My brother is kind of a tech wizard of sorts. Had this issue when I went to show my family my device after it sat for months of not using, stuck on the boot screen like this. He essentially wiped the original SD clean and reflashed it with Anbernics dual boot system they have on their website for a firmware update and it solved my problem. Definitely would recommend doing that
Hold power and reset simulataniously for 5 secs. If this still does not work. Disconnect the battery to discharge for a few mins. reconnect and then attempt to power on again.
I have the same problem also ordered from China. the console works but nothing is displayed, I tried to reinstall the software and still nothing. Tomorrow I will try to connect it to the HD cable to find out if it is definitely a display problem. in my case, I am not able to return it because the link to the return label does not work. I have been trying to contact the seller for several days and have not received a response. you can try what I plan to do is to order a new display but it costs about 20 euros
Open the back where the battery goes. I dont know why they ship them like this but for one its not connected and the most important thing is they covered the end part with like paper so you need to remove it before pluging in the cable. That should resolve your issue
@@julioarguello3263 how did you fix yours? I contacted them and they told me to download the software but idk if it's because I have a Mac but it doesn't even let me download that either.
Corrupted cheap sd card. You need to flash the software image to a quality sd card. It is common for this to happen. It's easy to fix if you use youtube and have a pc
RG35XX is working but you just didn't change these trash SD Card. Use Sandisk or Samsung 64Go/128Go, reinstall StockOS (or other) and Roms and go for a speed start up
@@gagcagg get an SD card reader and there are a lot of videos about how to reinstall the operation system to the device get 2 SD cards 1 for the op system 1 for the games it will work! I did it and i had zero problem with my device
@@gagcagg ua-cam.com/video/jw98BVGPWUg/v-deo.htmlsi=A6-Jrgdxfp8ebNcP it will help! It looks hard but i can trust you this is very easy if you follow the steps :D
The micro sd card probably failed. The ones they send are cheap. Definitely get a better brand and make a copy of the files to your pc I made a YT video on 3 ways to recover the original anbernic software if anyone is having problems
@@Kreonkreonyou gotta put the formatted sd card into the system first then it’s supposed to install the emulators from the device then place it in the computer and transfer files. Give that a shot and see if it helps
You have to perform the update on your computer and the problem is fixed there, the same thing happened to me and I followed the steps on the official website
Open the back where the battery goes. I dont know why they ship them like this but for one its not connected and the most important thing is they covered the end part with like paper so you need to remove it before pluging in the cable. That should resolve your issue
I bought the new version 2024 Rg35xx Plus and incorrectly formatted the included SD card because of a video on UA-cam, now I can't even turn it on 😢can someone help?
E aí mano, conseguiu resolver? Comprei um rg35xx h, fui fazer o backup dos arquivos dele e quando coloquei o cartão no console ele não ligou mais, quando coloco no carregador ele acende o led laranja, mas não liga de forma alguma.
Tried all that. Even bought new SD cards and formatted them to FAT32. There seems to be some issues with Anbernic RG35XX's bought in 2024. I'm having the same issues with GarlicOS.
@@auburnbluephotography9043 try something easy then like minui just drag and drop files on root of SD card. Insert in device after that see if it works it's really that easy with that os. If that works and you like it I can steer you into direction of more emulators for that os. Or just get finui
Open the back where the battery goes. I dont know why they ship them like this but for one its not connected and the most important thing is they covered the end part with like paper so you need to remove it before pluging in the cable. That should resolve your issue
Open the back where the battery goes. I dont know why they ship them like this but for one its not connected and the most important thing is they covered the end part with like paper so you need to remove it before pluging in the cable. That should resolve your issue
Mine did the same. Replaced the TF1 micro sd with flashed garlic OS, works perfectly again.
My brother is kind of a tech wizard of sorts. Had this issue when I went to show my family my device after it sat for months of not using, stuck on the boot screen like this. He essentially wiped the original SD clean and reflashed it with Anbernics dual boot system they have on their website for a firmware update and it solved my problem. Definitely would recommend doing that
Could you please ask him how he did it if he remembers
I have tried, but still no changes. Do you mind to share the steps?
saaaame. More like 3 years for me but same issue not yet fixed can’t get through my sandisk ultra simcard
The OG SD cards are known to fail. get a new card and set it up via youtube
Hold power and reset simulataniously for 5 secs. If this still does not work. Disconnect the battery to discharge for a few mins. reconnect and then attempt to power on again.
Damn thanks it works
Bro... I love you 😂 it worked
Nice thank you 🎉 worked for me
It worked for me once 😅 now that doesn't work either ffs
Let me try this
Update. Didn't work.. just have to replace the card I guess. I think this works with the stock o.s but not with garlic o.s
I have the same problem also ordered from China. the console works but nothing is displayed, I tried to reinstall the software and still nothing. Tomorrow I will try to connect it to the HD cable to find out if it is definitely a display problem. in my case, I am not able to return it because the link to the return label does not work. I have been trying to contact the seller for several days and have not received a response. you can try what I plan to do is to order a new display but it costs about 20 euros
Take the Sd card out, jiggle it a bit as you put it in, helps with mine when this happens, i think its just a bad batch of sd card readers
I got the same issue, mine was the battery, I couldn’t fix it so I just tossed it and got a Rg35XX+ and never looked back.
I got the same issue with the plus one :((((
Brother, o meu estava assim e abri ele e tirei o conector da bateria, aguardei por alguns minutos e liguei novamente. Resolveu esse problema 👍🏻
Certeza?
Mine is working fine and played a few games on it 👍💪😎💨😁🎉
I have the same issue.
I know how to fix it
Open the back where the battery goes. I dont know why they ship them like this but for one its not connected and the most important thing is they covered the end part with like paper so you need to remove it before pluging in the cable. That should resolve your issue
But it might be different for you your issue. For me it wouldnt stay on and then I found a video it showing how to fix it and it worked
@@julioarguello3263what’s the video to fix
@@julioarguello3263 how did you fix yours? I contacted them and they told me to download the software but idk if it's because I have a Mac but it doesn't even let me download that either.
Corrupted cheap sd card. You need to flash the software image to a quality sd card. It is common for this to happen. It's easy to fix if you use youtube and have a pc
Can you copy the ROMS on the stock SD card to a new SD card or would they be corrupt too?
@Zebrashark777 if the roms are corrupted files, it's easy enough to find them using Google
@Zebrashark777 no but you can dl roms easily
I tried Putting Batora on it and now the SD Card isn’t working. I think I might have inserted it the wrong way and got it Corrupted
RG35XX is working but you just didn't change these trash SD Card. Use Sandisk or Samsung 64Go/128Go, reinstall StockOS (or other) and Roms and go for a speed start up
I’ve fixed this
Now I’m contemplating whether to get this or not. Should I get this or the r36s
Did you get any yet? I have Both i recommend r36s, anbernic has better Buttons and shit But the tech is trash
I ended up getting nothing lol
same issue, the console turns on but the operating system freezes, how did you solve it?
Have you solved yours?
Suposedly by holding power and reset buttons for 5 seconds... I think that could fix it
My card just started acting up last week. Thinking of replacing the card
My sd card is working and its the 64 Microw the old one
Idk what i did but mine is stuck on personalized system fast settings and i tried everything and it keeps going back to that screen
Mine works, but it doesn't light up when I have it plugged in. I got it half an hour ago. It was at 10% now it's at 7% while still plugged in.
Depois que eu resetei o meu, não liga mais e nem a luz acende.
Você vende?
Lol one lil drop from mines and the screen went completely black
Hold the power and reset simultaneously to fix this.
Thx bro!! 👌
How long?
İ did it didnt work
@@gagcagg get an SD card reader and there are a lot of videos about how to reinstall the operation system to the device get 2 SD cards 1 for the op system 1 for the games it will work! I did it and i had zero problem with my device
@@gagcagg ua-cam.com/video/jw98BVGPWUg/v-deo.htmlsi=A6-Jrgdxfp8ebNcP it will help! It looks hard but i can trust you this is very easy if you follow the steps :D
The micro sd card probably failed. The ones they send are cheap. Definitely get a better brand and make a copy of the files to your pc
I made a YT video on 3 ways to recover the original anbernic software if anyone is having problems
I dragged all the files to my pc, then dragged them to a new San disk sd card with more storage and now it won’t even turn on with this one
@@Kreonkreon sorry to hear that. Thats really weird. Did you format the new card to the right format first. Fatex or whatever it’s called
@@saiyan_princestudios9790 I format it on my computer idk if I did to that exact thing
@@Kreonkreonyou gotta put the formatted sd card into the system first then it’s supposed to install the emulators from the device then place it in the computer and transfer files.
Give that a shot and see if it helps
Os in the sd Is corruted and also the OG sd card would be damaged.cause to turn off incorrectly the console
Did you remove SD card before this problem appeared?
yeah
You have to perform the update on your computer and the problem is fixed there, the same thing happened to me and I followed the steps on the official website
Hi, Yesterday had the same problem. Is there any video or tutorial of how to fix this? thank you.
same issue
I know how to fix it
Open the back where the battery goes. I dont know why they ship them like this but for one its not connected and the most important thing is they covered the end part with like paper so you need to remove it before pluging in the cable. That should resolve your issue
Take the sd card out and then put it in press restart and then power on for 4 second
doesnt work for me
switch out the sd card for a new good one
I bought the new version 2024 Rg35xx Plus and incorrectly formatted the included SD card because of a video on UA-cam, now I can't even turn it on 😢can someone help?
E aí mano, conseguiu resolver? Comprei um rg35xx h, fui fazer o backup dos arquivos dele e quando coloquei o cartão no console ele não ligou mais, quando coloco no carregador ele acende o led laranja, mas não liga de forma alguma.
@@toinmatadordeporco495 resolveu... trocou o cartão pra ver se fica normal?
My xxH stopped workin today anbernic needs to stop scammin ppl
They’re not just get rid of that trash first card and flash it onto a Sandisk
It works you just messed up your SD card reformat the card fat 32 and reflash os
Tried all that. Even bought new SD cards and formatted them to FAT32. There seems to be some issues with Anbernic RG35XX's bought in 2024. I'm having the same issues with GarlicOS.
@@auburnbluephotography9043 try something easy then like minui just drag and drop files on root of SD card. Insert in device after that see if it works it's really that easy with that os. If that works and you like it I can steer you into direction of more emulators for that os. Or just get finui
@@auburnbluephotography9043 also it does this when battery is dead
hey did you figure this out? I got the exact same issue
SAME HERE!!! CAN SOMEONE FIX THIS ISSUE?
Open the back where the battery goes. I dont know why they ship them like this but for one its not connected and the most important thing is they covered the end part with like paper so you need to remove it before pluging in the cable. That should resolve your issue
But it might be different for you your issue. For me it wouldnt stay on and then I found a video it showing how to fix it and it worked
Can you post here the video that helped you fix it or does it have the same process you commented?
Solo hay que sacar las targetas sd y todo bien
I have exactly the same issue.. did you fixed it?
Disconnecting battery mean open back and take the battery out right?
Is there an ad card in it?
I did a video on how to fix this.
i have the same issue i have to press reset few times to get it started after 3 min try
What did you do
Just prease the r button
Same problem :((
Reinstall os. Simple fix
How
@@user-fz7rc4bm9cformat and reinstall
How do I fix it
I got the same problem
Same as mine. How do you fix it?
Change sd
SD card
Not work recording new soft
Same
Easy fix
Change the sd card slot
tried that and still not working
Sd
I have the same issue it wont turn on i tried everything but when i conncted in my pc it recognize the device but still with black screen
Is it at full charge and try changing the sd card slot if that doesn't work I would contact anbernic
How to fix like that issue not working
Try open console, disconnected power cable between 5-10 min and assembl. Good luck
How do you fix it
Just say these things are trash
Same
We all have the same issue but I know how to fix it
@@julioarguello3263 well you're supposed to share 😂
Open the back where the battery goes. I dont know why they ship them like this but for one its not connected and the most important thing is they covered the end part with like paper so you need to remove it before pluging in the cable. That should resolve your issue
But it might be different for you your issue. For me it wouldnt stay on and then I found a video it showing how to fix it and it worked