Hey would you use this or the 2 inch blam driver for the 165rs? The included holder in 2 looks nice to have for installation. Im in uk too wouldnyou have link to these pods
It depends on the car audio set up.. There are cases where you can use the 2 inch to act as Wide range Speakers The Blam Relax doesn't have a 2 inch.. Unlike the Blam Live has the LRF52 which is one of good speakers that we will recommend
If i have a 5channel amp running active on my Relax component speakers, where do i connect that 3” mid range speaker? I dont have a DPS. Just a normal 5ch set up…
Yeah, im using channel 1-2 for tweeters and 3-4 for the midbass. Channel 5 is for my sub. But if i add this 3” speakers, can I parallel it to the mid bass?
watched the video twice to get the most out of it. i have one or two questions, if you could please help me: i have plenty of space in my car and will work with a 9 channel dsp. my build will be 3 way. i am between relax, live and audison voce. and i am talking here 20cm 3 way... 20cm midrange active, 80mm LM80 or R80 if i go with relax, and the tweeter. is audison clearer, better?
The Audison Voce tweeter is a bit more laid back sounding, some of our customers love it. You have to listen to it for yourself between the Blam Vs Audison. Its a matter of personal choice.
Hey would you use this or the 2 inch blam driver for the 165rs? The included holder in 2 looks nice to have for installation. Im in uk too wouldnyou have link to these pods
It depends on the car audio set up..
There are cases where you can use the 2 inch to act as Wide range Speakers
The Blam Relax doesn't have a 2 inch.. Unlike the Blam Live has the LRF52 which is one of good speakers that we will recommend
Do tweeters need to connect to dsp if the component set comes with crossover?
if connect directly to the dsp.. that is active set up.. Hence.. must take precaution on the frequency range on the DSP
If i have a 5channel amp running active on my Relax component speakers, where do i connect that 3” mid range speaker?
I dont have a DPS. Just a normal 5ch set up…
5 Channel amp are usually meant for 4 channel for speakers and 5th is for the subwoofer
Yeah, im using channel 1-2 for tweeters and 3-4 for the midbass.
Channel 5 is for my sub.
But if i add this 3” speakers, can I parallel it to the mid bass?
One doubt... When my system has an audio processor (DSP) should I “always” stop using physical crossovers?
Advisable to go as Active to unleash the potential of these speakers
watched the video twice to get the most out of it. i have one or two questions, if you could please help me:
i have plenty of space in my car and will work with a 9 channel dsp.
my build will be 3 way.
i am between relax, live and audison voce.
and i am talking here 20cm 3 way...
20cm midrange active, 80mm LM80 or R80 if i go with relax, and the tweeter.
is audison clearer, better?
The Audison Voce tweeter is a bit more laid back sounding, some of our customers love it. You have to listen to it for yourself between the Blam Vs Audison. Its a matter of personal choice.
6 channel is for 3 pairs of speakers so if we add an underseat we need 8 channel dsp?
as long it's 6 channel high and 8 channel low.. you don't need amplification for 7th and 8th channel
@@petescaraudioaccessories673 How about if my setup is 3 way active but with a passive sub + mono amp ? Is 6 ch enough?
more than enough@@ky_frank4992
Ganti speaker, tambah DSP dan underseat sub viod warranty tak?
tak void warranty jikalau semuanya Plug and play dan tidak memotong wayar original
Relax R80 - Impedance 3 Ω , Relax 165 RS Impedance 2 Ω MY Current DSP AMP is 4 Ohm 25 W RMS X 8 ( Alpine PXE-R600 ) Can i install is my car ?
It can be installed.. no issues