I have this gun and I love it so much. Don't let the plastic turn you away, I fell down a very large hill in the middle of a skirmish with my Tavor (Which I have named Naomi) and it flew really far away and hit a few rocks. It was covered in mud when I found it and was only scratched a little. This really impressed me because I thought I had broke it for sure. I also thought the internals would get screwed up when I found it, because I had the bolt locked back to disable the EBB function to give me a slightly higher ROF. That happened almost a year ago and it still works great today. Also it has great range stock with .28 and even .25s. I'd recommend this gun to anybody playing Airsoft in any environment.
PwngeBdaman Is wear and tear easy to fix and/or not ultra expensive? Like say I used a 10.8v (or 11.1v lipo) and got some wear and tear on the gun and took it in to the airsoft shop to have fixed, would that be a reasonable expense, or something that would break the bank?
Dreaklock mosfets usually are pretty pricey ($20-100). some you just plug into your battery and tamiya connection, some you have to go into the gearbox and do.
Bintu Beain Yeah, it would be good for cqc. The bullpup design makes it have a fairly compact design in terms of barrel length or overall size in comparison to an M4, M16, SCAR, or most other STANAG based platforms (besides compact rifle designs obviously). You'll have an easy time hitting targets be it turning a corner or nailing a target down a longer hallway. The only thing to really get used to is the magazine location/release and the rather long trigger pull. The velocity by the sounds of it sound fairly cqc safe, most being around 350-400fps.
Im m4 platform all the way.... its a nice style of gun a friend of mine has this gun.... i just dont like it.... i like to stick with m4 m16 ar15 platforms personal choice.... but from everyone i know that has either shot this or owns it loves it
I have this gun and I love it so much. Don't let the plastic turn you away, I fell down a very large hill in the middle of a skirmish with my Tavor (Which I have named Naomi) and it flew really far away and hit a few rocks. It was covered in mud when I found it and was only scratched a little. This really impressed me because I thought I had broke it for sure. I also thought the internals would get screwed up when I found it, because I had the bolt locked back to disable the EBB function to give me a slightly higher ROF. That happened almost a year ago and it still works great today. Also it has great range stock with .28 and even .25s. I'd recommend this gun to anybody playing Airsoft in any environment.
This comment is 3 years old. I am considering buying one of these. Would you still recommend?
That is Nice how long is the inner barrell
Nvm just watched it again 519mm
I really want some of that camo he's wearing. What is it called?
Futurefighter49 multi cam
Nice video, congrats from Brasil.
Im considering getting one anything else i need to know?
My friend had one he said he wants his again he would t r ade all his guns for it (he has 7 guns over 200 dollars each)
Ya.. How bout the Mini version that everyone likes, not the hardly known full size one. Mtar is love Mtar is life.
Kett itonic shut the fuck up "not the hardly known full size one" my ass you just know the mtar from fucking cod you know nothing about real guns
one year old comment, and you got Triggered.
Is it safe to put a 11.1v lipo on this right out of the box?
+Dreaklock lipos go in any aeg. however you will get more wear and tear on the gun
PwngeBdaman Is wear and tear easy to fix and/or not ultra expensive? Like say I used a 10.8v (or 11.1v lipo) and got some wear and tear on the gun and took it in to the airsoft shop to have fixed, would that be a reasonable expense, or something that would break the bank?
Dreaklock honestly i would get a mosfet if you were to have that high of a power output in that gearbox. that woud incrrease the longevity of the gun
PwngeBdaman (I
m new to airsoft) how do I do the mosfet? Just take it in to a shop? ANy idea about how much it would cost?
Dreaklock mosfets usually are pretty pricey ($20-100). some you just plug into your battery and tamiya connection, some you have to go into the gearbox and do.
in the review yall should do torture test with the guns you show off
I had problems of mags falling out because my hand would bump the mag release directly behind the pistol grip
is there no airsoft tavors with the rails covering the upper reciever instead of the lousy 5 inch one?
Jacob Carll Evike carries the 6mm Pro Shop extended upper rail as an add-on. As far as I know they don't make one that has it stock.
Good video reviews
That fits my style so will it be in the online store ?
Bintu Beain Yes check the link in the section below the video for more info.
Is this good for cqc
Bintu Beain Yeah, it would be good for cqc. The bullpup design makes it have a fairly compact design in terms of barrel length or overall size in comparison to an M4, M16, SCAR, or most other STANAG based platforms (besides compact rifle designs obviously). You'll have an easy time hitting targets be it turning a corner or nailing a target down a longer hallway. The only thing to really get used to is the magazine location/release and the rather long trigger pull. The velocity by the sounds of it sound fairly cqc safe, most being around 350-400fps.
+Bintu Beain it is you can also get a shorter barrel if that fits your needs
Thanks
were can you buy it in a good price
online
does it use a standard m4 magazine
Excuse me!?? I ordered a m4a1 carbine g&g 340 fps aeg 2 WEEKs AGO!!.. and its still not at me house?! shipping problem!?
Im m4 platform all the way.... its a nice style of gun a friend of mine has this gun.... i just dont like it.... i like to stick with m4 m16 ar15 platforms personal choice.... but from everyone i know that has either shot this or owns it loves it
?
Um... FN F2000? I think thats more modern...
Just buy a real SAR-21 $1750
$299 is expensive for a toy
Prisoner Alex we want to be able to shoot people in a mock battle like fashion.
hes kidding fucking idiot
$2.99 or $299?
I hope your jokeing
I hope it is actually $2.99
$299.99
Fart
Id buy if the real counterpart wasn't used to force people out of there homes