Outstanding Tutorials! I wish I would have found you a couple of years ago!! Best material on the matter to be found on UA-cam! Just great! Thank you very much!
Hey PJ, Absolutely helpful as always. I have a question for you. How do we measure the exact size of the gem we will be using - a caliper? Are there tolerances I need to consider before sending the gem and casted piece to manufacturers?
You are amazing! Thank you for the lessons. One question tho, right there at the end, the small stones are going inside the prong of the head. For printing purposes is that how it`s done? Or you`d have to drag then out a little before the boolean?
Me gustan mucho tus tutoriales son muy faciles de seguir. Solo en este que no puede hacer la union bolena cuando terminas de hacer las 6 uñas para las piedras.
thank you very much PJ. I love your video and the way you instruct. It makes easy for viewer to follow the instructions. The thing I wanted to ask is, I have ready mesh for the diamond and I do not know how to adjust its size. I mean the mesh I have is 1mm and if I want it to be exactly 1.5mm, how can I do it?
Hi Eli, I have a detailed video on my Stone setting online course, Sorry cannot release the video here. but you can try to draw the curve along the engagement ring on top view and use "curve from 2 views" to get it in the ring shape. and use sweep 1 to create the shank.
haha, Hesham, that will be a super looooooong video for different kind of scenarios. I will put on my video creating list for couple scenarios to share. thanks for the comment.
RhinoGold and MatrixGold have this command (gem on curve) because they are Rhino3D plug-in designed specifically for the jewelry industry. Rhino3D itself has been used for all industry. This demo was done in Rhino 3D.
I love your videos. You're explaining everything clearly and without wasting time. 10/10. I find it easy to follow your tutorials.
Awesome, thank you!
thanks sir its very useful for me
Most welcome
Outstanding Tutorials! I wish I would have found you a couple of years ago!! Best material on the matter to be found on UA-cam! Just great! Thank you very much!
Welcome aboard!
very nice i completed this project very nice explanation
Great 👍
thank you. in spite of than I speak only a litle english, I understand perfectly yours tutorials. you explain very good thankyou so much.
Glad to hear that
Hey PJ,
Absolutely helpful as always. I have a question for you. How do we measure the exact size of the gem we will be using - a caliper? Are there tolerances I need to consider before sending the gem and casted piece to manufacturers?
do you want the stone cast in place. there are some limitation on type of stones.
Thanks PJ
you are welcome!
Extremely useful ❤ Thanks
You're welcome 😊
Thank you a lot for you support.
Always welcome
IM working on becoming a CAD Jewelry Designer and your videos are helping more than the classes im in ! hahaha thanks so much nice work !
That is super!
SIEMPRE APRENDO DE TU MAESTRÍA 👍👍
Super!!
Thanks for your sharing, I got to inspire more design ideas from your basic techniques and tools and looking forward to your new videos.
Glad to hear it!
I love your videos ❤
Thank you!!
Very useful video ❤❤❤
Glad you think so!
Thank you PJ
You are welcome.
Great video !
Thanks, John.
Super awesome.Thank you so much!
Glad you liked it!
Thanks so much for creating the videos! Very informative!
You are welcome! Glad you like it Stephen.
You are amazing! Thank you for the lessons.
One question tho, right there at the end, the small stones are going inside the prong of the head. For printing purposes is that how it`s done? Or you`d have to drag then out a little before the boolean?
If you are printing it. you want to make sure all the prongs are not stick to any parts. Best, PJ
Me gustan mucho tus tutoriales son muy faciles de seguir. Solo en este que no puede hacer la union bolena cuando terminas de hacer las 6 uñas para las piedras.
intente mover cada dos puntas hacia fuera 0.01mm y boolean uno por uno. Déjame saber si funciona
Thank you PJ. I learn a lot from you
You are welcome! ^_^
Great video! Thank you so much for all your help. I am looking forward to your next video.
that is great!
Great - I've been waiting for it from since last week - You are the best.
^_^ thank you
thank you very much PJ. I love your video and the way you instruct. It makes easy for viewer to follow the instructions. The thing I wanted to ask is, I have ready mesh for the diamond and I do not know how to adjust its size. I mean the mesh I have is 1mm and if I want it to be exactly 1.5mm, how can I do it?
you can draw two lines, one for 1mm and the other for 1.5mm, use them as a reference to do 3D scale.
If that doesn't make sense to you. email me to pjchendesign@gmail.com
Thank you so much...it worked for me....love your tricks🤗
Pj my favourite learning a lot from these videos.
Thank you Rajath.
@@PJChenJewelryDesign I have sent you message on Instagram... if possible please reply.
Thanks this makes my life a whole lot easier. Thanks again
Awesome!
Thank you!!!
You're welcome!
What a great tutorial ! It's well explained
Thank you
AWESOME!!!
Glad you think so!
Excellent Video.Thank´s
You are welcome!
After the array the prongs on curve barely touch dads, is that what you meant by moving @ end of video?
if the prongs are not in the ideal position. you will need to move it before Boolean Union.
Thank you very very much
you are very very welcome. I am glad you like the video.
Hello Mr about edge of the stone do we have to put into surface of the ring or put it up on surface of the ring ?
If you are referring to the girdle of the stone. girdle should sit on the surface.
i would like to see more this type of video
Stay Tuned!
for diamond holes Boolean difference it becomes boolean union... Please advice
I have several videos discuss why boolean is not working in Q/A playlist. You can check that out.
However, it may be your objects are not solid.
@@PJChenJewelryDesign Thanks... Changed UV direction and it worked
@@shribisht that is great
hi dear pj. i draw this beautiful ring and render it. how can i share it with you and other classmate?
You can have a link post here. I would love to see it!
@@PJChenJewelryDesign with pleasure dear teacher
@@PJChenJewelryDesign hi dear. I send link here but it dose nt share. I will share it in instagram with you
I love your videos, they are so helpful. It would be awesome if you showed how to render using Brazil.
Lisa Waller Hi Lisa, thank you. I use keyshot for my rendering instead of Brazil tho
PJ Chen Design ok thank you 🙏
Hey PJ, can you show how to create a knot? This I would love to know
that is interesting. I will put that on my video making list.
PJ Chen Design fantastic😍
17:24 aaand right at the end the whole thing's messed up.
Just kidding PJ I love your videos ;-)
hahaha! Thank you!
Hi I am trying to make a shadow ring for an engagement ring could you please explain how to do it thank you
Hi Eli, I have a detailed video on my Stone setting online course, Sorry cannot release the video here. but you can try to draw the curve along the engagement ring on top view and use "curve from 2 views" to get it in the ring shape. and use sweep 1 to create the shank.
very well, i apperciate it, keep going, thank you!!!
You are welcome!
good
Thanks
i loved it. extract isocurve ..... thank you
You are welcome!
my fillet edge is not working on prong plzz help me
its showing failure
You may able to find the answer in this video ua-cam.com/video/iWIk4emlqf0/v-deo.html
please make a video how to make a round boll pendant with differet desin
Hi There are so many design out there. is there design that your particular looking for?
شكرا جزيلا نريد ترجمة بالعربية من فضلكم
You are welcome
Отличное видео мне понравилось очень)))
Вы очень рады. Не забудьте проверить остальные видео. Я уверен, что вы им понравитесь.
Я с нетерпением жду ваших новых видео, все классно показываете, вы супер )))))))))
Спасибо. Дайте мне знать, если у вас есть вопросы о Rhino 3D.
Nice pj
thank you
It would be good if you could make for your students some videos about how to fix STL files before printing
haha, Hesham, that will be a super looooooong video for different kind of scenarios. I will put on my video creating list for couple scenarios to share. thanks for the comment.
That's very kind of you, thanks you for your help.
Nice
Amazing! :)
Thank you!
Why don't we use Stone on Curve ?
RhinoGold and MatrixGold have this command (gem on curve) because they are Rhino3D plug-in designed specifically for the jewelry industry. Rhino3D itself has been used for all industry. This demo was done in Rhino 3D.
Great work!
Thank you!
Thank you!!!
You are welcome!