Another BMW Project 08 (Rear, E61 Umnitza bumper installed!)
Вставка
- Опубліковано 30 чер 2020
- Took me a while but I finally got a full M look on my wagon! Happy with how it turned out!
Project playlist:
• Another BMW Project
Parts I had to buy for this conversion:
Here is the list of parts that need to be bought for the rear bumper conversion:
M style rear bumper: 51127897267
Mount, bumper rear left 51127897195
Mount, bumper rear right 51127897196
Guide, Battery Cover 51127896619
PDCs: 66206989102 (bought 8 for from and rear)
PDC connectors (bought 8 for from and rear) - search for 3 wire PDC connector for E39/E60 Ford F150
#anotherbmwproject, #bmw, #elitebimmers - Авто та транспорт
I ordered everything for my e61. Talk about expensive! The only reason why I decided to do it is because I want to go dual exhaust in the future. My e61 is a keeper!
Looks amazing! And nice touch with explaining the whole removal process 👌
Thank you!
Very good and helpful Video 👍
THANK YOU from Germany
Looks great!!!!
Thank you!
Nice job:)
Thank you!
Looks great! A couple of years ago I was rear ended and got a new bumper on the CTS wagon. Now I have light scratches on both sides, one is my fault the other my ex-wife. Perhaps someday I will get some paint work done. Priority right now is removing and replacing torn driver seat cover. I have used driver and passenger leather just need to get off my ass and DO IT. Keep up the good work.
Thank you!
Dang, I have an E91 touring and I'm planning on installing an M sport rear bumper and an M3 front bumper on it from this same company. Looks great on your 5 series! I was looking at an E61 535i before deciding on the 3 series.
Thank you for your comment! E91 touring is also a beautiful wagon. Especially if you convert it into an M look.
Nice job , I have a M packaged e61 and they sure look better with a roof rack delete
I want to delete roof rack on my project as well.
hi there what's the part number for the centre piece that bolts to the spare wheel well please ?
How did you make the adjustments? Installed mine and have the same piping out issue by the tail light. Also are the rear wheel arches need to be changed to m sport like the front? On the website real oem it shows regular and m sport are same part. Not the bumper holes don’t line up with the regular wheel liner. One hole is off. Can you confirm please. Thank you
What did you end up doing with the cover for the air compressor on the passenger side?
Did you trim it or get an M cover ?
Hello, I am about to order an M style one. At this moment I don’t use this car.
You didn't say or show anything about the thing standing in the middle behind the bumper but i see it different on the video. Isnt it?
Nice wagon,congrats...
The rear sensors are diferent from one bumper to another?I'm doing the same upgrade already have the bumper and difuser,i try to swap the sensors and they Just go half way,are the m sensors bigger?
Nice work great video...
Thank you for your comment!
PDC sensors are different on M style bumpers. They are way bigger than on regular non M style. This is the part number 66206989102 I used.
Also you would need a plug for these, I used couple of these: www.ebay.com/itm/312808696652
they worked ok, just had to figure out the wiring.
@@EliteBimmers thanks for your help
Is this bumper from umbitza?
where did you get the side skirts also from same seller 'Umnitza'?
Side skirts are from original M5 parts, from E60 M5.
What size rims are you wearing and are your suspension stocked?
My car is on ISC Coilovers. The rear pneumatic suspension was deleted. The wheels sizes are 225/35/19 front and 255/30/19 rear.
Looking very good, what wheel are those?
These are Vossen cvt 19".
EliteBimmers thank you
Is the guide battery cover necessary for e60 se conversion to msport bumper conversion??
Yes, it is a good thing to have it. It helps securing the bumper. The one Umnitza sells already comes with one.
@@EliteBimmers Dyu know if perhaps if I can diy the se rear bumper brackets and make the bottom bit slightly longer that could perhaps work instead of me purchasing the msport rear brackets?
I think it’s possible, I didn’t consider that because I had one, maybe trimming the old one could work? Just guessing… I remember the M sport one is an oddly shaped part, been a couple of years since I have done it.
Hi there,
I have a 2007 530xi non M and I purchased an m tech rear package. Do you know if I would need the rear bumper brackets?
Thank you,
Hello, yes, you would need to get these:
www.ebay.com/itm/BMW-5-E61-M-Sport-Rear-Right-Bumper-Bracket-OEM-7897196-10-51127897196-10-/275254508411?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Left and Right sides. Non M will not work.
Sorry for the late response
@@EliteBimmers thank you! Are you on instagram?
@@PieroAlon7 yes, but due to the construction of our house haven’t posted in a while, @elitebimmers
What type of diffuser is that and what rear bumper did u have with it?
I'm not sure how exactly it's called. But it came with the bumper.
EliteBimmers u gotta link for it?
@@dahero6216 Here is the link for the whole assembly: www.umnitza.com/browse-by-car-model/bmw/5-series/e60/e60-5-series-mtech-polypropylene-touring-wagon-rear-bumper.html you can email the owner of this company and ask him if they will sell you the diffuser separately: info@umnitza.com his name is Matt.
how do you like this bumpers fitment and durability??
Fitment is ok. I had to modify carriers in the taillights area to get better fitment, but it’s not a big deal.
Durability is good so far. I know several 5series.net owners got these a few years ago and I haven’t seen any complaints.
I would try to get a real OEM E61 bumper but it’s almost impossible to find it.
I watched the first 40 seconds a few times and can't tell WHO the painter is. I see there's a prepainted option on the website but I wanted to make sure that's who did it vs someone local here in WA.
Mine was painted in WA. I think Umnitza charges $140-150 per bumper to paint it.
@@EliteBimmers Yeah, where'd you get it painted and how much?
He is located in Longview, WA. He charged me around $300 for paint and PDC installation. I can share his number via private message, don’t want to display someone’s number on the internet.
@@EliteBimmers Damn, I'm just north of Seattle up in Marysville...yeah, thanks but I'll pass. I was hoping you were on the Eastside in Bellevue or something. I'm sure I can find someone more local.
No problem sir!
What wheel and specs are you running
My wheels are Vossen CVT, 19” current tires are Michelin Pilot Sport 4s, 225/35/19 front, and 255/30/19 rear. Also, I have wheel spacers, but remember their sizes off my head.
What kind of rims you have? Oz?
Vossen CVT. 19”.
@@EliteBimmers Thanks
Would I need the same separate bumper mounts for a e60 535xi??
Hello, I honestly don’t know about e60. What I learned is that M-style package bumpers are a little bit narrower than regular ones. I guess that they are using different mounting parts for both sedans and wagons.
@@EliteBimmers alright thanks for your response
@@EliteBimmers installing m5 sideskirts n extensions & Malory bumper this weekend
did u need new mounts i hav new bumper too seems to be normal mounts are 3cm too short
@@chikomerino2534
Здоровья вам на русском языке перевод или видео как можно смотреть
Ваше видео