Thank you my mistake was the Pin and the GPIO was changed. With your simple explenation I could find the error, (you Changed D2 to D4) in My place D7 was not D7 it was D13. That solved my Webhook Problem that resetet the NodeMCU after every Alexa command. You did a god Job!
Go to 9:25 and see witch pin on your NODMCU is the right GPIO pin you have to change them to the right. Pin D1 is not GPIO 1 so you have to find the right pin to define in code than it should work.
Hi, I have a question, how would I if I wanted to say the voice command to activate and deactivate after a short time without having to add two different commands, in other words it works as a doorbell button and not as a switch of light, thank you translated by google translator
Hai Can we use the same single nodemcu to work with ifttt and blynk simultaneously in a single program? Ie; I need to get telegram call when motion detected in my home and I should be able to control my lights through blynk. Is it possible?
hi I have a dought that can I do this project with an Arduino Uno waiting for the reply one one more dought that can I do this project with a blynk local sever
Hai sir Im doing GSM based Blynk project, I am facing this problem What if Device disconnects from GPRS? How to handle it ? Did you implement Watchdog timer with Blynk ? using GSM sim800L and Atmega328p-pu for my Blynk project, it disconnected after 3days, then I had to restart the device manually, I don't want to do this manually,I also tried Watchdog timer,but it fails to work with Blynk.please help
Hello i made this but this project work with my mobile hotspot internet When i connect in my home wifi router he is not connect serial monotor show blyank-cloud.80 Please tell me what i do ....
Sir I receive a 500 error on ifttt. I have checked everything and it appears to be correct. Is there something else I should look for to determine the reason?
thanks for making video. i did it successfully i have 3 light and i want to all lights on OR off in one command then how to write in webhook URL section ?
sir, thank you very much for helping me to do this project .google assistant in my phone responds to my commands but does not tell , ok turning the light on or off what may the problem.please reply.
Thank you my mistake was the Pin and the GPIO was changed. With your simple explenation I could find the error, (you Changed D2 to D4) in My place D7 was not D7 it was D13. That solved my Webhook Problem that resetet the NodeMCU after every Alexa command.
You did a god Job!
Go to 9:25 and see witch pin on your NODMCU is the right GPIO pin you have to change them to the right. Pin D1 is not GPIO 1 so you have to find the right pin to define in code than it should work.
This video is a masterpiece, thanks for save my semester
you're a legend sir made my day
THANKS AA LOT SIR MY PROBLEM ARE SOLVE MAY YOU LIVE LONG
Thanks sir I wass confused with D0 and G PINs finallly my projects is working
Can we connect a regular fan to the project please say......
Thanks sir ... helpful video sir
thank you for the video.
Thanks for sharing!
The situation is different now after the blynk site update that they don't send the authentication code on email. So what do we do now?
Can we control multiple remote smart plugs which are connected to different networks from one app/place/cloud?
thanks for making video. i did it successfully
Did the device works with google assistant
Hi, I have a question, how would I if I wanted to say the voice command to activate and deactivate after a short time without having to add two different commands, in other words it works as a doorbell button and not as a switch of light, thank you
translated by google translator
Amazing project...I did it successfully...Thank you....
Sir, How do we add manual on/off button in Google assistant just like we have in Blynk App?
ありがとうございます。できました。
Sir commands are very slowly working
Whenever i on or off switch it takes 10 sec to on or off
Hai
Can we use the same single nodemcu to work with ifttt and blynk simultaneously in a single program?
Ie;
I need to get telegram call when motion detected in my home and I should be able to control my lights through blynk.
Is it possible?
Super 👍
How can i display sensor value on Google Assistant
hi I have a dought that can I do this project with an Arduino Uno
waiting for the reply
one one more dought that can I do this project with a blynk local sever
excelent!!! Sir, how can i do it with a servo mg995? thanks!
and can i control 2 servo motor at a same time using google assistant
Amazing, great job
Thanks friend great tutorial,
but what if we want to control a button to open the garage door. it could be ["1> 500 ms delay> 0]"
Se puede hacer eso?
thanks this is great project
I’ve done this for a temperature sensor .. will I need to change anything
sir i did same like u so, blynk works but google assistant did not work.plz give some suggestion
IFTTT not providing more than 3 applets free. In this how can I do this project
Hai sir Im doing GSM based Blynk project, I am facing this problem
What if Device disconnects from GPRS? How to handle it ? Did you implement Watchdog timer with Blynk ?
using GSM sim800L and Atmega328p-pu for my Blynk project, it disconnected after 3days, then I had to restart the device manually, I don't want to do this manually,I also tried Watchdog timer,but it fails to work with Blynk.please help
sir will you please help me to setup google assistant
because when i firing trigger assistant went to google search?
pls help
Thank you kind sir, it worked
Thank you so much :)
How to trigger 2 pins with a single command. Also how to add duration to a command??
can i control servo motor using google assistant ????
Hello i made this but this project work with my mobile hotspot internet
When i connect in my home wifi router he is not connect serial monotor show blyank-cloud.80
Please tell me what i do ....
Hello, how can I turn on the light and the fan at the same time? how is the url code?
Sir I receive a 500 error on ifttt. I have checked everything and it appears to be correct. Is there something else I should look for to determine the reason?
How do I find weather my relay board is low powered or high
Sir can you make on the video to control the device through Blynk app by using micropython (thonny IDE)
excellent work, thank you, but why ["0"] is ON and ["1"] is OFF? ;)
Relay board used is LOW enabled. A LOW switches ON the relay and a HIGH switches OFF.
@@SaravananAL I see, ok. Thank you.
@@SaravananAL why applet is showing error 500 ..is that due to blynk cloud server.. please check your's now and tell me sir.. it's urgent
URL NOT PROVIDED PLZ PROVIDE THE URL LINK WHICH U INPUT IN WEBHOOK
I do already same think but showing error 404 on fittt web site
Sir, what i need to do if i want to make web request to control digital pin of raspberry Pi using Google assistance
You can call an API with Webhook which can publish on or off on the mqtt topic
thanks for making video. i did it successfully
i have 3 light and i want to all lights on OR off in one command then how to write in webhook URL section ?
hola, tambien quiero saber como es ese comando
Can you share the code
Thank You
sir, thank you very much for helping me to do this project .google assistant in my phone responds to my commands but does not tell , ok turning the light on or off what may the problem.please reply.
You have to enter the response phrase when setting up IFTTT applet.
It's "What do you want the Assistant to say in response?"
SIR I was getting like something went wrong and unable to control home device from google assistant
Even I have the same problem
thanks sir
add manual switches also
webhooks not working on my project
how to control D4 and D5 in single command
No me activa ifttt con Google Asistant me sale error 404
Sir ap online training dete h
use a push button not a switch
I need code sir, can u help me
reply me fast
i have to do it now
sir code
give me to code plz
Coding please
sir, you are so talent please sir how to create free internet with others board esp8266 or Arduino etc.
now google assistant cant do that?? you must pay to do it
where is this info coming from
The situation is different now after the blynk site update that they don't send the authentication code on email. So what do we do now?
The situation is different now after the blynk site update that they don't send the authentication code on email. So what do we do now?
The situation is different now after the blynk site update that they don't send the authentication code on email. So what do we do now?