I witnessed one of these XC and the longer version in extended usage. Very impressive suppressor. Looking forward to having one. Id highly recommend these in a big way
I wanted to buy one until he said it was rated only down to 6" barrels for 300 Blackout. That means it should not be used for my Sig Rattler, which has a 5.5" barrel.
Looks like a pretty sweet can. I've been keeping an eye out for one of these since I first found out about them but they're always out of stock; everywhere I look. I really hope they start ramping up production...
I have a Banish300 on order. How much better is the DANTiXC than the one I have already purchased? If they are that much better, it looks like I need two, both the short and long.
Yep. DA gave me wrong information on a muzzle device. I asked them specifically if it was tapered for MPX. Went to install it on my MPX and sure enough. Not tapered. I followed up with them and were beating around the bush to answer the question. I had to straight blank tell them. “Did you’ll tell me wrong info on this muzzle device?” Finally came with, “yes we told you wrong”. And no they did not bother to fix issue nor swap out muzzle device. I couldn’t return it as I purchased from a dealer during the time I was waiting for approval. Not to mention also making the Key Mo micro mount I also purchased useless. I now been buying CAT cans instead since then. No more Dead 💩 Air purchases.
I have one and it works great. I think they’ve got them all fixed now. Haven’t heard anything. You know that the ones they’re selling now they’re gonna be good because they don’t want no more problems. Customer service will always be an issue with stuff like this because of the legal process and lawyers involved and people afraid of getting sued. You can sue a ham sandwich now not make excuses Dear Air why they didn’t address this, but you know it’s probably due to lawyers.
@@1stidvet553 yes. It’s a completely different design, look at a nomad cutaway vs a Sierra cut away. It’s made by different people, KGM was contracted to build the Sierra, they’re not making the Nomads. The Sierra used traditional Inconel baffles, this uses DMLS titanium. They couldn’t be more different.
@@kellykrueger1822 the original warranty manager under that program has been fired. I'm a dealer and I send back more cans than anyone in this comment section. I've never had a problem with DA. Most cans are coming back from repair within 2 weeks right now.
@@williamboggs1682 on a welded tubeless design like the Sierra each baffle is laser welded to the next baffle. If the surface isn't perfectly clean, if the welder isn't at the right temp, if something is just a 1/16" off the weld can be compromised. If you were to burn a welded can until failure it would fail at the thin welds. DMLS is basically a giant tube of pure weld. Each particle of material, think of it like fine sand, is printed together. There are no welds to fail. It's almost impossible for things to not be concentric. It's basically a solid block. If you were to try and burn a DMLS can to failure you would have to superheat the material until it goes past it's heat treat and becomes brittle enough to crack. Which in the case of 3D printed Haynes 282 you will destroy your firearm first many times over before you got a 3D printed can to do the same.
I witnessed one of these XC and the longer version in extended usage. Very impressive suppressor. Looking forward to having one. Id highly recommend these in a big way
They are very impressive, I was blown away during our testing and evaluation.
@@SilencerShopbetween the CAT ODB and this for 300blk what would you recommend
Back ordered for 4 months. Hoping to get mine in soon
Ran across one of these in a funstore today. Deceptively light is an understatement.
Would be nice to know when DA plans to start shipping these. I’ve had one back ordered through Silencer Shop since mid March and so far crickets.
same...
Euro Optic has them in stock as of yesterday
That's pretty smooth.
Silky Smooooooth.
Dead Air is awesome
They make awesome silencers!
Really want one soon. Beautiful
It's awesome! You'll love it.
I wanted to buy one until he said it was rated only down to 6" barrels for 300 Blackout. That means it should not be used for my Sig Rattler, which has a 5.5" barrel.
That is correct.
It'll be fine. Do it. If the bullet is stabilizing then you're fine.
What about firing schedule is this a dilligent defense 800° or a cat 650° lol
Looks like a pretty sweet can. I've been keeping an eye out for one of these since I first found out about them but they're always out of stock; everywhere I look. I really hope they start ramping up production...
They're available for reservation now!
@@SilencerShopBut when will they actually be available? They've been up for preorder for quite a while
How about the LTI vs the CAT JL
Great video ! Would you recommend this nomad xc ti or a CAT ODB for 300blk?
Has silencer shop even received any of these yet?
Set to get more soon!
Willing to keep pushing this can and completely ignoring the people have already ordered months ago. ANY update would be great.
They're shipping now!
I have a Banish300 on order. How much better is the DANTiXC than the one I have already purchased? If they are that much better, it looks like I need two, both the short and long.
The Nomad XC line is incredible, lightweight, sounds great, and HUB mount makes these perfect for a variety of rifles.
Velos lbp 5.56 re stock when?
Fingers crossed we get more soon.
With a direct threads muzzle adapter on it, is it lighter than the Scythe with a muzzle adapter?
The Scythe is a couple ounces lighter with the DT mount.
I’m a DA owner and the way they handled their recent issues was… lacking.
I encourage my friends to consider other brands
Also a DA owner. Buy Thunder Beast
Yep. DA gave me wrong information on a muzzle device. I asked them specifically if it was tapered for MPX. Went to install it on my MPX and sure enough. Not tapered. I followed up with them and were beating around the bush to answer the question. I had to straight blank tell them. “Did you’ll tell me wrong info on this muzzle device?” Finally came with, “yes we told you wrong”. And no they did not bother to fix issue nor swap out muzzle device. I couldn’t return it as I purchased from a dealer during the time I was waiting for approval. Not to mention also making the Key Mo micro mount I also purchased useless. I now been buying CAT cans instead since then. No more Dead 💩 Air purchases.
😊
🙌
Would be nice if they made a stainless steel version
Maybe!
The standard stainless nomad is still fantastic
I don’t think this can would be good for an AR 15 , made out of titanium
It sounds great, but definitely optimized for precision guns or 300BLK ARs.
When are they available ?
You can reserve one now!
@@SilencerShop Reserve one for when? Are they coming in to stock soon or 2025 (like the Aero thread adaptors)?
@@davehedge5044don’t hold your breath
After all the Sierra 5 issues..nope.
It’s a completely different can, made by completely different people, using a completely different process.
I haven't heard anything about this. What happened?
I have one and it works great. I think they’ve got them all fixed now. Haven’t heard anything. You know that the ones they’re selling now they’re gonna be good because they don’t want no more problems. Customer service will always be an issue with stuff like this because of the legal process and lawyers involved and people afraid of getting sued. You can sue a ham sandwich now not make excuses Dear Air why they didn’t address this, but you know it’s probably due to lawyers.
@@TheEDCTribedifferent people huh? You know this for a fact?
@@1stidvet553 yes.
It’s a completely different design, look at a nomad cutaway vs a Sierra cut away.
It’s made by different people, KGM was contracted to build the Sierra, they’re not making the Nomads.
The Sierra used traditional Inconel baffles, this uses DMLS titanium.
They couldn’t be more different.
After the sierra5 debacle, I’ll pass
The sierra 5 was welded. This is created with DMLS. Not even in the same ballpark.
@@MossyOakFreak not about the construction, it’s how they handled it.
@@kellykrueger1822 the original warranty manager under that program has been fired. I'm a dealer and I send back more cans than anyone in this comment section. I've never had a problem with DA. Most cans are coming back from repair within 2 weeks right now.
Why
@@williamboggs1682 on a welded tubeless design like the Sierra each baffle is laser welded to the next baffle. If the surface isn't perfectly clean, if the welder isn't at the right temp, if something is just a 1/16" off the weld can be compromised. If you were to burn a welded can until failure it would fail at the thin welds. DMLS is basically a giant tube of pure weld. Each particle of material, think of it like fine sand, is printed together. There are no welds to fail. It's almost impossible for things to not be concentric. It's basically a solid block. If you were to try and burn a DMLS can to failure you would have to superheat the material until it goes past it's heat treat and becomes brittle enough to crack. Which in the case of 3D printed Haynes 282 you will destroy your firearm first many times over before you got a 3D printed can to do the same.
Friends don't let friends buy dead air.
They have been great to me every time very satisfied with Dead Air