Got an early release of the K8 Procolored Printer! Stay updated on pricing and release dates here: www.kickstarter.com/projects/225456089/procolored-one-click-ink-setup-for-entry-level-dtf-printing?ref=2k5g2u
Thank you. I have been seeing the kickstarter but I will wait a bit and see how this goes. I need the 13 inch one. For what I do at least. Dtf ink is notorious for clogging. Please do a follow up after a few weeks... Let us know how the maintenance is. If it clogs... Also...if I do buy it I would buy through your links if you get a kickback. You absolutely deserve it...because you made this easy to follow.
Thank you! I’d definitely live to have the K13 for sure, for shirt transfers the bigger is really important. I’ll keep you posted on the maintenance but I’ll say so far this past month this one has already been so much better with printing than my older one!
Think there could have been a little more to this video. There is no reason for a part two showing how to use the RIP software (super basic software), sending the print job, use DTF powder, bake, then press.
I'm very interested in seeing what all you can print on other than T shirts...it shows a magnet area, is that something it can print on?? Do you cut it with a plotter afterwards then?
It runs a head cleaning every day on its own, so no! I don’t print every day either. My old printer I had to manually do the head cleaning each day (just a few button clicks on the computer) but this one runs automatically
I'm looking to purchase my first printer, however I do work full time and I do like to go on vacations, so the daily cleaning does worry me. I thought with the auto clean function, I would be in the clear, but I guess not. What would you do if you needed to go on vacation?
You absolutely need to run a daily cleaning but it just needs you to access the computer to press a few buttons. You can swap out the cartridges to put it in “vacation mode” which I’ve done with my other printer but I’ll keep you posted on this specific one!!
Do you think a beginner should start with k8 or just invest in the k13? I am familiar with a profession 14 in dtf printer with my old job. Just not sure I really need the k13. Any advise is appreciated :)
Is the k8 a full 8 inch width. Why is the k13 only 11 inches? Shouldn’t it be 13 inches? I put a deposit for the small one but maybe I’ll reserve the k13 then figure it out. Is the k8 not for shirts? Sorry for all the questions
Looking forward to more updates theres a special going on and its priced at $1399 so 30% off at the moment and i invested, itll be my first time getting into this space and subd to see more and get tips and ideas so thank you
Got an early release of the K8 Procolored Printer! Stay updated on pricing and release dates here: www.kickstarter.com/projects/225456089/procolored-one-click-ink-setup-for-entry-level-dtf-printing?ref=2k5g2u
Thank you. I have been seeing the kickstarter but
I will wait a bit and see how this goes. I need the 13 inch one. For what I do at least.
Dtf ink is notorious for clogging.
Please do a follow up after a few weeks...
Let us know how the maintenance is.
If it clogs...
Also...if I do buy it I would buy through your links if you get a kickback. You absolutely deserve it...because you made this easy to follow.
Thank you! I’d definitely live to have the K13 for sure, for shirt transfers the bigger is really important. I’ll keep you posted on the maintenance but I’ll say so far this past month this one has already been so much better with printing than my older one!
Can you shared one with this printer with applying the DTF powder and dryer/over/ bake however we call that? Thanks
Think there could have been a little more to this video. There is no reason for a part two showing how to use the RIP software (super basic software), sending the print job, use DTF powder, bake, then press.
I'm very interested in seeing what all you can print on other than T shirts...it shows a magnet area, is that something it can print on?? Do you cut it with a plotter afterwards then?
The transfers adhere to fabrics! So yes mostly shirts and sweatshirts but could do bags or other things
@@AlisonCrafts thank you!
Great job thanks
Do you need to do a maintenance every day? I am not printing much and Im looking for a dtf printer that is not a maintenance hassle.
It runs a head cleaning every day on its own, so no! I don’t print every day either. My old printer I had to manually do the head cleaning each day (just a few button clicks on the computer) but this one runs automatically
but can it do tank logos?😉
Hello Alison. New subscriber. Thank you. This was a very helpful video. I am new to DTF printing. Is the software Mac compatible?
Pretty sure it only works with windows...not 100% but I thought I heard no for apple
As far as I know, it’s just for windows!
@@AlisonCrafts oh no! I was planning on ordering this. I only have a mac laptop.
i did the kickstarter before I saw this. Did you get an early release. I thought we had to wait to order this. Also does the oven come with this?
I think this is an ad for them
Yes! You’ll get all the info on the release when they announce, I don’t know when that will be. And yes the oven does come with it!
@AlisonCrafts so glad the oven comes with it!!
@@AlisonCrafts procolored says the oven is an add on when someone asked the question.
So the k8 does 8inches width and what about the length? And what about the k13 what is the width and length of pictures
It can go as long as you want! And the K13 is A3 so 11 inches wide and as long as you want
Does this work with a macbook?
I think it’s PC only
I'm looking to purchase my first printer, however I do work full time and I do like to go on vacations, so the daily cleaning does worry me. I thought with the auto clean function, I would be in the clear, but I guess not. What would you do if you needed to go on vacation?
You absolutely need to run a daily cleaning but it just needs you to access the computer to press a few buttons. You can swap out the cartridges to put it in “vacation mode” which I’ve done with my other printer but I’ll keep you posted on this specific one!!
Curious as to why you never actually showed the printer printing. Is it because it's so much slower than the Kickstarter campaign claims?
No, I did a tutorial on how to print a transfer here: How to Make a DTF Transfer | ProColored K8 Printer
ua-cam.com/video/y6aS3_rhMIA/v-deo.html
Do you think a beginner should start with k8 or just invest in the k13? I am familiar with a profession 14 in dtf printer with my old job. Just not sure I really need the k13. Any advise is appreciated :)
I personally think if you’re able, you should get the bigger size! Especially if you’re planning on doing shirts
Is the k8 a full 8 inch width. Why is the k13 only 11 inches? Shouldn’t it be 13 inches? I put a deposit for the small one but maybe I’ll reserve the k13 then figure it out. Is the k8 not for shirts? Sorry for all the questions
Looking forward to more updates theres a special going on and its priced at $1399 so 30% off at the moment and i invested, itll be my first time getting into this space and subd to see more and get tips and ideas so thank you
Nice ! ❤
impressora dtf A4???
em vale a pena comprar.
Tambien la hay de 13 inches
If only it was 13 inches
Id buy this