How to open jammed rear doors Nissan Xterra Part 1
Вставка
- Опубліковано 18 жов 2024
- I had no idea this would still be helping people after all these years! Yes, a common problem with many Nissan vehicles.
I finally grouped all my videos of figuring out the problem and showing the fix into a PLAYLIST!. Nissan has probably made MILLION$ taking panels off jammed doors and needlessly replacing door locks!
The fix is simple and it's right here! A paper clip, some basic tools, WD40.... no need to involve Nissan or your wallet!
I still have this Xterra in 2019! Making those springs stronger has worked all these years!
• Jemal's Blog: cooperroadmini....
• Request a video to answer your questions: cooperroadmini....
• FaceBook: / cooperroadmini
Dude, I just bought my son a 2007 xterra, Really good shape, low miles, and just yesterday, the back door did this. I'm trying this now. Thanks so much.
Even after 8 years this video still works. Have a 2008 Xterra, that the door just started this. I couldn't get the latch to work from the side sticking. But took off the drumet from the other side, i wasn't going over high enough and then understood what you were saying. It worked when I went back to the original door. Huge thanks for this video. Saved me money for sure.
I'm glad this is still proving useful for fellow Nissan owners after all these years! We still have ours, and one of the doors did stick again a few months back... I had to watch my video to remember how to open it!
Thanks Jemal, your discription of the problem tweeked my mechanical knowledge to use passive vibration as as a weapon against sticky gremlins.
@@glenedwards9846 yes, it was a great idea by another viewer to use a rubber mallet. Much easier than using x-ray vision with my paper clip. It should work to get the lock to release when the problem first occurs.
@@JemalCRM that doesn't work
Worked for my 1999 Nissan Pathfinder! Last night I was looking at some other UA-cam videos and I happened to open this video you posted 9 years ago. I ended up watching all your related videos that explained the solution you used on your Xterra. My driver's side rear door has been locked shut for the last 4 years. It had that exact same floppy exterior door handle that you described in your video. I always figured I'd end up taking it into a body shop for an expensive repair and I never bothered to do it. We just quit using that door as if it didn't exist. My Pathfinder is now 25 years old and it works perfectly except for that darned door! This morning, I immediately attempted your repair trick. I could not see the little part that you described so I just sprayed the crap out of everything I could hit through the little hole in the door handle. I sprayed it with PB Blaster and also Silicone spray. I poked around with a coat hanger rather blindly and nothing happened. Crap! Disappointed, I went back into the house for breakfast and coffee. I came out an hour later because I just wanted to try again. I sprayed it again and poked around with the stiff wire and still nothing. Then I remembered some of the folks used a rubber mallet and hit the door frame to jar it loose. I didn't have one of those so I just started to give it a hard hit with the palm of my hand all around the door frame and door handle. After each hit I would feel the door handle to see if there was any change. After about 10 hits, I felt the door handle and it felt tighter. I held my breath and pulled it and couldn't believe my eyes when the door opened after being locked for 4 years. Now that it was open, I pulled off the interior door panel and I wanted to do your spring repair. Well, it was a surprise for me since the 1999 Pathfinder is totally different from the Xterra in your video. The Pathfinder does not have cables since it has the old school metal rods. I could not find any way possible to get at that little mechanism where you put your spring. At least now I had access to the rods and had my hand jammed all the way up into the door as far as it would go. I hosed everything down with another 1/2 can of silicone spray and moved every rod back and forth while locking/unlocking the door and pulling on the door handle while I sprayed silicone. I never did see anything that I was spraying at since I was just going by feel with my hand inside the door. Finally, I figured that was as good as it was going to get and I would just accept my fate as to whether it will work or not. I then put the door all back together with the inside panel and screws. I stood outside the door with by fingers crossed and locked and unlocked the door several times. It worked properly every time! I have no idea if it is permanently fixed because could never see the root cause of the problem. All I know is that it works today for the first time in 4 years. I had pretty much given up on ever using that door again. Thank you for the inspiration to tackle this repair on my own!
Had the same problem with my Nissen Pathfinder. I used my medium size rubber mallet,gave the outside of the door lock three or four gentle taps to send a vibration through tthe lock and the spring inside the lock did the rest and the door opened. Used WD40 to lubricate locking mechanism. The the rubber mallet did not mess the paint work or leave dents. Do not use a hammer or metel tool. Happy days again!
I did it! I did it! I did it! Thank you Jemal! I'm far from a mechanic - just a mom who can't afford these endless mechanical and shop charges on my 2006 Pathfinder. Door has been stuck for a few weeks now making the backseat useless unless people climb over my daughter's car seat. You video was amazing! I used WD40 and a paper clip (couldn't bend the coat hanger). Not sure I'm ready to brave taking the door panel off and replacing the cables - especially in this cold weather! But maybe a summer adventure! Any tips on replacing my broken fuel gauge- LOL!
Thanks Heather.... I'm so glad this is still helping people all these years! Oh, a failed fuel gauge is most often the sending unit in the fuel tank.... If I recall, there was a re-call on the Xterra sending unit... we ran out of gas before the gauge once about 10 years ago, and Nissan replaced the unit.
oh snap, if you can do it :) then i can
Mine got stuck on a below zero day back in February. I tried many things i saw online short of taking off the door panel with no luck. I tried this the other day and it worked!!! Thank you very much for posting this. One additional thing I did was to spray WD-40 in there before using the coat hanger. After I got the door open I greased up the mechanism with some lithium grease.
Thank you very much for making and sharing this video! I was finally able to get my rear Pathfinder door open today. I tried using a coat hanger and paper clip, but I could not get it to work for me. I drilled out the defective rear door handle. I picked up a replacement rear door handle at the junk yard. Now everything works perfectly!!!
What year Pathfinder? I habe a 1997 with the rear drivers side door not opening
Hey man your video just did with a paper clip is amazing. 2 different mechanics charged me at least $500 each to replace the whole lock assembly. Thank you so much!
Glad it helped! I still have my Xterra after all these years and that same paper clip is in the glove box! Not needed it again as my fix is still.... fixed! That ball point pen spring is still doing the job!
Jemal, thank you for this video. I got it opened after several attempts with a coat hanger. Next step will be to open up panel and modify that spring.
I used a long flat screwdriver to lift the mechanism upward. Worked great, thank you!
Thanks Jemal, I made a similar tool to yours using a spare spoke from a bike wheel. Tried it out on an unstuck door first so I could pop the plug and have a look for where I needed to place the hook on the tool. Got the stuck door open within a couple of minutes. Hopefully a trip to the auto parts store to get some penetrating lubricant will be the end of this annoyance.
You sir are a Prince among Men!! Thank you so so so much for this, and thanks YT for allowing a format for this info. Lifesaver
Thanks very much! I'm amazed how many people have been helped! It's been more than 10 years and I still have my Xterra and and the ball point pen spring is still doing the job!!
Used it today and worked perfect! I had to open the other side rubber gromet to see better what was going on and practice with the good door. Thanks much!
Thank you! I just bought a 2007 pathfinder with a rear driver door that would not open. Followed your instructions and the problem is fixed.
I have a 1997 Pathfinder, but this solution didn't work. It seems like a different mechanism. Can you explain how you made it work? Thanks.
THANK YOU SO MUCH it’s been closed for over a month and i’ve been super bummed by it thank you thank you thank you!
THANK YOU for making this video, mine started to stick this on my '09 end of winter. Made the tool from an old coat hanger.
Thank you! I just got mine unstuck after 3 weeks. All for the cost of a large binder clip that was starting to rust in the garage anyway. Much appreciated.
I might add that I used Liquid Wrench RV Dry Lubricant after I used your trick tool to get the door open and removed the door panel. I lubed both the lock actuator knob and the area behind the circular rubber. I'm hoping the dry lube won't attract dirt. Thanks again for your info!!
I tried the wire trick and wasn't sure exactly what part to fiddle with .. sprayed some penetration fluid around area .. waited...sprayed some more while trying to activate lock switch..after a little bit it worked!!! Been stuck for 9 months!!!
Ok, I just did this and it worked perfect. After I pulled the rubber grommets off the door I then sprayed some wd 40 and loosened it up. Thanks again.l
Thank you for this. Very resourceful of you. 👍 my 2007 has this problem.
I don't have this prob but might be buying one so looking at vids.
Very professional video. Thumbs up.
Jemal... thank you so much for this. Did it with a coat hanger.
As for the fix, good old fashion WD40 for me. The area between the surface and the "return switch" was a bit gummy so the lubricant fixed the "weak return". I was able to spray it from the view hole.
I wanted to provide some better action pics but it is very hard to get a flash and a camera in the hole together.
Thanks again. It's pretty frustraing when you can't open a door, even from the inside.
Here it is! You are a saint, sir!
I put half a dozen videos up in a playlist on my channel... as I figured out the problem and the fix:
ua-cam.com/play/PLf9CYi_IUYZnRS5yAPPal0MDj46UaDUhP.html
Great work showing what is wrong. You helped me with my problem. got it working. Thanks!
Does this work if the inside handle doesn't work as well? Gonna try to find a nice heavy duty paperclip like that to give this a try today.
Had to practice on other side with the plugs removed but your trick worked!
Glad it helped!
Should I hook the paper clip onto the mechanism and pull towards the rear of the vehicle? Or try to push the mechanism forward with the paper clip toward the front of the vehicle? Thanks.
We are having this exact same problem with the exact same rear driver's side door on our 2015 Xterra Pro-4x. Will have to try this.
Yup, sooner or later the return spring can't return! It's a simple and cheap fix if you watch the other videos in the playlist...
In most cases the outside handle gets dirt build up that causes the handle return spring to bind. That binding will put the mechanism in the halfway point where neither handle will work. If you gently use the inside handle to snap back (opening the handle all the way and letting it loose) it will work the outside handle spring. Once the spring works back you will be able to open the door from the outside if the handle isn't broken.
The tell tale sign that the outside handle is going to lock up is the handle starts to flop around. When the return spring is fully loose the handles will shut tight.
Remedy......
When the handle start to get loose this is an indication that the return spring is binding.....You should spray WD40 on the mechanism through the little holes on the door where you access the nuts that hold the handle on the door. As you spray WD40 snap the outside handle and you will see it tighten up.
im trying fromthe outside with a hanger, having a hard time though any tips?
This is so true I have the exact same truck and my door gets stuck from time to time
My doors been stuck for a month!!!! Thank you
My 07 x just started doing this today.... I'll try. This this weekend.
This was a reply to a viewer who just couldn't do the trick (and it really isn't an easy thing to do!) I hope it helps as another thing to try.... Over the years MANY Nissan vehicles have had this problem. If lawyers could follow my procedure, we might have had recalls by now! Has anyone ever been trapped inside? The door won't open from the inside either when the lock jams with this problem!!
I'm actually surprised by how many do manage to do it! You really need a keen mechanical sense to almost have x-ray vision to snag the little tab to help retract the sticky cable! Even the sentence is almost impossible to follow!
The best advice was from another viewer... Blast WD40 thru the opening (where I put the paperclip!) to try to hit that cable, then gently tap with a rubber mallet (or your knuckle like knocking on a door) around the area of the door handle and gently work the lock manually (by repeatedly trying to unlock it using the MANUAL knob on the inside of the door, by reaching around thru the front door) until it releases. DO NOT try the door handle!!! Every time you do that, you must start over trying to retract that cable that PREVENTS the door from unlocking. It is as though someone is holding the door handle in the open position as you are trying to unlock it.
If you do get it open, I suggest you disconnect the door from the central locking control until you can fix the problem (by removing the door panel as I show in another video and unplugging the power lock). Otherwise the door will jam every time it is locked and someone operates the handle.... goes to open the door.
Great video ! But i have this problem with my front door sadly
Faaakkkk thaaanks Brow!
Really thanx 💯💯💯
Happened to my 2005 xterra drivers side front door lol let’s hope this works
Awesome trick, many thanks!
My 05, rear driver door won't open from the inside-- outside works fine, inside won't budge.
Saving this video just in case. 😅
Hey you girl! Are you sure your child-lock feature didn't get activated? I made another video explaining that. Designed to keep kids - and quite a few adults - from opening the back door while you're driving!
If so, don't feel bad, and all you do is flick a little switch to "fix" it!
It worked! Thank you for the help, awesome video! :D
Hi jjenny :)) .where you from?
💪💪
Thanks much Jemal, it work perfectly!!!
My door panel is pushed in so that the door will not open and its not letting the door be opened when I try to open the door help
My 2004 Nissan Xterra REAR HATCH (not rear doors) got jammed shut. The Manuel key would no longer lock or unlock the REAR HATCH with the key in the key hole on the rear hatch. I FIGURED OUT if I lock the door using my key on the drivers side door, in the key hole and gently turn it TWICE it will lock ALL DOORS INCLUDING the REAR HATCH. And does the SAME to unlock all doors when gently turning it TWICE the opposite way - it unlocks ALL DOORS including the REAR HATCH. It (the rear hatch) won’t lock or unlock with the key in the rear hatch key hole BUT I can now open it with the double action TURN using the driver side key hole with the key.
Wouldn't it be easier to remove the grommet (i.e., the one that you show very clearly at 1:53) that goes over the circular hole from the inside of the car?
Nevermind. I realize now the door first needs to be opened to get to the grommet!
I'm having trouble is there any other information you can give to help get this door opened? I just can't catch it with the coat hanger.
Got it fixed!!!
Trying this on a 2004 Nissan Xterra? No luck so far. Any suggestions?
Another person said tapping around the outside door handle with a rubber mallet helped retract the sticky cable that prevents the door from unlocking. Makes sense!
Hello I did everything you did ... and it worked for me now the problem is that I changed the handle And it only opened inside and by mistake I put the Child safety and I cannot open it inside or outside .. I hope you help me .....
The child safety lock disables the inside handle, so the door will only open from outside. If yours won't, it seems like you have the original problem... the release cable is not retracting, thus the lock won't release.
Will this work for a 2000 Nissan Pathfinder LE door
I can't say for sure but it seems the design would be similar. Try the WD40 and rubber mallet trick I explain below as you manually click the lock back and fourth to see if that cable will retract. And DON'T try the door handle until you feel the lock click to the open position. Then don't the lock the door again!
Mine did the same thing, the back drivers door wont open, but i noticed it will open from the inside of the car, you can also try the inside latch.
thank you ! it worked for me!
It work for me but then I somehow made the cable too tight and can't do it again any idea on how to adjust that.?
It's only a temporary solution to get the door open so you can get to it to fix it! I disconnect the power locks so the door does not lock until you can fix it! Do NOT operate the outside door handle! Try again after a day or two of driving.... the vibration will help retract the cable to make it easier as long as you do not touch the outside handle!
Saved my butt.
OMG!!! I will try this I was so beside myself 😳
You the man 🙌
my husband took off door panel and took out the rear door actuator. He believes this is the problem for the door not opening. How can we tell which one is the problem. He can unlock door from the inside but not the outside.
I just sprayed the same hole the paperclip went in with wd40!
Did it work with just wd40?
I can't open my rear door from the out side or inside but my car is Nissan titan ,any idea what I need to do ?
HI Tony, Sorry missed my notification of your question... While I have no experience with the Titan, I have to think Nissan uses similar designs across models. What happens is that the cable that is worked by the door handle gets "lazy" and does not return all the way when you let go of it. This causes the locked door to NOT unlock (as though someone was holding the door handle in the "open" position as you try to unlock). You must find a way to reach in to that cable and retract it to allow the door to unlock.
Sometimes you can help by repeatedly "snapping" the door handle, or working the lock from inside the door by hand- NOT with the electric switch. If you get it open this way, DON'T lock that door again until you can pull the mechanism out and lube it, or make the spring stronger like I show... Or it WILL seize up again!
I'm AMAZED that after all these years Nissan acts so clueless about this, and charges HUNDREDS in labor and changes out all kinds of door guts to "fix" it!!
Will this work if you lock your keys in the car ?
Well, no! Unfortunately(?) this is not for breaking into the car! I should think it would be a bigger problem for Nissan if it was! Try prying the entire door from the top corner enough to poke a coat hanger(!) in to the unlock button!
happened to my two backdoors so what I did was took a rubber molly and tap it around the area and then right on the handle on top of the inside of handle and it worked it popped open doors I unlock the two doors and then I took out those two little rubber cap inside the doors and spray the inside with wd40 you could see the mechanism …...
Very good idea with the runner mallet! I bet that will work for lots of people to get it to open!
Thank you very much
I can't find the latch. I've used a paper clip and a scaler. This is the 3rd or 4th time my driver's side back door has done this and I'm sick of taking it in. The child lock is on, so I can't even open it from the inside. I've felt all up inside with the paper clip and I can't find the freaking latch. There's nothing to grab.
Does it work on pathfinders also??
Yes. Late reply i know.
But this is basically a pathfinder. It is called something else overseas. But yeah works for the pathfinder
Thank youuuuuu!!!
I'm fixing to do this too. Mine is stuck and has been for about a week. It's enraging lol
thank you ☺
My door won't open at all from inside or out. Trying with hanger. No success yet
Show us how to open it when locked with key stuck inside the car ?
Ha, that it quite a different matter! Most call their roadside assistance (tow truck). If the car is yours, he'll use something to pry the door open at a corner, just enough to poke something through and trip the un-lock button.
Does this work for 2002
I've heard the Altima sedan uses similar door mechanism, and the pathfinder.... so seems common to Nissan, BUT I don;t know for certain, or if a similar technique can be used to open the Gen 1 Xterra doors.
Ok, so I’ve tried this. The issue of mine is that the child safety latch is on AND the door is jammed so no matter what I try to do it will not open
thanks a lot !!!!
anyone tried this on a Pathfinder
Iyke Gbench figure it out?
Figure what out? The pathfinder does not have the same rubber that can be lifted up and a wire inserted, it has a hard plastic that does not lift up, if you are so smart why don't you figure it out and show how it is done.
well i was having this problem, thanks anyways man
@@iykist hi I have a 1997 Pathfinder I just got for work. My driver's side rear door was seized they could not figure it out. I sprayed a penetrating oil into the lock waited maybe 10-15 minutes tried the outside lock a couple times and it opened right up. dealership wanted to break and tear apart my inside door panel.
I have an 08 pathfinder and this has happened to 3 doors all at once😒
Yeeeeah.....i see you're doing it...just can't be done . lol
I'm actually surprised by how many do manage to do it! You really need a keen mechanical sense to almost have x-ray vision to snag the little tab to help retract the sticky cable! Even the sentence is almost impossible to follow!
The best advice was from another viewer... Blast WD40 thru the opening (where I put the paperclip!) to try to hit that cable, then gently tap with rubber mallet around the area of the door handle and gently work the lock manually (by repeatedly trying to unlock it using the MANUAL knob on the inside of the door, by reaching around thru the front door) until it releases. Do NOT try the door handle!!! Every time you do that, you must start over trying to retract that cable that PREVENTS the door from unlocking. It is as though someone is holding the door handle in the open position as you are trying to unlock it.
If you do get it open, I suggest you disconnect the door from the central locking control until you can fix the problem (by removing the door panel as I show in another video and unplugging the power lock). Otherwise the door will jam every time it is locked and someone operates the handle.... goes to open the door.
My 06 Pathfinder now doing this...
mine just did as well.. did this work?
im about to try right now
@@jasonmanigo193 I actually ended up having to buy a new battery and once I installed the new battery the door locks worked no problem. Not sure why though.
@@paradiswest4395lucky you lol
son of a b*#ch this worked !!! thank you very much
Didn’t work for me but WD40 did and now it’s like brand new
I am going to get my husband to TRY this...or I will...
fricking awsome
I can’t I need help
You have to have better ccontrol of your video too much movement got me dizzy
Yes you're right! This was almost 10 years ago, and I have gotten a bit better!
Didn’t work…0
Doesn't work
Way to go dummy! You just showed a bunch a crooks how to break in people's vehicles!!!
Ha Ha Haaa... I'm afraid you're the dummy! It does not work to "break in"... and I mentioned that, but some folks just don't listen or understand! All you're doing is retracting the cable to allow the door to unlock in the normal manner.
Does that work in nissan terrano regulus?
Thank you very much
son of a b*#ch this worked !!! thank you very much
Thank you very much
Thank you very much