I dont have the software, I cannot afford a powerful computer. But I want to learn CAD. I learn by watching your videos. Thank you for making such wonderful tutorials.
you are right, but then again method shown here is technically closer to how actual ball bearing is built. And as such perhaps more benificial from point of learning how to build ever more complex working assemblies...
15:40 I've gotten to this point flawlessly, the inner ring rotates with the ball and no constraint gives any error. Once I use the circular pattern option and get the 8 balls instead of 1, the inner ring is stuck, it doesn't rotate anymore, I'm a noob and I'm out of ideas tbh, can anyone help me with this?
Your video's are great, but the constrain at 15.07 is wrong. Now the ball will rotate with the same speed as the inner ring. This isn't the case with a ballbearing.
Thankyou for great videos! I followed along well until I got to component pattern on Ball. Moved freely before circular pattern. Once patterned i can no longer rotate nor click the ball itself only outer and inner ring can be highlighted. ( also tried rotating from inner ring, still doesn't work). If anyone knows why id love to know.
Please can you help me sir. I have avidly been following your tutorials. When I select pattern and place the additional balls it fails to rotate. I have followed every step of your tutorial. Please help
I'm beginner in Inventor, and for me this is very strange concept of work. Do you have always to create parts individual and then join them over assembly option? For instance how you develop something, when you have more parts and of course you have to measure them and make correlation between them.
@@bananarama4925 When trying to rotate don't click on the balls instead click on the inner ring and see if it helps cause i was experiencing the same problem as well
So I drew all the individual parts accurately. Now when i came to the assembly part , each part scale is different from another. I don't understand what I did wrong. I followed each step of this video. Has anybody went through something similar? if so, please tell me how to fix this. I really don't wanna re-draw each part again.
Check your dimensions , it tends to change when you want to create another part , so always take note before you start , or better still instead of selecting part , just create new but endeavour to save under the same folder and select all parts while saving so you don't miss anyone out
I liked the tutorial, however you said one thing like use xz axis and actually picked a different one yz which made me go back multiple times and review the video to find what you really did. So your 20 minute video ends up taking much longer.
Wait wait wait why my iner ring become bigger than outer ring?? Dont dont know how my iner ring become so big N please talk slowly im still new here.. Actualy how the size count?
Sir can I borrow your file? for me to be able to pass my final requirements. I just dont have the money and laptop to do it. If you can borrow me. I will really appriciate it a lot. Thank you in advance.
You talk too fast - SLOW DOWN! You also don't explain what must be clicked or what must be held down to get a command to do something. - the inner ball, once it is placed how do you rotate it? If you had said hold down left mouse button and cursor on inner cage to rotate, then everyone would have understood that.
Just leaving a comment for the algorithm, you guys have made the best series of tutorials on YT. Thanks!
Perfect, my friend please continue doing inventor's videos to learn more , thank you so much !!!!!
you are an absolute genius! I love this channel so much it helped me come such a long way
I dont have the software, I cannot afford a powerful computer. But I want to learn CAD. I learn by watching your videos. Thank you for making such wonderful tutorials.
Why don't you download Fusion 360 for free? The computer requirements are much lighter than most CAD programs.
Product Design Online Yes sir, I have fusion 360. Thanks for the advice. I am a big fan of your channel. You are doing great work.
@@FaizanAli-op2xe Great! Glad to hear you already have it.... and thanks for the kind words! Cheers, Kevin :)
Product Design Online you are welcome
I am brand new to DAW and soft soft - these tutorials are excellent an very helpful to get soone like up and running. Appreciate
you´re a great teacher!. Thank you so much!....from korea
thanks, Thanos, glad you're getting into soft instead of...well...
You are a true Inspirer sir, thank you for inspiring me.
Your video give us a great lesson......
I´m in love with tNice tutorials tutorial!!!!
Your voice sounds like the Stephen hawking voice😁... excellent video. Muito obrigado por compartilhar este conhecimento connosco 💪
Thank you very much, you´re a great teacher :)
That was great thank you. More Inventor videos like this please.
Thank You!
Good joob man
thx from Italy engineer
Excelenc bravo!!!!!!!!! Спасибо !!! Ты Мужчина! Я из Казахстана! Ты красавчик! Так просто, о сложном. Спасибо, что есть такие люди среди нас.
Thanks so much for making this!!! It helped lots
Very helping tutorial!
Can you design a ball valve. I have learned so much from your videos. You are a great teacher.
We can mirror the cage along the plan as well right?
Great video!
i think u can use mirror rather than put 2nd cage, and constrain it with first cage on XY Plane
you are right, but then again method shown here is technically closer to how actual ball bearing is built. And as such perhaps more benificial from point of learning how to build ever more complex working assemblies...
Nice tutorial. Thank you
Great Great video, thanks again, i have do all it but only with the second cage i have used mirror tool, is much more fast, is good?
Thank you very much for this usefull lesson. :-)
15:40 I've gotten to this point flawlessly, the inner ring rotates with the ball and no constraint gives any error. Once I use the circular pattern option and get the 8 balls instead of 1, the inner ring is stuck, it doesn't rotate anymore, I'm a noob and I'm out of ideas tbh, can anyone help me with this?
thanks a lot for this tutorial sir !!!!
THANKS !
Thank you, sir!
Your video's are great, but the constrain at 15.07 is wrong. Now the ball will rotate with the same speed as the inner ring. This isn't the case with a ballbearing.
Right here with ya, bro
Thankyou for great videos! I followed along well until I got to component pattern on Ball. Moved freely before circular pattern. Once patterned i can no longer rotate nor click the ball itself only outer and inner ring can be highlighted. ( also tried rotating from inner ring, still doesn't work). If anyone knows why id love to know.
Thanks... Excellent
Why not make the inner ring, outer ring and balls in one file? Why make them separate?
best tutorial my freind very good ! :D
nice....thanks
Please can you help me sir. I have avidly been following your tutorials. When I select pattern and place the additional balls it fails to rotate. I have followed every step of your tutorial. Please help
When trying to rotate don't click on the balls instead click on the inner ring and see if it helps cause i was experiencing the same problem as well
Good job
Sir we need to learn, how to draw Thrust ball bearing
Thank you sir ❤️❤️
thank you for your effort sir.
Thank you sir.....
please help sir, at the time of assembly-when i insert to assembly then size is different outer ring small & inner ring very big, how fix this
Very good friend - mr T from v10
Superrrrr........ 😍😍😍😍
I'm beginner in Inventor, and for me this is very strange concept of work. Do you have always to create parts individual and then join them over assembly option? For instance how you develop something, when you have more parts and of course you have to measure them and make correlation between them.
with a big brain
sir ye aap konsa version use kr rhe hai ?
Thank you very helpful
Thanks for the video🔥, but mine can't spin. What should i do?
I have the same problem *-*
When trying to rotate don't click on the balls instead click on the inner ring and see if it helps cause i was experiencing the same problem as well
@@bananarama4925 When trying to rotate don't click on the balls instead click on the inner ring and see if it helps cause i was experiencing the same problem as well
you should mate the x,y,z origin axis with the inner ring x,y,z axis
Thank you so much
Hello, on my 2nd sketch, Why my "model" feature unavailable? so i cant choose X axis? thanks before.
Great videos
Sir, how to adding this bearing to Autodesk Inventor's Content Center Library?
Sir ap solid work ka konsa used karte ho 2014/2016/2019
Version
Tech mech Diplo Solidworks 2016
Which version of Autodesk Inventor is this ?
Thank you.. soooo much
So I drew all the individual parts accurately. Now when i came to the assembly part , each part scale is different from another. I don't understand what I did wrong. I followed each step of this video. Has anybody went through something similar? if so, please tell me how to fix this. I really don't wanna re-draw each part again.
Check your dimensions , it tends to change when you want to create another part , so always take note before you start , or better still instead of selecting part , just create new but endeavour to save under the same folder and select all parts while saving so you don't miss anyone out
@@olawuyidaniel677 It was different units. I was in a different unit than what this youtuber was in. Thanks.
You are welcome
can someone tell me why cage has to select XZ plane instead of XY plane?
Why should any body create it , where you can insert it ready by standard from content center libraries???
i facing the issue of mating the axis of cage and axis of inner ring
very good for new cumors
when i try to assambly it does not rotate ... any advice?
i dont know too
You have link aplication?
I liked the tutorial, however you said one thing like use xz axis and actually picked a different one yz which made me go back multiple times and review the video to find what you really did. So your 20 minute video ends up taking much longer.
its really gooda
how to rotate inner and auto ball rotate? for me not work :( sorry my english bad
Good sir good
parabéns munto bom
Sir please make tutorial for catia
no me sale hacer el giro del rodamiento
It's the UA-cam that put ads bruh
Hi can you make please tutorial for crane brake? in solid works
Please also start CATIA tutorials.
Wait wait wait why my iner ring become bigger than outer ring?? Dont dont know how my iner ring become so big
N please talk slowly im still new here.. Actualy how the size count?
Same problem happened to me! trying to figure that out. all the dimensions were followed
@@mathrewmarrero6942 how to fix?
@@louiegiehermosilla2542 units are not in m or mm.
@@Matt-ry2zk thanks already assemble but not rotating sir
👍👍👍👍👍👍👍👍👍👍👍👍👍👍
👍👍👍👍
Sir can I borrow your file? for me to be able to pass my final requirements. I just dont have the money and laptop to do it. If you can borrow me. I will really appriciate it a lot. Thank you in advance.
hahahahahaha XD
You talk too fast - SLOW DOWN!
You also don't explain what must be clicked or what must be held down to get a command to do something. - the inner ball, once it is placed how do you rotate it? If you had said hold down left mouse button and cursor on inner cage to rotate, then everyone would have understood that.
🤓
nice tutorial but not beginner, bad explanation and too fast to execute not give any chance to understand
*bonk*
balls hehe
rewas ngomongna eweuh jeda