5 spoke ,the classic wheel for me. My Grand Sport has the black, makes the red calipers pop. Do you typically apply a topper to this coating or leave it as a stand alone?
How in the world do you post videos on exactly what I’ve been trying to research, for the past 2 weeks? I got rid of my C7 and my new car has painted black wheels.
Apex Detail I did. I traded my C7 for a Sonic Gray Pearl Civic Type R. They hold their value so well, I figured it would be a better investment than my Corvette, since the value went down so much when the C8 was announced. I’ll be giving that to my son, when he graduates HS next year. I’m in California, he’s in Florida, so I can keep it from him seeing it. Then I’ll get a C8 when the Z06 comes out. My child support payment will become the Civic car payment. Making way for my C8. 🙌🙌🙌
Brian,i noticed you were using a wheel detail caddy to spin/detail the wheel.What is the name of that product where did you get it?Thanks in advance.P.S. NICE car!
Hi Brian... I have an urgent question as i have just received my wheels Vossen HF-5. As i haven't received the tires can i go ahead and coat them now or it is better to wait until they are mounted on the tires? I already receive the IGL.Also should i apply clay bar to clean them up a little or just a spray cleaner is enough?Thanks in advance...
Hey Brian, how do you find IGL products? I'm from Malaysia and since IGL is a Malaysian company, it would be easy to get them. Are they on par with offerings from Carpro, Gyeon etc?
Would you ever do a review on Garry Dean's products? Seems like none of the detail UA-camrs review his products. I'm interested to see someone else's opinion other then his on his own product.
Hey Brian, just wanted to ask if you've tried Soft99 Japan King of Gloss Dark Color Car Wax? Reason why I ask is because it has the same amazing properties of fusso coat, but the smell is 100% better, has more depth, richness, gloss, the same amazing water behavior, and self-cleaning properties. It's only drawback is that it will only last 4-6 months instead of the 9-12 months fusso can. Soft99 Japan King of Gloss is the best topper to go on top of Fusso coat, guaranteed.
you are hurting my feelers, I love chrome/ polished aluminum. When I had my 07 Ram, I bought Mother's aluminum and Mag polish to clean the face of the wheel. I was sorta bummed out by the plastic overlay. Vettes are always cool, anyways. Q: How would a wheel coating do on chrome bumpers(I do plan on swapping my painted bumpers for chrome) and chrome stainless exhaust tips?
Can you do reviews on Dura-Coating Technology products? You speak the truth on products so want to see if it's another scam company or legit good stuff they put out. Thanks!
What is YOUR Favorite wheel/rim caliper protectant?
What you think of Gyeon rim?
I got great results with Carpro DLux.
If you haven’t tried 22ple VM1, then give it a go. It costs a little more but I have been impressed with it over Gyeon Rim, Carpro DLUX, GTechniq C5. The only downside is the wait time in between coats.
Apex Detail IGL Eco Wheel just purchased it. I tried others but this is the best ✊Thanks to you 💎✊
am not that close mi first goal is to clean the corsa after the winter i order from croftgate uk trim restore and final detail brushed .the wheels are at dealer i have winter wheels black steel wheels allow wheels put on in march April i believe and for summer time going to order this
www.kabelshop.nl/image/Toolland_Rugspuit_-_Toolland_16_Liter_3_verschillende_spuitkoppen_DT20016_K170113205_big.jpg
wheels like both black give other look
Great review and video Brian. Couldn’t have came at a better time looking to buy a Camaro SS this summer and can’t wait to do a full detail on it. Getting all the goodies ready for it , love your videos and all that you do.
Corvette is looking great! Coming along very nicely!
The C7 looks mean as hell B!!👍
That vette is crazy beautiful! It’s in the hands of the best owner. 👍
Looks like the Batmobile! Very cool Brian. We gotta hear what she sounds like sometime.
The blackout look is sick as hell.
Absolutely gorgeous!! Definitely makes me double think about getting that Stingray!!
I enjoy when taking the wheels off and while I coat them I really get into the fender well. The brake calipers and the finished product is a 💎You have done a diamond of a job on your Corvette ✊💎
Big D Thanks... very satisfying getting the wheel arches cleaned up.
Ordered SuperSport so will try that when weather warms up. Great video as usual
Enjoy the fruits of you're labor. The vehicle looks delicious. 🍻
Once again you've proven you have great taste in cars, color and correction! I've not made t to my wheels yet but like very much how yours turned out.
Love it! A little tip for Gyeon Tire is to heat the rubber first to open pores and then apply Tire on surface. Lasts longer as I proved myself. Great job as usual Bryan 🤘👊
Royal Detailing Afta GREAT tip!👍👍
Brian always a wealth of Knowledge! Also a Fantastic look for your car! Though I think the Silver wheels just throw a little more attention than the black wheels. But it's your car! Both look Fantastic!
Getting to look closer and closer to my 2017 Grand Sport. It’s completely black on black, as well as the brake calibers
Great video... looks better with the black wheels.
I have been looking at IGL products a lot more lately..
Black looks better for sure👌🏼
Glad to see you are still using the stand Brian and great videos as always!
Source Garage absolutely... daily in fact. And thank you once again.
@@apexdetail85 I can always tell when you've uploaded a video with it because I see a spike in store traffic! Thanks a ton.
Good choice going to the black rims. Looks so much nicer in my opinion. Thanks Brian
I use igl as well and works great
Liked before watching
I have an all-black 370Z sport coupe and I'm in the process also of blacking out the bright metal trim and wheels. Your Vette definitely looks better with the blacked-out wheels.
Love the black rims. Thanks for shearing.
Going to have this done to my 3 piece mesh wheels Im rebuilding to help the wheels clean a lot better and stay cleaner.
Man that car is sick!
Yes! I like those rims !!! Much better!👏🏻
Nice wheel choice, looks great Brian 👍😁
Corvette looks nice
That vette is sweeeeeeeet! Do you have to wear shades with all that gloss!😎
Brian I’m here watching this as I’ve been disappointed with gyeon rim and dlux, after all that work removing wheels, the coatings barely lasted 4 months and this was on both my daily drivers with ceramic brakes which don’t have that build up of corrosive brake dust
As my aluminum whls on my Explorer became dull & oxidized effecting the clearcoat, i found a shop in Michigan that refurbished them with a PVD process & clearcoat. Would that work also for them? Other recommendations? They said at the time never clean them with any product that you wouldn't also use on your auto paint.
Timm Sieber this would work for them as well.👍
@@apexdetail85 Sounds like a good project once it warms up in Indiana. How long would the wheel coating last?
I can't wait to see what it looks like when you're done with the Vette.
Brian, at 7:31 minutes you mention blacking out the rear emblem and side reflectors and I have got to ask what your process is. Maybe a subject for another video. I've done a few and results were mediocre to bad.
Just went to same oem black gloss spoke from high pvd oem chrome Hollanders
Hey Brian, awesome vid. What wheel stand do you have in this video and would you recommend the one you have or another one? Thanks for all you do, keep up the great vids!!
Following
Yes! What wheel stand!?
It's an old variant of my stand the Cycloshine Pro Wheel Detailing stand! I have a new model out on my site you can find if you search for Source Garage and have some videos on my channel of it in use
@@ludensoldetailing It's an old variant of my Cycloshine Pro Wheel Detailing stand! I have a new model out on my site you can find if you search for Source Garage and have some videos on my channel of it in use
It is a first gen from Source Garage... I highly recommend!
What happens if you just leave it on the alloy, 8fbthey are silver
Will this work on matte finish wheels? If not, what do you recommend? I have a Toyota TRD that gets a off road dust/dirt/mud and would like a way to protect them and make it easier to clean.
TheAverageJoe yes... it tends to make them darker... but not glossy. There are dedicated satin finish coatings available as well.
Where did you get your stand for your tire to spin it to detail it
Nice car, Brian, and great workmanship!
I will never understand why C7 owners buy a base model or, Grand Sport only to sink thousands of dollars trying to make it look like a ZO6.
Just buy the ZO6 already, lol
The black wheels look so much better.
I’m new to coatings and was wondering if you recommend the IGL wheel coating for protection on stainless exhaust? Thanks for your insight.
Following
I would lean more towards Eclipse. But yes that would work very well indeed.
Thank you!!!
Where did you get the rolling wheel stand?
nytahoe03 , Source Garage
Can you put a wheel.coating on paint and glass. Just wondering
Brent Roper Absolutely
nice. you should spray paint those weights black
Another great video Brian. Thanks for your great responsiveness to questions. Who makes that wheels stand ? Thanks
It's an old variant of my stand the Cycloshine Pro Wheel Detailing stand! I have a new model out on my site you can find if you search for Source Garage and have some videos on my channel of it in use
☝🏼I highly recommend.
How can you remove imperfections from painted wheels? My fuel wheels have small scratches and am unsure what to do with them.
Jason Hubbard I use my 2 inch pneumatic polisher on them.
They will polish out just like clear coat on a car body then?
Nice wheel choice!
It’s a personal preference but l run both sets a black set and a chrome set. I get more compliments when the chrome wheels are on my 2017 white Z06.
AWSMDAD52 I agree .. I am keeping both.
What whee stand is that?
It's an old variant of my stand the Cycloshine Pro Wheel Detailing Stand! I have a new model out on my site you can find if you search for Source Garage and have some videos on my channel of it in use
I wonder if this is more durable than gyeon rim? Thanks.
Great video. How well does the wheel coating work for drake dust? My '16 Z06 has tragic amounts, and I have CQuartz Finest on my wheels (and the whole car) , is this a better product for cleaning brake dust?
Not going to black out the calipers?
How many sets can you cover with 30ml of this coating? I was hoping to be able to double layer my 18” wheels plus calipers.
Love the car! Black is very nice, and modern, but I have a place in my heart for my favorite wheel growing up, chrome Cragar SS 5 spoke ,the classic wheel for me. My Grand Sport has the black, makes the red calipers pop. Do you typically apply a topper to this coating or leave it as a stand alone?
How in the world do you post videos on exactly what I’ve been trying to research, for the past 2 weeks? I got rid of my C7 and my new car has painted black wheels.
Gregg Walmsley what did you sell the C7 for? C8?😁
Apex Detail I did. I traded my C7 for a Sonic Gray Pearl Civic Type R. They hold their value so well, I figured it would be a better investment than my Corvette, since the value went down so much when the C8 was announced. I’ll be giving that to my son, when he graduates HS next year. I’m in California, he’s in Florida, so I can keep it from him seeing it. Then I’ll get a C8 when the Z06 comes out. My child support payment will become the Civic car payment. Making way for my C8. 🙌🙌🙌
Brian,i noticed you were using a wheel detail caddy to spin/detail the wheel.What is the name of that product where did you get it?Thanks in advance.P.S. NICE car!
I am a truck driver and like to have shiny aluminum wheels. Once I apply a polish, would a wheel coating help keep them shiny?
Stephen M coatings do not get along with aluminum very well... I like sealants instead on them.
@@apexdetail85 Thanks for the reply!
Forgot to ask have you tried Xtreme solutions LVR 404.
John Pivovarnik yes... love it.
Hi Brian... I have an urgent question as i have just received my wheels Vossen HF-5. As i haven't received the tires can i go ahead and coat them now or it is better to wait until they are mounted on the tires? I already receive the IGL.Also should i apply clay bar to clean them up a little or just a spray cleaner is enough?Thanks in advance...
Do you have a review or feedback about Geyon Rim?
Car looks great 👍
Hey Brian, how do you find IGL products? I'm from Malaysia and since IGL is a Malaysian company, it would be easy to get them. Are they on par with offerings from Carpro, Gyeon etc?
What do you recommend for cleaning and protecting of door and trunk etc seals?
Charlie Kemp I use TAC Moonlight. Multi X to clean them.
@@apexdetail85 thank you sir!
Black rims look 10x better!👌🏻
Hey what type wheel holder you have?
I didn't see you out eclipse on?
What do you recommend on tyre dressing that doesn't absorb dust?
solomon8864 a water based dressing would be best for that.
Beautiful car
Would you ever do a review on Garry Dean's products? Seems like none of the detail UA-camrs review his products. I'm interested to see someone else's opinion other then his on his own product.
Hey Brian, just wanted to ask if you've tried Soft99 Japan King of Gloss Dark Color Car Wax? Reason why I ask is because it has the same amazing properties of fusso coat, but the smell is 100% better, has more depth, richness, gloss, the same amazing water behavior, and self-cleaning properties. It's only drawback is that it will only last 4-6 months instead of the 9-12 months fusso can. Soft99 Japan King of Gloss is the best topper to go on top of Fusso coat, guaranteed.
XxVendetaxX1 yeah... it’s durability was a huge let down.😞
you are hurting my feelers, I love chrome/ polished aluminum. When I had my 07 Ram, I bought Mother's aluminum and Mag polish to clean the face of the wheel. I was sorta bummed out by the plastic overlay. Vettes are always cool, anyways. Q: How would a wheel coating do on chrome bumpers(I do plan on swapping my painted bumpers for chrome) and chrome stainless exhaust tips?
Donald Green coatings on chrome are a pain... but can protect well.
How long does the Gyeon tyre dressing roughly last for?
Ptheledge a few weeks in my area. But longer than most. It rains here almost daily this time of year.
How long will the wheel coating last?
Evil Fingers a year or so. Most advertising 2 to 3 years.. but never makes it that far.
Brian, have you tried Ceramic Pro Wheel & Caliper Coating?
Frederick Williams one of my part timers let me try it. I personally prefer IGL for those areas.
Apex Detail was it just the installation or the performance?
Can you do reviews on Dura-Coating Technology products? You speak the truth on products so want to see if it's another scam company or legit good stuff they put out. Thanks!
Black much better. Sharp looking Vette.
Nice!
Alsome love black
Question: Will you ever cave on the Jaguar banner? :)
It will be completely replaced very soon.😁
Why’s it all black not white please tail
Sorry Brian great car but I think the chrome looks better. To each his own 🔔🔔🔔🤢🤢🤢🤢
Bryan you have a bat mobile lol
Old South Auto Detail 😂pretty much.
Where do you get the tire/wheel holder?
Where get that wheel holder at?