Fluke 87V Lead Error & Repair

Поділитися
Вставка
  • Опубліковано 29 жов 2024
  • The lead failure due to moisture and its solution by replacing the connector.

КОМЕНТАРІ • 17

  • @cryptiksouls
    @cryptiksouls 2 роки тому +1

    Update to previous comment. I had this error and called Fluke. Didn't realise these meters have a 10 year warranty. Mine was 9 years 11 months old, I had no receipt or anything, just gave them the serial number. I sent it back and today have just received a brand new unit from Fluke. Check your warranty guys!

  • @alfredocruz6856
    @alfredocruz6856 4 дні тому

    i had the same problem.. I just removed the fuse connected to that micro amp terminal since i dont use that function.. i've tried cleaning with cotton swab repeatedly but did not work.. problem solved

    • @caliskanali
      @caliskanali  4 дні тому

      @@alfredocruz6856 Since there is a special structure inside the connector, cleaning it does not solve the problem. Installing a new connector provides a solution.

  • @bukanpasukannasibungkus4866
    @bukanpasukannasibungkus4866 2 роки тому +1

    Try clean the hole lead socket using cotton bud. Its works!!!

  • @JohnUsp
    @JohnUsp 2 роки тому

    Hi Ali, my Fluke 189 is warning LEADS on all scales, but "A", I already removed the input jacks and cleaning, but still showing this warning. When I heat it, the warning stops, but return when cold. Any idea?

    • @darrenroydelaminez1008
      @darrenroydelaminez1008 Рік тому

      The same issue

    • @JohnUsp
      @JohnUsp Рік тому

      ​@@darrenroydelaminez1008 I immersed my Fluke 189 board in 99% isopropyl alcohol for 1 month (first I removed the display), the alcohol removed all humidity inside the board, and it has been working perfectly since then.

    • @darrenroydelaminez1008
      @darrenroydelaminez1008 Рік тому

      Great idea my friend. Thank you for sharing

    • @francescocosoleto
      @francescocosoleto Рік тому

      @@JohnUsp"for 1 month" ?

    • @JohnUsp
      @JohnUsp Рік тому

      @@francescocosoleto I let it on alcohol for 1 month because I was busy, but maybe could be less, like 3 days. after that, I dried it on the fan and put it in an oven at 180 F for 20 min, is working linke new. REMOVE the LCD Display before (and, of course, I'm talking about the board)

  • @matlesterdivinagracia6528
    @matlesterdivinagracia6528 3 роки тому

    where did you that probe socket?

  • @threeei9892
    @threeei9892 2 роки тому +1

    El mío dice error f8 please ayuda

  • @tienanhhoang6453
    @tienanhhoang6453 3 роки тому

    Hello. Pls help me.
    How to buy this item.

    • @caliskanali
      @caliskanali  3 роки тому

      Hi, I bought it from Fluke's technical service.

    • @tienanhhoang6453
      @tienanhhoang6453 3 роки тому

      @@caliskanali I cannot find them in the accessory list. Give me a link about them. Thank So much

  • @aldinandigodinez9740
    @aldinandigodinez9740 3 роки тому +3

    You didnt tell whats the problem. You jump right in action without telling us what you are doing.

  • @shaunmorrissey7313
    @shaunmorrissey7313 3 роки тому

    Your video editing is equal to over strained autotune