I've been in huge discussions with both my dealer and KTM Netherlands. Both are not aware that there is a sensor missing. Rediculous its not in the kit.
it was in the previous model of SAS, but in my opinion by mistake it was removed from the kit. If I remember well it costs 20E. If you will not install it, alarm will be reporting error constantly. In my case I was informed by dealer about the situation.
Damn, I didn't know this- thx. OK, where do I plug the lead, there isn't an extra socket on the alarm, is there a wiring harness cable I need to find? Found it, 12 seconds into your video, that cable from the harness loom, it was 100% hidden on my bike until I cut the single thick cable tie that held everything together in that area, then I found it. All your measurements were correct and I am now a happy rider. Thank you.
I had same question, damn difficult. Configuration is made via number of on and off's of the ignition, if you have a key maybe doable, but with button, I'm sure it will end up with ECU failure ;-)
La ktm1290S 2021-22 lleva ya El conector con el cableado instalado en la moto ? Solo se compra ña central de alarma ktm y el kit de montaje y ya esta ?
Hi I have the same problem when I alarm my motorbike and thought the alarm did not sound wright. Thanks for putting up the video, realy helpful. Unfortunately when I confronted my local KTM dealer who fitted the alarm the service manager was not even aware you could get reed switch for the alarm for this model motorbike! My problem is the KTM user manual states "If the optional alarm system is installed, the RACE ON indicator light 1 flashes red when the alarm system is switched on". The problem I have is my motorbike the led light does not activate at all! So I am in a bit of a dilemma as your UA-cam video shows the ready to race light lighting up when arming the alarm and when I tried to show the KTM service manager your UA-cam video he just said I don't watch UA-cam and flatly refused to watch it! So did you have to anything special to get the Ready to Race led to light up and after fitting the reed switch are you having any issues with its placement? Alarm model code is KTM Ref: 60112035000 is this the same alarm?
I did exactly steps like on the video, no configuration, activation or anything. Just plug the sensor into connector from alarm device and that's it. This error beeb is about missing seat sensor, so if installed, then just works as it should.
@@grzegorzlubrzynski so from the off your red led light on the dash flashes when the motorbike alarm is set? Do you know if the KTM dealer did anything special to activate the red led light as I have nothing at all and the KTM manual says it should light up but UK KTM say it an error in the manual!
@@grzegorzlubrzynski Dzięki serdeczne. Dla mnie pomysł KTM'a z tym siedzeniem na przycisk, a po drugiej stronie bezproblemowe awaryjne otwieranie to jakaś bzdura. Na dodatek wraz z motocyklem kupiłem oryginalny alarm, ale w salonie powiedziano mi że nie ma czujnika otwarcia siedzenia i nie ma takiej możliwości.... Echhhhh.
@@bartomiejpiekarz9678 dlatego ten czujnik ma sens, a z drugiej strony zdarzyło mi się już użyć linki, bo aku padło. Tą linke można znacznie skrócić tak żeby trzeba było użyć narzędzia. Generalnie mam taki plan właśnie, wrzucę na YT.
Sprawdzalem przy motocyklu, jednak bezpośrednio w alarmie nie ma złącza pod taki czujnik. Czy należy go podłącz do gniazda z jednym bokiem trójkątny w jednej z wiązek ?
Cześć mam pytanie Te dwie kostki muszą się stykać? U mnie gdy tak zrobię nie domyka się się siedzenie.kosta na kostkę to jakieś 3m więcej niż dystans między spodem siedziska a poprzecznym wspornikiem do którego przykręcany jest sensor
I've been in huge discussions with both my dealer and KTM Netherlands. Both are not aware that there is a sensor missing. Rediculous its not in the kit.
it was in the previous model of SAS, but in my opinion by mistake it was removed from the kit. If I remember well it costs 20E. If you will not install it, alarm will be reporting error constantly. In my case I was informed by dealer about the situation.
@@grzegorzlubrzynski yeah most frustrating is that both the importer and dealer dont know anything
Cześć , jeździłeś może multi v4s? Szukam opinii :)
nie, ale dużo jeżdżę z kolegą na V4s 🙂
Damn, I didn't know this- thx. OK, where do I plug the lead, there isn't an extra socket on the alarm, is there a wiring harness cable I need to find? Found it, 12 seconds into your video, that cable from the harness loom, it was 100% hidden on my bike until I cut the single thick cable tie that held everything together in that area, then I found it. All your measurements were correct and I am now a happy rider. Thank you.
bonjour avez vous toujours cette alarme elle fonctionne toujours bien depuis 2 ans ?
yes, no issues.
Question; can you change the sounds of the alarm? My dealer said it is possible but I do not have a clue how to do it
I had same question, damn difficult. Configuration is made via number of on and off's of the ignition, if you have a key maybe doable, but with button, I'm sure it will end up with ECU failure ;-)
La ktm1290S 2021-22 lleva ya El conector con el cableado instalado en la moto ? Solo se compra ña central de alarma ktm y el kit de montaje y ya esta ?
yes, everything is there, you just need to connect the sensor. This time sensor was not included in the kit.
R those spoked rims of same size as the stock alloys ??
yes
Hi I have the same problem when I alarm my motorbike and thought the alarm did not sound wright. Thanks for putting up the video, realy helpful. Unfortunately when I confronted my local KTM dealer who fitted the alarm the service manager was not even aware you could get reed switch for the alarm for this model motorbike!
My problem is the KTM user manual states "If the optional alarm system is installed, the RACE ON indicator light 1 flashes red when the alarm system is switched on". The problem I have is my motorbike the led light does not activate at all! So I am in a bit of a dilemma as your UA-cam video shows the ready to race light lighting up when arming the alarm and when I tried to show the KTM service manager your UA-cam video he just said I don't watch UA-cam and flatly refused to watch it! So did you have to anything special to get the Ready to Race led to light up and after fitting the reed switch are you having any issues with its placement?
Alarm model code is KTM Ref: 60112035000 is this the same alarm?
I did exactly steps like on the video, no configuration, activation or anything. Just plug the sensor into connector from alarm device and that's it. This error beeb is about missing seat sensor, so if installed, then just works as it should.
@@grzegorzlubrzynski so from the off your red led light on the dash flashes when the motorbike alarm is set? Do you know if the KTM dealer did anything special to activate the red led light as I have nothing at all and the KTM manual says it should light up but UK KTM say it an error in the manual!
Czujnik podłącza się do centrali alarmowej? Jest przygotowane na ten czujnik złącze?
tak
@@grzegorzlubrzynski Dzięki serdeczne. Dla mnie pomysł KTM'a z tym siedzeniem na przycisk, a po drugiej stronie bezproblemowe awaryjne otwieranie to jakaś bzdura. Na dodatek wraz z motocyklem kupiłem oryginalny alarm, ale w salonie powiedziano mi że nie ma czujnika otwarcia siedzenia i nie ma takiej możliwości.... Echhhhh.
@@bartomiejpiekarz9678 dlatego ten czujnik ma sens, a z drugiej strony zdarzyło mi się już użyć linki, bo aku padło. Tą linke można znacznie skrócić tak żeby trzeba było użyć narzędzia. Generalnie mam taki plan właśnie, wrzucę na YT.
Sprawdzalem przy motocyklu, jednak bezpośrednio w alarmie nie ma złącza pod taki czujnik. Czy należy go podłącz do gniazda z jednym bokiem trójkątny w jednej z wiązek ?
@@grzegorzlubrzynski Widziałem również takie rozwiązania, że obudowę po stronie tej linki niektórzy przykrecali na stałe.
Hola,donde se conecta el cable del sensor?
under the seat there are cables fitting only to that sensor, easy
@@grzegorzlubrzynski
Puedes poner una foto,tengo la SAS 2020 y no lo veo?gracias
Hey, where are the spoked wheels from? Thanks!
KTM power parts.
lo peor que se puede comprar,,, el s1 plus 1000 kms ha durado la bateria, holgura por todos lados, peligroso,
mine, 30kkm and still same battery, miracle?
where u got the fenders from?
fenders of what? if the wheels fenders, they are oem
Cześć mam pytanie
Te dwie kostki muszą się stykać? U mnie gdy tak zrobię nie domyka się się siedzenie.kosta na kostkę to jakieś 3m więcej niż dystans między spodem siedziska a poprzecznym wspornikiem do którego przykręcany jest sensor