If I may ask, if I'm installing a wifi box to a set up like this would it be to the pool pump or the gfi circuit. And how does that interact with the pool heater?
Hi, thanks for the video. This question's a bit off topic but here goes: For an indoor pool I can use gas heating for the water, if I wanted, so the only necessary piece of electrical equipment would be the pump to keep the water passing through a filter, is that right? Obviously lighting and other peripherals aside. I could use UV chlorination but don't need to - the only electrical thing I actually need is the pump? I'm doing a electrical course project with a swimming pool so it's the electrical wiring I'm interested in and don't want to add unnecessary complications. Thanks. : )
Hmmm question. I have one of those and I'm gonna install a small 20amp mini split to my home. But the main panel is so far away it's gonna be a pain. Meanwhile the pool subpanal is right where I need it. Could I add a 20amp double breaker to the subpanal instead of running an all new wire and quick disconnect over 150ft
Is pool pre-wiring/electrical on a new construction home done with the builder is it more or less cost effective versus doing it through a pool company?
Should be about the same. The important piece is that the home is built with a large enough electrical service entering the house to support an additional pool electric panel. So often homes are built with a service and main panel that can only just barley serve the house itself with no extra room.
This particular model will. Each button is a separate relay in the panel. On or Off. The new ones do some color changing and will cycle power but im not sure what color order they are using. I know that it is not Pentair.
Automation can not be added to this panel. BUT a Pentair inteliconnect could be added to the whole system. That is an add on that would compliment this load center quite nicely to give you some control and lite automation.
you are fantastic at instruction, kudos. I am a certified professional pool/spa and I learned a ton from these.
Thank you Chris!!!!!
Omg! U just saved me some money. As soon you said check the reset button ,The pool started back up again. So thank you 🙏
Perfect!!!!
I appreciate this video I’m curious is this type of panel also used for unground/ custom built jacuzzis too.
If I may ask, if I'm installing a wifi box to a set up like this would it be to the pool pump or the gfi circuit. And how does that interact with the pool heater?
Should be installed by a licensed electrician. Designated GFCI breaker.
Hi, thanks for the video. This question's a bit off topic but here goes: For an indoor pool I can use gas heating for the water, if I wanted, so the only necessary piece of electrical equipment would be the pump to keep the water passing through a filter, is that right? Obviously lighting and other peripherals aside. I could use UV chlorination but don't need to - the only electrical thing I actually need is the pump?
I'm doing a electrical course project with a swimming pool so it's the electrical wiring I'm interested in and don't want to add unnecessary complications.
Thanks. : )
Hmmm question. I have one of those and I'm gonna install a small 20amp mini split to my home. But the main panel is so far away it's gonna be a pain. Meanwhile the pool subpanal is right where I need it. Could I add a 20amp double breaker to the subpanal instead of running an all new wire and quick disconnect over 150ft
Does that panel have the light transformer in it ?
Yes it does. The panel controls the transformer and lights.
Is pool pre-wiring/electrical on a new construction home done with the builder is it more or less cost effective versus doing it through a pool company?
Should be about the same. The important piece is that the home is built with a large enough electrical service entering the house to support an additional pool electric panel. So often homes are built with a service and main panel that can only just barley serve the house itself with no extra room.
Will the panel and remote work with Haywood color logic 4.0 120v lights
This particular model will. Each button is a separate relay in the panel. On or Off. The new ones do some color changing and will cycle power but im not sure what color order they are using. I know that it is not Pentair.
What is the name of the Panel? Where can I order the panel? How much is the Panel? Can you add a second timer for the sprinkler?
You can add or purchase a unit with an additional timer from the factory. It is called a Wiretran 2
Can an automated system be added to this panel
Automation can not be added to this panel. BUT a Pentair inteliconnect could be added to the whole system. That is an add on that would compliment this load center quite nicely to give you some control and lite automation.
What type of material is the box made of? Nema 3 or metal? I prefer Nema 3.
It is metal enclosure.
What is the name of this panel ? Or the brand/manufacturer
WPC2 from SR Smith
How much is this Panal
Nice
It is GFCI not GFI
I appreciate the details........Ground Fault Circuit Interrupt (GFCI) or Ground Fault Interrupt (GFI) ARE BOTH CORRECT