Hypnotic to look at, love it. Every time you start turning a new piece on the lathe I always worry about your wrist with the kickback. Obviously you know what your doing. Keep it up.
It's definitely rough (and my least favourite part) when you first start turning a piece that isn't round, but it's actually not too bad on your hands/wrists/joints. The cutting tool takes the brunt of it, and you mostly just feel the vibrations going up your arms. It also doesn't last too long, which is nice. I think I was able to get this piece fully round in about 10 minutes or so, and from then on, it's a much smoother experience.
Again, cool piece! I like the fact that its imperfect because it shows that its handmade. In this instance, if it had come out perfectly lined up it wouldn't be as lovely. It would feel too mass market machine made, there for not so beautiful! Great job!
Thank you, Jayson! I have to tell myself the same thing sometimes when pieces don't come out quite the way I'm expecting. Sometimes, there's beauty in the imperfections!
That’s one if I could afford it I would really love in my kitchen right in the center of my table! I just found your channel tonight and what work I have seen so far it is fantastic! You are a very skilled artist! Thank you very much for sharing
What is the purpose of the pressure cooker? Does it eliminate bubbles? How long is it under pressure? For the full cure? Second question. How do you decide which finish to glaze the finished project? Really soothing to watch these videos. Thanks.
The blank looked so snotty and gross when you took it out of the pressure pot that I laughed out loud, but trusted you to make it beautiful, and you did! 😍
A superb method of creating such a unique piece ... it's amazing to see the bowl transforming before your eyes as more and more material is removed, going from flat blocks on the sides to lovely and curvy ... superb 👍
I'm looking to get a bowl saver in the future (it's a tool that carves out another bowl from a larger blank and helps reduce waste), but as of now, the shavings are tossed out.
I was surprised to see that there was a problem with the bowl. It looks beautiful and a true craftsman can make the problems go away, good job. Anyone could do it if it all went as planed. Would it be possible for the resin to cure in the freezer or a refrigerator? That would be a more controlled environment if it would work.
Thank you! And that's a great question/suggestion! I've only come across two other channels on youtube that have tried casting resin in a freezer/refrigerator (for the same reason that I had problems with here; too much volume and curing too quickly), and they actually did have success with those castings. It's something I'm considering, because as you said, it would definitely lend better control and consistency to the process.
@@morgancalvi6675 The boards I used weren't perfectly straight, nor were the cuts I made to turn the whole thing into a hexagon, so there were slight variations in the positions of the wood and the resin. I believe that created the variety of patterns (hopefully that answers your question :) )
Hi Joe! For the bottom, I used some foam core (a paper/foam poster board), and for the outside, I cut off a strip of plastic from this plastic poster board I got from Michael's craft store (in the section with the rest of their posters for things like school projects). I've also had leaking issues in the past, and in my experience, it's not so much the material you use but rather how dilligent you are with applying sealant. I typically just use hot glue, and in the past, I would seal up a mould in about 5-10 minutes and almost always get a leak somewhere. Now, I really take my time and go over every single crack, crevice, or joint and ensure everything is thoroughly sealed before pouring. Fingers crossed, but I haven't had a leak in quite some time now.
@@formanwoodworking thanks for the insight and encouragement. I’ve tried multiple different ways but I think I need to stick with one and be more patient and diligent with the sealant as you suggested. I seamed to have had better results with wood boxes and wood screws along with silicone. However, I’m trying to get used to circular forms so that I can make a bigger bowl. I lose a lot cutting off corners and epoxy isn’t cheap and you are limited to a 6-7” bowl. I’m a beginner and only been doing this since December.
@@joerowell300 I hear ya on the round forms! I was using mostly squares myself when I started out, and yeah, I was having the same problems. Losing a lot on the corners and it really limits the max bowl size you can turn
@@formanwoodworking I noticed at the beginning of the pour there was nothing in the center of the form but at the end it looked like you had inserted a round tube. If so what did you use and why. The dimensions of the wood helps a lot. Thanks for your info. I think I'm going to try it.
@@joemrowell Good eye! I was going to leave the center empty, but I knew I'd be turning that mostly down anyways, so I stuffed a paper towel cardboard roll (with one end taped shut) down the middle just to save me some resin
From Italy : only one word : INCREDIBLE !
WOW! UTTERLY BEAUTIFUL! SO COOL AND RELAXING TO WATCH!!
Always a joy watching what begins as a complete mystery to me evolve into something beautiful! Great craftsmanship fella.
Very beautiful!
Hypnotic to look at, love it.
Every time you start turning a new piece on the lathe I always worry about your wrist with the kickback. Obviously you know what your doing.
Keep it up.
It's definitely rough (and my least favourite part) when you first start turning a piece that isn't round, but it's actually not too bad on your hands/wrists/joints. The cutting tool takes the brunt of it, and you mostly just feel the vibrations going up your arms. It also doesn't last too long, which is nice. I think I was able to get this piece fully round in about 10 minutes or so, and from then on, it's a much smoother experience.
@@formanwoodworking I thought the hips take the brunt of it, no?
Very cool bowl
Again, cool piece! I like the fact that its imperfect because it shows that its handmade. In this instance, if it had come out perfectly lined up it wouldn't be as lovely. It would feel too mass market machine made, there for not so beautiful! Great job!
Thank you, Jayson! I have to tell myself the same thing sometimes when pieces don't come out quite the way I'm expecting. Sometimes, there's beauty in the imperfections!
That’s one if I could afford it I would really love in my kitchen right in the center of my table! I just found your channel tonight and what work I have seen so far it is fantastic! You are a very skilled artist! Thank you very much for sharing
...pretty unique...and beautiful...👍
Matt
I love watching all the processes to make such beautiful items ❤
Вы архитектор своих изделий! Это прекрасно!
What is the purpose of the pressure cooker? Does it eliminate bubbles? How long is it under pressure? For the full cure? Second question. How do you decide which finish to glaze the finished project? Really soothing to watch these videos. Thanks.
Love your work. So fresh and unique💜👍
That is Beautiful
Wow, it is an amazing work.
The blank looked so snotty and gross when you took it out of the pressure pot that I laughed out loud, but trusted you to make it beautiful, and you did! 😍
Love your work,never stop thank you best regards Hans from denmark
Thank you, Hans! That's very kind of you to say. I'll do my best! :)
Stunningly beautiful as usual. ✨💖
Excellent work! Thanks for sharing 👌
Uno più bello dell'altro, veramente, 💯💯💯💯💯💯💯💯👍👍👍👍👍👍👍
Wow it is magnificent and spectacular.
What a beautiful bowl. Even though you are not satisfied with it, I am. Your work is simply amazing.
Thank you, Eileen!
Beautiful
Awesome beauty! Thanks for sharing!!
A superb method of creating such a unique piece ... it's amazing to see the bowl transforming before your eyes as more and more material is removed, going from flat blocks on the sides to lovely and curvy ... superb 👍
Amazing!!!!
Excellent, wonder if you had visualized this before you started 😎
Мастерски выполнено...БРАВО
Looks great
I love it so much!
Nice. Please also make Harry Potter wands.
Hermoso trabajo 👏🏻👏🏻👏🏻🙌🏻
Beautiful. What do you do with all the scrapped material? Can it be utilized for some other project?
I'm looking to get a bowl saver in the future (it's a tool that carves out another bowl from a larger blank and helps reduce waste), but as of now, the shavings are tossed out.
I was surprised to see that there was a problem with the bowl. It looks beautiful and a true craftsman can make the problems go away, good job. Anyone could do it if it all went as planed. Would it be possible for the resin to cure in the freezer or a refrigerator? That would be a more controlled environment if it would work.
Thank you! And that's a great question/suggestion! I've only come across two other channels on youtube that have tried casting resin in a freezer/refrigerator (for the same reason that I had problems with here; too much volume and curing too quickly), and they actually did have success with those castings. It's something I'm considering, because as you said, it would definitely lend better control and consistency to the process.
Very cleaver, you've earned my Subscription.
Thank you, Moe! Appreciate the support!
incredible! it looks a lot like a spider web which i think is pretty badass 🕸️ 🕸️🕸️
realer nice good job
아주 아주 좋아유~~~~~~~~
How did you do this at 6:14? Interesting...you hot glued handles? I have that same shop vac...well at least the top part.
Hi Morgan! My apologies, I'm not quite sure I understand your question. Are you sure it's at the 6:14 mark?
@@formanwoodworking how you got alternating patterns.
@@morgancalvi6675 The boards I used weren't perfectly straight, nor were the cuts I made to turn the whole thing into a hexagon, so there were slight variations in the positions of the wood and the resin. I believe that created the variety of patterns (hopefully that answers your question :) )
@@formanwoodworking oh, ok...I was just making sure there wasn't a pattern I was missing.
🥇
Very different
Jolie pièce 👍
It's heart-breaking watching someone carve away all that resin that costs so much lol
❤❤❤❤❤❤❤
Imperfect, it may be; but it's still beautiful. :)
What kind of plastic did you use for the form and where did you get it? I've had a lot of problems with forms and them leaking. I need some advice.
Hi Joe! For the bottom, I used some foam core (a paper/foam poster board), and for the outside, I cut off a strip of plastic from this plastic poster board I got from Michael's craft store (in the section with the rest of their posters for things like school projects). I've also had leaking issues in the past, and in my experience, it's not so much the material you use but rather how dilligent you are with applying sealant. I typically just use hot glue, and in the past, I would seal up a mould in about 5-10 minutes and almost always get a leak somewhere. Now, I really take my time and go over every single crack, crevice, or joint and ensure everything is thoroughly sealed before pouring. Fingers crossed, but I haven't had a leak in quite some time now.
@@formanwoodworking thanks for the insight and encouragement. I’ve tried multiple different ways but I think I need to stick with one and be more patient and diligent with the sealant as you suggested. I seamed to have had better results with wood boxes and wood screws along with silicone. However, I’m trying to get used to circular forms so that I can make a bigger bowl. I lose a lot cutting off corners and epoxy isn’t cheap and you are limited to a 6-7” bowl. I’m a beginner and only been doing this since December.
@@joerowell300 I hear ya on the round forms! I was using mostly squares myself when I started out, and yeah, I was having the same problems. Losing a lot on the corners and it really limits the max bowl size you can turn
@@formanwoodworking Some final questions about the wood. You said it is poplar but would you share the dimensions of the wood?
will you share the size of the wood used?
Hi Joe! The planks I used were 1/4" thick, 5.5" wide, and I cut them down to 2 feet in length before making the blank. Hope that helps!
@@formanwoodworking I noticed at the beginning of the pour there was nothing in the center of the form but at the end it looked like you had inserted a round tube. If so what did you use and why. The dimensions of the wood helps a lot. Thanks for your info. I think I'm going to try it.
@@joemrowell Good eye! I was going to leave the center empty, but I knew I'd be turning that mostly down anyways, so I stuffed a paper towel cardboard roll (with one end taped shut) down the middle just to save me some resin
You should call this the spider bowl!
What did you use for the finish??
Waterlox's Original VOC Compliant varnish: waterlox.com/originalvoc/
Can we have soups in this bowl
Wahouuuu !!!!!
This even beats the blue bamboo bowl.
@Forman_Woodworking f u
Is this hexagon bowl for sale?
Hi Judy! And it will be in the next week or two when we get our online store launched, so check back here for updates!
@@formanwoodworking I will be sure too. Thank you.
👍Beautiful!👏👏👏 Bye😊
Really sorry , this one i didn't like it...but loved the way you work.🫡
Beautiful