Do you sell the design for your drilling machine. I live in Texas, United States of America. I have been wanting to build something like what you have for the past year, but I am out of ideas.
Haha that’s funny a buddy of mine and I did something almost identical to that about 8 years ago. Ours rotated a lot faster, went through multiple layers of rock, we pumped a slurry to flush it out, and stopped around 120’ or 130’. He still uses the well. It was all homemade and something I will never forget. People were amazed that we used an 2 or 3hp electric motor from an old water pump.
Ваш способ уникальный, всё предельно понятно. Молодцы ребята, создайте более мощного станка и запатентуйте, подобного я в интернете не видел. В разных регионах Земли глубина воды разная и если можно пробурить десять и более метров значит надо поработать над вашим проектом. Желаю вам удачи в этом деле.
Тази така наречена ,,кофа" за сондиране е подходяща само и единствено ако пласта със водата е песаклив . Относно затръбието на сондажа слагате твърде остри камъчета , който няма как да се наредят което съответно води до зашламяване на сондажа със пясък . Направили сте правилно дубките на филтъра което ми хареса. Поздрави.
Здравей, благодаря ти за коментара, личи си че имаш опит със сондажите.. но тая “кофа” я ползваме когато има камъни .. или ги изкарваме или ги набива вътре в пръста.. незнам дали се вижда добре на видеото но има капак за почистване.. специално тази дупка нямаше пясък .. и тази кофа я пуснахме на финала преди да положим тръбите.. за да оберем падналата пръст.. понеже водата събаря изкопаната пръст от нормалния шнек.
@@SuperFastDriver Устройството е чудесно! Браво! Не схванах само, слагате ли мрежа, че тия нарези може да са твърде широки и да минават вредни фракции? ❤
This machine is very good , one if the best , professional level thinking procedure wise , but not that cheap and not simple . If you think it s so rudimentary do it it one hour . I m curious even the material total and all the pieces dimensions, it s a lot of engineering and those who made it are great at mechanical and even electrical works.
Always envied you guys in damp environments. The rig is amazing but would shatter in less than three feet here ... Plus my well is at 650' .. Nicely done
You need to think like the well drillers that built and designed the rigs you use today, my grandfather was one of them, he would have loved this idea, laughed at your comment and simply told you build a pneumatic hammer attachment to hang at the bottom of the "drill rods", honestly i could build a system like this for 5 inch wells that would give me a rig that is light and limber enough to get to locations other drillers dare not go. As well as reduce the amount of property damage or clearing that needs to be done when drilling wells, usually wells aren't drilled in places easy to get to, especially these days. No shit welldrillers these days are dieing left and right, none of them want to improve the process, they inherited a way to do it. And will never ever consider a possible alternative to the problems their business deals with in our modern Era.
@@dlayman101 it can always be done and there's always a new way to do it but getting someone to do it that way is a whole another issue. very cool idea though
@@kuztomz any living thing that stops growing learning a d getting better, quickly dies off, the market and nature are no different then one another. Anyone who thinks they are better then everyone else and really believes that, when they never even see if they themselves can do better the the person they were yesterday. Well those people always have been and always will be total failures to everyone around them. Because it may function for a period of time, but if your ideas aren't build on the principals of integrity, Stability, and Growth, then you will never see long term success in any of your ideas, regardless of how much merit your ideas have. Good strong Ideas are no different then good strong species of any biological thing, each one of them adapts, or disappears. So will you embrace your human ability to adapt via the choice of your actions or the principals you choose to base your decision making upon, or will you be as the animals and plants and have your decisions driven by instincts and emotions, all the while believing that you are superior to everyone around you because you know better then anyone else. I dont think people loke that can be changed, I think they have en expiration date stamped to their forehead by mother nature alone. Strength isnt the ability to inflict a greater harm on your enemy, strength is to see when you can make a sacrifice to come to the table to see your enemies are just as human as the rest of us, and that an eye for an eye is an easy trap for all of us, but forgiveness is the only path forward for the redemption of our human selves.... so we need those old bad close minded leader to be here, as an example of how not to lead, I've learned from the mistakes of people around me before I ever even consider thinking I was wise enough to be right about what good leaders are and how they think. Good leaders when hearing the history of the phrase "Murphys law" should have tears of inspiration from the person who coined the term. Unintended consequences of not growing, are somthing you are aware of, or not. It cannot be taught, only be found without extensive inner and outer exploration and reflection.
@@kuztomz sorry for the sermon/lecture. It's my inner dad getting annoyed with both the kids and adults these days, it's not you lol. I apologize that you got caught up in the crossfire there lol. I'm frustrated that we lost the passion for the garage engineers of our history, the ones our modern Era wouldn't have existed if we didn't have them. Don't sell yourself or your idea short, build it yourself, work with a single local bank or some e who you can trust for initial funding, have a slow growth plan that garintees you will always meet or exceed your expected goals, pay off the initial debt and never use anything other then money earned to grow. Beautiful thing about merit, is if your idea has any, then if you build it, they will come, and that's the only marketing class any good businessman ever needs to know.
Can you tell me what is the diameter of the pipe that you use for drilling and that you connect to the drill bits. This is the simplest drilling machine, excellent work Thanks in advance for your reply
Saludos, felicitaciones , una pregunta cual es la razón de la limitante de que llegue solo a los 30 metros? la potencia del motor o la cantidad de tubos con que cuenta?
Hay varias pero lo primero que aparece es el peso del tubo ya que entre mas profundidad es la fuerza que necesitas para darle rotacion a la columna de barras y hay ótras variantes que tambien son importantes
If you use pipe, and pump water down hole then have a space for the water to come back up and return to, you won’t have to keep raising it so much. The drilling fluid will remove the cuttings for you.
Muy interesante, sobre todo para no estar desarmando cada tramo extensor de mecha. una consulta al subir para limpiar la mecha no se cruza en el pozo y se traba? la polea que centra la linga al carretel esta desfasada del centro de perforación por eso la consulta si se cruza. Muy buena idea.. saludos de argentina
If you sent a pipes down behind your drill head, you could've gravity fed water into the top, then pumped it back up at the bottom to clear the hole of dirt and other fine debris. With a simple filter, and I mean simple like a couple of t-shirts and a sediment bucket, you could use the same water over and over again, mostly clearing the hole until you reached your desired depth. At which point stop letting water flow back in, wait a while for the slurry at the bottom to dry out, then raised the drill head.
@@SuperFastDriver If you don't mind refitting your drill's power head, you can install a drill swivel to inject water down the power shaft to the head. This will allow the debris to bias up the shaft to be siphoned off at the top. It's a little more complicated, and you might want to buy the part instead of building it, but it would allow you to drill non-stop until you hit your desired depth. Combines with the return pipe for sediment, it could increase and simplify operation... if you do this kind of thing a lot...
Hi. Thank you for your comment 👍. You can find many information regarding this water well drilling machine in the second part of this video, or refer to the video description.
Muy buena la idea solo tengo una obsebacion constructiba yo soy de Bolivia me dedico como 20 años a perforacion de pozos me gustaria se pueda organizar un intercambio de experiencias para poder exponer lo que cada uno a desarrollado en este rubro por ejemplo yo e tenido que pasar muchas peripecias y experiencias para vencer obstáculos ,y e tenido que rajarme la cabeza como bulgarmente se dice ,y experimentar de algunas ideas que se me ocurria hasta que por fin llegué a lo que esperaba ,claro con esto no quiero decir que todo lo puedo ,como es un sistema manual haun no puedo en terrenos geológicamente no factibles,osea quiero decir en un suelo muy graboso con piedras mayores a dos pulgadas no puedo pero si es menor si lo puedo hacer,y otra ventaja es que con mi sistema mejorada de EMAS del cual fuí alumno puedo llegar a alcanzar el segundo o terser acuifero o quizá el cuarto para tener una agua de calidad,pero no podrian pasar el primer acuifero el sistema de perforacion que vimos antes de mi comentario por que el primer acuifero que encontraron no los permitiria ,por que es una perforacion en seco ,mientras el mio es con inyeccion de lodo ,por el material que sacaban vi que hera arena delgada y esto no permitiria seguir profundisando , con esas características de suelos yo podria llegar fasilmente unos 50 metros hasta mas metros de profundidad, estamos hablando de una perforacion manual con inyeccion de lodo mecanizado.hoy en dia ya lo mecanisé mi equipo pero haun lo sigo haciendo si me piden pozos bajitos 20 a 25 metros y si reune condiciones geológicas factibles.
Esta maquina es para suelo suave, para hacer pozo en cualquier suelo tiene que ser una maquina que golpea con un tubo pesado, tirando tubo desde arriba con veloz
Intresting concept. I was thinking on using PVC pipe and water pressure to go down 20ft first. This could also work for me and maybe percussion drilling combined down to 180ft.
@@akh8501 Hi thanks for appreciating my machine, but sorry to disappoint you that machine is not for sale.. but you have all the info to build it as I did, really appreciate! Thanks
I watched a lot of videos on this topic, this is definitely the best and simplest design. I will try to make one for my needs. Thanks for sharing the idea for this machine.
@@SuperFastDriver В 1975 году в наших краях бурили таким способом. Бурение проводилось вручную без моторов. Глубина 15 - 20 метров. Трубы ставились асбестовые - цементные. Диаметром 32 сантиметра.
The problem with rotary augers is they coat the hole with the clay you are extracting essentially creating a impervious layer (like a pipe) to the water you want access. If you want to improve the well and access to the water you access you will need to flush the clay from the sides with a compressor. Work it hard, flush the clay and your well will improve and provide more water. Water moves through coarse particles ( rock and gravel) but will not pass through fine soil (clay ) that is why pots and vessels made a thousand year ago hold olive oil an water. Get rid of the clay. Open the gaps and improve your water yeild
wow you guys filled around the well casing with stone right to the top. You will contaminate the ground water with surface water run off. There is a reason here in Canada well drillers must be licensed, to prevent exactly what you did. You have to use bentonite grout to seal around the casing to stop surface water from running down and contaminating the ground water source.
Jo a zdravím do Bulharska z Československa :-) Ps: tyhle vrtací (hrabací) hrnce se používají na jihu, asi tam nemáte skály a kamenité podloží? Tady u nás je to samý šutr (rock) a tak se vrtá s příklepem.
@@SuperFastDriver You're very welcome! I wish you and everyone another successful and beautiful day in strength, health and peace! I wish you good luck! 👍🍀🇭🇺🌞☝️
Hi there, this is DIY machine and How to build it you can watch in second part of this video. You can find it in my channel video library. Please don’t forget to subscribe for our channel and 👍 for more videos like this 😄.
Really nice job but I didnt see you putting anything in the hole outside of the casing to seal out ground water. Here in the US, we put small rock in the hole ouside of the casing to filter out mud and sediment, then when the rocks reach about 3 feet above the slitted pipe, we place bentonite clay or sometimes even concrete up ground level to keep ground water runoff out of the well. Where we live, in the groundwater runoff we have bacteria that can make people sick such as giardia and salmonella. If either of those get into your house water system it will make everyone have a really bad day to a bad few weeks with toilet paper and toilet time in high demand at your house.
Very slow but works. I wonder what happens when they hit water bearing sand. I dug mine by hand and at 8’ couldn’t dig any deeper. The hole just kept filling in at the bottom.
I really like that machine! Nice and simple and cheap, yet very affective. Well done!
Do you sell the design for your drilling machine. I live in Texas, United States of America. I have been wanting to build something like what you have for the past year, but I am out of ideas.
Great drilling machine,I like it.
Thank you 😊
@@otisdavies1861de 😮
A great rig, for sure, but it would be about as easy to dig one by hand as to make that machine, unless you know what you are doing, which I don’t.
🎉موفق وپیروز باشند انسانهایی که خدمت به جهان وجهانیان میکنند کوچک وبزرگ❤
Люди, которые служат истинному Богу Библии и людям, будут такими !
Haha that’s funny a buddy of mine and I did something almost identical to that about 8 years ago. Ours rotated a lot faster, went through multiple layers of rock, we pumped a slurry to flush it out, and stopped around 120’ or 130’. He still uses the well. It was all homemade and something I will never forget. People were amazed that we used an 2 or 3hp electric motor from an old water pump.
How did you make the drilling bit? I may give it a try for myself
Also what diameter was the bore? Thanks in advance
Show it if you @did
Thanks. I made one at home and shipped it to my friend. He is very thankful :D
This is my reaction for video title
Thanks. Appreciate if you like 👍 the video and subscribe for our channel 🙂.
At what cost
Ваш способ уникальный, всё предельно понятно. Молодцы ребята, создайте более мощного станка и запатентуйте, подобного я в интернете не видел. В разных регионах Земли глубина воды разная и если можно пробурить десять и более метров значит надо поработать над вашим проектом. Желаю вам удачи в этом деле.
Спасибо!! 🤝👍
Да, согласен, станок уникальный и способ бурения тоже. Молодцы ребята!!!
Ребята молодцы 👍 спасибо за видео обзор 👍.
Классно ! Супер ! Слава Богу за Его великую Любовь, Благодать и Спасение через Иисуса Христа Господа нашего !
Είσαστε πολύ καλοί μπράβο ,μια μικρή διόρθωση όχι λαμαρινόβιδες στην σύνδεση αλλά μεταλλικά πριτσίνια .
Bbh
Ох уж эти болгары, чего только не придумают)) привет из Бессарабии!
Браво! Точно и ясно, а и изглежда постижимо 🙂
Тази така наречена ,,кофа" за сондиране е подходяща само и единствено ако пласта със водата е песаклив . Относно затръбието на сондажа слагате твърде остри камъчета , който няма как да се наредят което съответно води до зашламяване на сондажа със пясък . Направили сте правилно дубките на филтъра което ми хареса.
Поздрави.
Здравей, благодаря ти за коментара, личи си че имаш опит със сондажите.. но тая “кофа” я ползваме когато има камъни .. или ги изкарваме или ги набива вътре в пръста.. незнам дали се вижда добре на видеото но има капак за почистване.. специално тази дупка нямаше пясък .. и тази кофа я пуснахме на финала преди да положим тръбите.. за да оберем падналата пръст.. понеже водата събаря изкопаната пръст от нормалния шнек.
@@SuperFastDriver Устройството е чудесно! Браво! Не схванах само, слагате ли мрежа, че тия нарези може да са твърде широки и да минават вредни фракции? ❤
Sudheer singh yadav from india ❤❤❤❤
Very simple method, suitable for soft soil
This machine is very good , one if the best , professional level thinking procedure wise , but not that cheap and not simple . If you think it s so rudimentary do it it one hour . I m curious even the material total and all the pieces dimensions, it s a lot of engineering and those who made it are great at mechanical and even electrical works.
Exelente demostración, quedé hipnotizado mirando la forma tan versátil de como haces tú trabajo.
Saludos desde México.
I really like that! I have never seen such a drill rig before!!
Muy buena esa máquina.¿ cuato cuesta perforar un pozo de 60 metros?0
in Bulgaria that is about 3500€ .. but our machine is designed to do up to 30 meters..
Евала момчета, машината е добра.
Its such an ingenius machine. I like the electric winch idea to pull the borer out. Great Job.
Thank you
Очень трудоёмкий процесс! Каков статический уровень воды, не проще сделать абиссинскую скважину? Однозначно молодцы!
It's fantastic simply the best for the community how can I purchase send contacts please.
Buenos dias como puedo contactarlos ?
Always envied you guys in damp environments. The rig is amazing but would shatter in less than three feet here ... Plus my well is at 650' .. Nicely done
You need to think like the well drillers that built and designed the rigs you use today, my grandfather was one of them, he would have loved this idea, laughed at your comment and simply told you build a pneumatic hammer attachment to hang at the bottom of the "drill rods", honestly i could build a system like this for 5 inch wells that would give me a rig that is light and limber enough to get to locations other drillers dare not go. As well as reduce the amount of property damage or clearing that needs to be done when drilling wells, usually wells aren't drilled in places easy to get to, especially these days. No shit welldrillers these days are dieing left and right, none of them want to improve the process, they inherited a way to do it. And will never ever consider a possible alternative to the problems their business deals with in our modern Era.
@@dlayman101 it can always be done and there's always a new way to do it but getting someone to do it that way is a whole another issue. very cool idea though
@@kuztomz any living thing that stops growing learning a d getting better, quickly dies off, the market and nature are no different then one another. Anyone who thinks they are better then everyone else and really believes that, when they never even see if they themselves can do better the the person they were yesterday. Well those people always have been and always will be total failures to everyone around them. Because it may function for a period of time, but if your ideas aren't build on the principals of integrity, Stability, and Growth, then you will never see long term success in any of your ideas, regardless of how much merit your ideas have. Good strong Ideas are no different then good strong species of any biological thing, each one of them adapts, or disappears. So will you embrace your human ability to adapt via the choice of your actions or the principals you choose to base your decision making upon, or will you be as the animals and plants and have your decisions driven by instincts and emotions, all the while believing that you are superior to everyone around you because you know better then anyone else.
I dont think people loke that can be changed, I think they have en expiration date stamped to their forehead by mother nature alone. Strength isnt the ability to inflict a greater harm on your enemy, strength is to see when you can make a sacrifice to come to the table to see your enemies are just as human as the rest of us, and that an eye for an eye is an easy trap for all of us, but forgiveness is the only path forward for the redemption of our human selves.... so we need those old bad close minded leader to be here, as an example of how not to lead, I've learned from the mistakes of people around me before I ever even consider thinking I was wise enough to be right about what good leaders are and how they think.
Good leaders when hearing the history of the phrase "Murphys law" should have tears of inspiration from the person who coined the term.
Unintended consequences of not growing, are somthing you are aware of, or not. It cannot be taught, only be found without extensive inner and outer exploration and reflection.
@@kuztomz sorry for the sermon/lecture. It's my inner dad getting annoyed with both the kids and adults these days, it's not you lol. I apologize that you got caught up in the crossfire there lol. I'm frustrated that we lost the passion for the garage engineers of our history, the ones our modern Era wouldn't have existed if we didn't have them.
Don't sell yourself or your idea short, build it yourself, work with a single local bank or some e who you can trust for initial funding, have a slow growth plan that garintees you will always meet or exceed your expected goals, pay off the initial debt and never use anything other then money earned to grow. Beautiful thing about merit, is if your idea has any, then if you build it, they will come, and that's the only marketing class any good businessman ever needs to know.
I VERY LIKE THAT MACHINE
Thank you 👍
Браво младежи!
Здравейте отново,
В същност и за по малки диаметри Ф300-ф400 проявявм интерес !! за цена до 30м на глинесто-пяъчлива почва с редки камъни !
للارض الطينيه ممتاز للاسف في منطقتنا صعب نجاحه ( صخور)
Can you tell me what is the diameter of the pipe that you use for drilling and that you connect to the drill bits. This is the simplest drilling machine, excellent work
Thanks in advance for your reply
Super ! Excellente machine de forage !
Saludos, felicitaciones , una pregunta cual es la razón de la limitante de que llegue solo a los 30 metros? la potencia del motor o la cantidad de tubos con que cuenta?
Hay varias pero lo primero que aparece es el peso del tubo ya que entre mas profundidad es la fuerza que necesitas para darle rotacion a la columna de barras y hay ótras variantes que tambien son importantes
😂😂 Que tropieza con roca¡Adiós invento!
Bravo inventatorilor
Thanks
I really like that machine
Thank you 😊
If you use pipe, and pump water down hole then have a space for the water to come back up and return to, you won’t have to keep raising it so much. The drilling fluid will remove the cuttings for you.
Hi Chris, kindly explain more, what you are saying, I'm interested in doing something like this
Muy interesante, sobre todo para no estar desarmando cada tramo extensor de mecha. una consulta al subir para limpiar la mecha no se cruza en el pozo y se traba? la polea que centra la linga al carretel esta desfasada del centro de perforación por eso la consulta si se cruza. Muy buena idea.. saludos de argentina
thanks for the comment, saludos de Bulgaria! :)
Hi guys! Cool equipment and Great job 👍 I’m drilling a abyssinian wells in Russia, just using a hand drilling machine, what do you mean about it?
Really nice work with simply ingenious tools. Well done.
Thank you for your comment 👍
عمل جيد .هذه الآلة تعمل فقط في الأراضي الطينية و الخالية من الصخور الارضية
Havent even made it 30 seconds into the video and had to give a 👍
احسنتم فكرة جيدة ولكن بدي اسئل
١-كم تبلغ قوة الونج الذي يقوم بالدوران
٢-كم متر أقصى حد له في داخل الأرض
Hi, good day! What happen or what do you do when you find rocks on your way?
You would throw a hissy fit, and that will move the rock
It's a nice idea I thank you for sharing this in youtube
Appreciate for your comment 👍
Nyimak Cara Kerja Mesin Rig Bor Sumur Airnya.
Very nice and great idea, won't work for me with all the stone and boulders in my ground.
Very good work
Thank you
If you sent a pipes down behind your drill head, you could've gravity fed water into the top, then pumped it back up at the bottom to clear the hole of dirt and other fine debris. With a simple filter, and I mean simple like a couple of t-shirts and a sediment bucket, you could use the same water over and over again, mostly clearing the hole until you reached your desired depth. At which point stop letting water flow back in, wait a while for the slurry at the bottom to dry out, then raised the drill head.
thanks for your comment appreciate it! Maybe i will upgrade it at some point , thanks for the idea!
@@SuperFastDriver If you don't mind refitting your drill's power head, you can install a drill swivel to inject water down the power shaft to the head. This will allow the debris to bias up the shaft to be siphoned off at the top. It's a little more complicated, and you might want to buy the part instead of building it, but it would allow you to drill non-stop until you hit your desired depth. Combines with the return pipe for sediment, it could increase and simplify operation... if you do this kind of thing a lot...
How deep did you drill . You found water. nice machine.
Hi. Thank you for your comment 👍. You can find many information regarding this water well drilling machine in the second part of this video, or refer to the video description.
Muy buena la idea solo tengo una obsebacion constructiba yo soy de Bolivia me dedico como 20 años a perforacion de pozos me gustaria se pueda organizar un intercambio de experiencias para poder exponer lo que cada uno a desarrollado en este rubro por ejemplo yo e tenido que pasar muchas peripecias y experiencias para vencer obstáculos ,y e tenido que rajarme la cabeza como bulgarmente se dice ,y experimentar de algunas ideas que se me ocurria hasta que por fin llegué a lo que esperaba ,claro con esto no quiero decir que todo lo puedo ,como es un sistema manual haun no puedo en terrenos geológicamente no factibles,osea quiero decir en un suelo muy graboso con piedras mayores a dos pulgadas no puedo pero si es menor si lo puedo hacer,y otra ventaja es que con mi sistema mejorada de EMAS del cual fuí alumno puedo llegar a alcanzar el segundo o terser acuifero o quizá el cuarto para tener una agua de calidad,pero no podrian pasar el primer acuifero el sistema de perforacion que vimos antes de mi comentario por que el primer acuifero que encontraron no los permitiria ,por que es una perforacion en seco ,mientras el mio es con inyeccion de lodo ,por el material que sacaban vi que hera arena delgada y esto no permitiria seguir profundisando , con esas características de suelos yo podria llegar fasilmente unos 50 metros hasta mas metros de profundidad, estamos hablando de una perforacion manual con inyeccion de lodo mecanizado.hoy en dia ya lo mecanisé mi equipo pero haun lo sigo haciendo si me piden pozos bajitos 20 a 25 metros y si reune condiciones geológicas factibles.
yo quiero un pozo pero mi suelo es desertico con una cama de piedras grandes y solidas
Estimado previo saludo,me podría facilitar su contacto ?
Esta maquina es para suelo suave, para hacer pozo en cualquier suelo tiene que ser una maquina que golpea con un tubo pesado, tirando tubo desde arriba con veloz
👍
Intresting concept. I was thinking on using PVC pipe and water pressure to go down 20ft first. This could also work for me and maybe percussion drilling combined down to 180ft.
I’ve never tried, but with this machine I can drill 50 ft per day if there are no big rocks .. up to 100 feets which in most cases we find water
@@SuperFastDriver Can you dig with this when there are rocks
@@moner844
مستحيل ضعيفة 2_3 حصان هذا دينوا شفط ماء في المنزل
@@SuperFastDriver I am inerested to buy can you contact me plse. Thanks
@@akh8501 Hi thanks for appreciating my machine, but sorry to disappoint you that machine is not for sale.. but you have all the info to build it as I did, really appreciate! Thanks
Great hole!
I watched a lot of videos
on this topic, this is definitely the best and simplest design.
I will try to make one for my needs.
Thanks for sharing the idea for this machine.
I am trying to make a 3D model of the machine. It would make my job easier if I knew the basic dimensions of the machine.
Second part of this video is coming soon , there you will find
İnşaatlarda kullanılan gırgır vinç asansöru ile bu makineyi yapabilir miyim
بارك الله بيكم وارزقكم الله
That's snap in half in the first minute here in Las Vegas LOL they have some really nice dirt and that DIY drill is awesome!!!
Awesome. I Appreciate seeing your economical creation drill that well 🎶👍👍✔️🌠
Thank you
one of the best design...super tx for this video...goood info
Thank you for nice comment 👍😊.
@@SuperFastDrivercan I buy one?
It definitely does the job! Well done!👏🇨🇮🇵🇸
Dobrá práce.
Thank you
Браво момчета
👍
Felicitaciones. Quisiera saber si le hicieron perforaciones al primer tubo y si le agregaron ripio o piedras pequeñas como filtro alrededor .
¡Hola, gracias por tu comentario! Sí, en el primer tubo hay múltiples cortes. Una vez colocados todos los tubos llenamos de grava actuando como filtro
Really cool machine. Do you have a video on making it? How deep is the well? What size diameter of auger bits? Electric motor hp?
I have
made special video for you: Homemade water well drill rig machine - How is made DIY
ua-cam.com/video/VY-ChoZg3nc/v-deo.html
Great idea thanks
Thank you
i know right it helps a lot to me
Thanks for posting the video. Love the system. I'm wondering how to make the bucket or where do I buy it ? Like your other car videos on your channel
thank you so much for the great comment! The bucket also is self made, by using a core with welded carbide tipped drill bits teeth.
@@SuperFastDriver where can buy carbide drill tip
good idea
БЪЛГАРИ - ЮНАЦИ браво 👏👍
Exactly what I was thinking of making.
God job 💚
Thank you 😊
great done
Thank you 😊
Absolutely ingenious, WELL DONE!
Thank you for your nice comment.
Very good
Thank you 😊
Tolle Technik, besonders gut das Sicherungsseil für den Bohrkopf, wenn das Gestänge mal brechen sollte.
Thank you for your comment 😊
Sweet outfit for a diy well auger.
Harbor freight parts to the rescue. Nice to see duty cycle doesn't apply to that hoist!
Where to get this machine guys
Just perfect
Thank you 😊
Хорошая технология.
Thank you 😊
@@SuperFastDriver
В 1975 году в наших краях бурили таким способом. Бурение проводилось вручную без моторов. Глубина 15 - 20 метров. Трубы ставились асбестовые - цементные. Диаметром 32 сантиметра.
The problem with rotary augers is they coat the hole with the clay you are extracting essentially creating a impervious layer (like a pipe) to the water you want access. If you want to improve the well and access to the water you access you will need to flush the clay from the sides with a compressor. Work it hard, flush the clay and your well will improve and provide more water. Water moves through coarse particles ( rock and gravel) but will not pass through fine soil (clay ) that is why pots and vessels made a thousand year ago hold olive oil an water. Get rid of the clay. Open the gaps and improve your water yeild
That’s all we have where I live, red clay and we have a hand dug well that works amazing.
Great work
Thank you 😊
Good job . What is the size of the electro motor ?
Guys, make those machines and sell them to us. I am from Tanzania
100 % самодельное импорто-замещение !
wow you guys filled around the well casing with stone right to the top. You will contaminate the ground water with surface water run off. There is a reason here in Canada well drillers must be licensed, to prevent exactly what you did. You have to use bentonite grout to seal around the casing to stop surface water from running down and contaminating the ground water source.
thanks for your advice..I can give you one as well: you have to think more than just listening people ..
Great job! What are the specifications of an electric motor??
Thank you! Both motors has 220V and 1.1 kw power consumption, please subscribe for the channel if you liked the video :)
Amasing
Jo a zdravím do Bulharska z Československa :-)
Ps: tyhle vrtací (hrabací) hrnce se používají na jihu, asi tam nemáte skály a kamenité podloží? Tady u nás je to samý šutr (rock) a tak se vrtá s příklepem.
Thank you so much for sharing! Super informative, creative, inspiring video creation! Good day!
👍🍀🇭🇺🌞☝️
Thank you for your nice comment 😊.
@@SuperFastDriver
You're very welcome! I wish you and everyone another successful and beautiful day in strength, health and peace! I wish you good luck!
👍🍀🇭🇺🌞☝️
Thank you, one more time 👍. Stay in touch with our channel for more ✌️.
@@SuperFastDriver
Thank you very much! You're very welcome!
👍🍀🇭🇺🌞☝️
good job Can I make a well drilling machine
Permission granted 😄👍
با عرض خسته نباشید لطفا توضیح بدین درست کردن این دستگاه چقدر هزینه دارد
Çok güzel olmuş ama ya taş çıkarsa o zaman ne olacak?
السلام عليكم وين تتباع هذه الآلة ربي يحفضكم ❤❤❤❤❤❤
Hi there, this is DIY machine and How to build it you can watch in second part of this video. You can find it in my channel video library. Please don’t forget to subscribe for our channel and 👍 for more videos like this 😄.
Muito bom, gostei desse estilo de perfuratriz, usa motor rotativo e não precisa de água na perfuração.
Now that's how to frll a well
Really nice job but I didnt see you putting anything in the hole outside of the casing to seal out ground water. Here in the US, we put small rock in the hole ouside of the casing to filter out mud and sediment, then when the rocks reach about 3 feet above the slitted pipe, we place bentonite clay or sometimes even concrete up ground level to keep ground water runoff out of the well. Where we live, in the groundwater runoff we have bacteria that can make people sick such as giardia and salmonella. If either of those get into your house water system it will make everyone have a really bad day to a bad few weeks with toilet paper and toilet time in high demand at your house.
here in Bulgaria we use chlorine to desinfect the water we drink..
Probably best to use chlorine no matter what with such a shallow well anyway.
Awesome job. Very solid and functional build.
Thank you for your nice comment 👍.
Thanks. Please Share schemes.
Thank you for your comment. You can see the details in my other video.
I desparately need this. Where to find you guys
Does it drill solid granite
If we introduce water into the system will it push the mud out without the need to pull the drill screw out everytime?
MAŞAALLAH....ÇOK HOŞ
Wow I really excited
Effortless and excellent technique 👍
Thank you 😊
so , this is soo cool , keep it up 👏👏
Thank you so much!!🙂
hello.nice machine.can you make a list of the materials and how you build it?how much cost you making the drill machine?
I will make separate video specially about that! Thanks
@@SuperFastDriver ok.waiting for the video.keep it like that and many subscribers and like👍
Thank you 😊
Very slow but works. I wonder what happens when they hit water bearing sand. I dug mine by hand and at 8’ couldn’t dig any deeper. The hole just kept filling in at the bottom.
A baixa velocidade é a melhor forma para dar eficiência ao processo....