I really want to thank you. I have been watching your videos for 2 years and i learned a lot. I did a lot of your tutorials. I love how simple and efficient you explain things. Thank you man.
If the video is too l0ng, That's no problem. But without details of each component and all steps, the video is not helpfull. You are the great. Thank you so much big brother. Love from Bangladesh...🇧🇩
Nice project sir. Built it as per tutorial. I am trying to replace push button to HTTM sensor, where I have problem with sensor state when the relays are controlled by blynk. Kindly help me with this.
You have used a capacitor in your custom pcb board but have not mentioned it's value can i know the value of the capacitor please. I need it for my project 😢
@@TechStudyCell project is great i face one problem when i restart the device my device go to off line and then i am reconfigure the device from my mobile then work properly and then again the device reset fault is same and i am again reconfigure the device. i don't know where is problem. so please help me
Here's my small doubt , Why are you (and also other UA-camrs) limiting the project to only a few modes of operation? Like wifi+manual (no infrared & no Bluetooth control & no voice assistant ) Wifi+manual+infrared (no Bluetooth) What is the limitation here? Please clarify.. I'm trying to make it for my home And i need as many controls as possible Please reply soon 🙏🏻🙏🏻
Bro when we use different kinds of controls we should use seperate pins of esp for each... and we have only a limited number of pins.. there is no way to extend the number of pins.... but for real use u can choose the latest vertion of esp module which have enough pins to control enough loads for a normal home..! But when no. Of load increases we should reduce the no. Of control methods
@@shifan.k.f7986 thanks for the reply, but no it's not true, My actual doubt it's for example we have the pin D2,i want to control it with as many ways as possible Like Bluetooth Wifi Manual switch Ir remote We are successfully using all the modes of operations but in different projects not all in one. That's what my doubt is.
I am trying to drive a single channel relay with node MCU . I am powering relay and node MCU with different sources. The relay is blinking but the relay click is not happening. Can someone please help me
Hai Can we use the same single nodemcu to work with ifttt and blynk simultaneously in a single program? Ie; I need to get telegram call when motion detected in my home and I should be able to control my lights through blynk. Is it possible?
Hello Brother isme Humne stepper motor ko Rang karna hai kya possible hai koi aisi video Nahin aapki I stepper motor ki video please koi upload Karen staple motor ko ran karne ke liye aur usko close karne ke liye anti clock wise laane ke liye
@Tech StudyCell project is great i face one problem when i restart the device my device go to off line and then i am reconfigure the device from my mobile then work properly and then again the device reset fault is same and i am again reconfigure the device. i don't know where is problem. so please help me
bro i have done all the steps clearly but when i press ESP8266 Blynk device buttons that i created which are OFF and ONN two button nothing happens...what could be the issue. it doesnot turn the state of button to ONN . it stays OFF
I really want to thank you. I have been watching your videos for 2 years and i learned a lot. I did a lot of your tutorials. I love how simple and efficient you explain things. Thank you man.
You are welcome.
If the video is too l0ng, That's no problem. But without details of each component and all steps, the video is not helpfull.
You are the great. Thank you so much big brother. Love from Bangladesh...🇧🇩
Excellent tutorial sir, Love from Bagladesh.❤❤❤
Thanks
Excellent tutorial very well explained. Would be good if you can include ESP32
Nice project, sir can you please do also home automation using esp32 with 8channel relay , manual siwtch, blynk , google assistant. thank you.
Nice project sir. Built it as per tutorial.
I am trying to replace push button to HTTM sensor, where I have problem with sensor state when the relays are controlled by blynk. Kindly help me with this.
Nice video, can you please do also homekit using esp32 with 8channel relay. Thank
You have used a capacitor in your custom pcb board but have not mentioned it's value can i know the value of the capacitor please. I need it for my project 😢
Hi friend, make the esp8266 wifi fan speed with manual switch + lights project
Very good explanation.thank you bro.
Welcome
@@TechStudyCell project is great i face one problem when i restart the device my device go to off line and then i am reconfigure the device from my mobile then work properly and then again the device reset fault is same and i am again reconfigure the device. i don't know where is problem. so please help me
Too good bhaiyya👍
Do you know the board configuration for esp 8266 12-e ?
Not node mcu board, the standalone 8266 12-e. I think led pin was 2 but I am not sure whether it is common anode or cathode.
Thanks for sharing, I send a coffe for you
Thanks for the support ❤️
@@TechStudyCell I send an e-mail for you
@@TechStudyCell why no responding the e-mail I send for you?
What is use of relay ?
What is output voltage? 2:52
Here's my small doubt ,
Why are you (and also other UA-camrs) limiting the project to only a few modes of operation?
Like wifi+manual (no infrared & no Bluetooth control & no voice assistant )
Wifi+manual+infrared (no Bluetooth)
What is the limitation here?
Please clarify..
I'm trying to make it for my home
And i need as many controls as possible
Please reply soon 🙏🏻🙏🏻
Bro when we use different kinds of controls we should use seperate pins of esp for each... and we have only a limited number of pins.. there is no way to extend the number of pins.... but for real use u can choose the latest vertion of esp module which have enough pins to control enough loads for a normal home..! But when no. Of load increases we should reduce the no. Of control methods
@@shifan.k.f7986 thanks for the reply, but no it's not true,
My actual doubt it's for example we have the pin D2,i want to control it with as many ways as possible
Like
Bluetooth
Wifi
Manual switch
Ir remote
We are successfully using all the modes of operations but in different projects not all in one.
That's what my doubt is.
I am trying to drive a single channel relay with node MCU . I am powering relay and node MCU with different sources. The relay is blinking but the relay click is not happening. Can someone please help me
Sir can you please give code for 4 channel relay for this same project? Waiting for your reply . Soon I have to submit project.
@Tech StudyCell sir what do I need to change in sketch to use touch switch using tp223 instead of push button?
Code for switch is unavailable
Can you please attach the code required and library in comment section
Bhai I am unable to code my nodemcu please help me ... During coding it showing Error compilation in Esp 8266
install all library of this project
Hai
Can we use the same single nodemcu to work with ifttt and blynk simultaneously in a single program?
Ie;
I need to get telegram call when motion detected in my home and I should be able to control my lights through blynk.
Is it possible?
Yah complete PCB mil sakti hai kya with component
Sir, I'm having issue, kindly reply me in your previous video of 4 channel relay.
Please Make video with ESP 8266 01 Wifi Module Not NodeMCU by programming Arduino
Please watch complete video, in this video I have also used ESP01
New blynk app problem.
Save template in browserand app did not show the template
Do you have this product all assembelled available please?
Hello Brother isme Humne stepper motor ko Rang karna hai kya possible hai koi aisi video Nahin aapki I stepper motor ki video please koi upload Karen staple motor ko ran karne ke liye aur usko close karne ke liye anti clock wise laane ke liye
My friend im trying to get the code but still i cannot find it
Sir can you please provide the schematic of the project so that we can edit it in easyeda
@Tech StudyCell project is great i face one problem when i restart the device my device go to off line and then i am reconfigure the device from my mobile then work properly and then again the device reset fault is same and i am again reconfigure the device. i don't know where is problem. so please help me
You are using NodeMCU or ESP01?
@@TechStudyCell esp01
tq make this project like i pm on facebook
bro i have done all the steps clearly but when i press ESP8266 Blynk device buttons that i created which are OFF and ONN two button nothing happens...what could be the issue. it doesnot turn the state of button to ONN . it stays OFF
You find any solution? Can you tell what is the solution for that ?
Bro do vidoe using only node mcu module
For this project you can use either NodeMCU or ESP01. Shown all the steps. Please watch complete video.
Make video for 4 channel relay
Good work I have made the same but after some time it starts searching for wifi again
Please use a stable wifi connection.
Did u faced same problem like unable to search nodemcu in my wifi section ?
@@SHIVKUMAR-jv2zu no
Hello sir ek programming phone se bhi karke bata do mere pass computer laptop kuchh nahin hai kaun se usse programming karke bata do 1
Sir can you please upload the code to control 4 loads ...please sir
Sir esp32 rf remote blynk dht11 circuit
please code program switch for esp01
not button
@@sayaorang6437 see old video . and study code. little bit changed . through old video code
I am getting "BlynkEdgent.h" :No such file directory error message...Any solution?
Same bro, did you figure it out? Please help me
can i buy this circuite ?
Só nice vídeo
Thanks
Your project is not working properly
sir please help me programing error
Sir can u attach code in comment section
iffftt Google assistant V2 what
Felicidades podrias acerlo en España
he just do the code copy paste ........ u should explain the code because main thing is the code
Sir mera ifttt work nahi kr rha h
Google assistant me device add krne bol rha h
أهلاً وسهلاً ومرحباً -مشكور-لا أعلم -يتعذررالاشتراك ولا يوجد جرس -يتعذر الاستجابة لطلباتك -يتعذر مشركة الأصدقاء-مشكور-مشكور- أهلاً وسهلاً ومرحباً - أهلاً وسهلاً ومرحباً .
Please help
On what?
:)
You have to improve your english pronunciation and talk slower. Not everyone is easy with the Indian accent
sinric pro is better
It depends.