Shouldn't even wear it in contact with skin. Over time the sweat will activate the copper oxides in the stone and cause issues leading up to toxic shock. Edit and disclaimer: as said by Abhiwan, real malachite is toxic, however, @Patrick Adair Designs is using something called TruStone which is a body-safe resin made with minerals and dyes to emulate the look of real semi-precious stones (like malachite). You would be safe to wear the ring he makes here.
I need to get the dexterity this guy has. Really blew my mind when he put the gold foil into the groove without something so little as a twitch of the finger.
its malachite trustone, they grind up, and reconstitute real malachite, so it's technically real malachite, just processed with additives. think of it like the 23K gold of malachite
Really wanna experiment with true stone now :D Would really love to see a black granite/marble/stone-countertop material ring with a rose-gold inlay and a rose-gold inside :D I'm mentally picturing something akin to the Ember ring in terms of design (but obviously with rose gold rather than crushed stone) with the chamfered edges, or even the Frostbite ring with the hammered edges (that would look pretty badass :D of the two I'd love to see the hammered edges in the stone rather than chamfer xD)
This is one of the prettiest rings I've ever seen, this is the exact shade and blend of colors I enjoy. I sadly have no use for a ring though :( but perhaps one day I will and then it can be something as stunning as this. Really beautiful ring. I'm not one to wear pendants or anything as I have super sensitive skin.
@@piplup10203854 Gold and platinum are hypoallergenic, so I doubt you'd have a reaction. If you're really that sensitive though, you should go with platinum. Gold is too soft to use in jewelry on its own, so its always mixed with copper to create the karats. Most platinum out there is 95% pure platinum because it's harder than gold. It's also heavier. Also, when gold is scratched, it loses a bit of material, but when platinum is scratched, the metal is just displaced. Neither metal can be dissolved in a single acid either. There's a few little facts.
@@Shock_Treatment Oh that is good to know! The last time I wore something was a tungsten ring and I had a severe allergic reaction to it that I couldn't wear it anymore. I'll look into Gold or Platinum. Thanks for letting me know, I'll go with the Platinum on the safe side.
This is awesome. I’m so glad I found this channel. Y’all’s creativity and craftsmanship are awe-inspiring. I am an auto body tech and there’s a lot of analogous elements in our trades, I really want to start ring making ☺️
Patrick my boy, come back! Always be in the videos! Also please make a video about how to take care of exotic rings, does and doesn't so our rings last a life time!
I always love seeing these videos hit my sub box. I watch them with my mother; she does some small time jewelry work of her own, and the PAD team serves as a constant source of inspiration. She actually has a question about this build, too - what epoxy was used in the build? Was it the Astro Tech epoxy that y'all sell, or something different?
Its been a while since I last watched one of your videos. You have been such a big source of inspiration for me and Im really glad to see how your video have improved too. Keep it up1!
Wow, I'm happy that I decided to click this video. I've been a subscriber for a long time and stopped for a while when u got a new voice over guy with this exact thought of coming back after some time when he has gotten the hang of it more sense I did like his voice. Obviously I am not sure if this is the same guy but I feel like he is and he has improved so much and I am so happy and proud. I love him doing the voice overs now. Good work, keep it up!
I just love your work, i actually just made my first ring from your website last night, 'raw earth', i also added amazonite to it cuz i thought the teal would be cool with the purple and bronze colors of amethyst and copper. I remember watching my first video from you, the original 'obsidian' titanium superconductor ring. It's just so cool to watch
I unsubscribed about a year ago because I wasn't that interested, but looking back right now I know how dumb a decision that was lol. Man this guy is so skilled. I wanna buy one of His rings when I get older and use it for my ring finger when i get married, because I want a unique ring, not those white, gold, silver plain rings.
When I get enough cash I'll be requesting from this guy to make me a real opal and meteorite rock ring Two of my favourite materials I'd say Both unique and gorgeous.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Wishing I had money so I could have an "I'll take your entire stock." moment. Beautiful, as always.
Never knew that true stone material existed. Kinda want some now.
I have never been able to find anyone selling a piece big enough to make anything with
Check out Maker Material Supply! They've got loads!
it's like 15 bucks for a blank
@@easttenncoinworks I would like to thanks, I discovered a beautiful place
@@lolix7002 Of course! Fast shipping too👍🏼
Just for reference for people, RAW malachite is toxic to humans. Jewelry is fine but do NOT mix raw malachite with water or inhale the dust
So snort it and make tea with it?
@@notsure1350 only after cooking it so it isn't raw anymore
Shouldn't even wear it in contact with skin. Over time the sweat will activate the copper oxides in the stone and cause issues leading up to toxic shock.
Edit and disclaimer: as said by Abhiwan, real malachite is toxic, however, @Patrick Adair Designs is using something called TruStone which is a body-safe resin made with minerals and dyes to emulate the look of real semi-precious stones (like malachite). You would be safe to wear the ring he makes here.
Orcs mine this stuff :) They can be near it
@@12OunceProphet lmao
Green and gold together is 🔥🔥
I had a malachite ring I got when I visited Israel in 1996 and I've loved it ever since. This is stunning and stunning work.
I need to get the dexterity this guy has. Really blew my mind when he put the gold foil into the groove without something so little as a twitch of the finger.
This was a really good return to form for the vids. Hope to see more of them.
Malachite is such a gorgeous material. You work it well ❤️
It's apparently man made fake malachite...
The rings and videos you make are always super High quality Keep it up
Ive never seen malachite in long flat layers like that. That looks lore like epoxy than malachite to me.
its malachite trustone, they grind up, and reconstitute real malachite, so it's technically real malachite, just processed with additives. think of it like the 23K gold of malachite
They look so beautiful.
What is true stone? Like powered rock and epoxy?
I kind of want to make a wooden pendant like that now....it'd look amazing with a dark mahogany and copper inlay or something like that.
Just bought me the pendant! Can’t wait to wear it!!
I just bought 2 gold burl rings, and I regret not getting a malachite ring so much! They are so beautiful!
Wow realy cool and sophisticate... 👏👏👏
Nice cool new material can it be done from a sheet of synthetic ruby and a platinum liner
Really wanna experiment with true stone now :D
Would really love to see a black granite/marble/stone-countertop material ring with a rose-gold inlay and a rose-gold inside :D
I'm mentally picturing something akin to the Ember ring in terms of design (but obviously with rose gold rather than crushed stone) with the chamfered edges, or even the Frostbite ring with the hammered edges (that would look pretty badass :D of the two I'd love to see the hammered edges in the stone rather than chamfer xD)
Your rings are so beautiful! I wish I could afford them😬
Same.
Save some money
@@StraightLineCo it’s a work in progress
how much do they cost 🤨
@@yanaigumnoff924 it depends some are around 300$ and other goes all the way to 3000$
Any updates on when the different tungsten rings will be available for purchase?
This is one of the prettiest rings I've ever seen, this is the exact shade and blend of colors I enjoy. I sadly have no use for a ring though :( but perhaps one day I will and then it can be something as stunning as this. Really beautiful ring. I'm not one to wear pendants or anything as I have super sensitive skin.
Even gold?
@@handryantan I have avoided any jewelry since I had a severe allergic reaction so I don’t know honestly. It might be fine but I don’t know.
@@piplup10203854 Gold and platinum are hypoallergenic, so I doubt you'd have a reaction. If you're really that sensitive though, you should go with platinum. Gold is too soft to use in jewelry on its own, so its always mixed with copper to create the karats. Most platinum out there is 95% pure platinum because it's harder than gold. It's also heavier. Also, when gold is scratched, it loses a bit of material, but when platinum is scratched, the metal is just displaced. Neither metal can be dissolved in a single acid either. There's a few little facts.
@@Shock_Treatment Oh that is good to know! The last time I wore something was a tungsten ring and I had a severe allergic reaction to it that I couldn't wear it anymore. I'll look into Gold or Platinum. Thanks for letting me know, I'll go with the Platinum on the safe side.
This is awesome. I’m so glad I found this channel. Y’all’s creativity and craftsmanship are awe-inspiring.
I am an auto body tech and there’s a lot of analogous elements in our trades, I really want to start ring making ☺️
I flippin' LOVE malachite!
this is probably the coolest ring ive ever seen
Isn't Malachite and water toxic? Is there a coating over it the finished pieces?
Where do you purchase the malachite from? I would like to buy some, to use for inlays in my guitars that I build.
Patrick my boy, come back! Always be in the videos!
Also please make a video about how to take care of exotic rings, does and doesn't so our rings last a life time!
Have you made anything out of jade before? I wonder what a jade ring would be like
Wow such a beautiful blockkk of malachite
I always love seeing these videos hit my sub box. I watch them with my mother; she does some small time jewelry work of her own, and the PAD team serves as a constant source of inspiration.
She actually has a question about this build, too - what epoxy was used in the build? Was it the Astro Tech epoxy that y'all sell, or something different?
Hey have you worked with jade before? You should make a video with it.
Beautiful work
From
Great Britain
Wow, Its a masterpice
Its been a while since I last watched one of your videos. You have been such a big source of inspiration for me and Im really glad to see how your video have improved too. Keep it up1!
Beautiful
looks great
Thanks!
Fantastic!!
Really gorgeous!! Perfekt match, perfect work! Brilliant! But what's with the silver Necklace and Bail at the pendant, tho?
The true stone would look awesome as those fancy counters in kitchens, amazing work dude, this ring looks awesome
Damn, that looks sick as hell...
Awesome 💯💯💯
Wow, I'm happy that I decided to click this video. I've been a subscriber for a long time and stopped for a while when u got a new voice over guy with this exact thought of coming back after some time when he has gotten the hang of it more sense I did like his voice. Obviously I am not sure if this is the same guy but I feel like he is and he has improved so much and I am so happy and proud. I love him doing the voice overs now. Good work, keep it up!
Same
I just love your work, i actually just made my first ring from your website last night, 'raw earth', i also added amazonite to it cuz i thought the teal would be cool with the purple and bronze colors of amethyst and copper. I remember watching my first video from you, the original 'obsidian' titanium superconductor ring. It's just so cool to watch
IN
*wait for it*
credible.......incredible!
Can make a ring with the fortify magicka enchantment?
Hey your rings are... you know there is no word to describe how amazing they are.
Do you charge different amounts for different materials.
Amazing Ring👍👍
I would love to see a reverse version of this. A lightly more toned down version primarily in gold, but with a colorful inner ring.
Wow cool😲😎✌️ interesting style 😎
Man this ring in particular is astounding 💚🧡 I wish I could afford it😭
Wow amazing work
Nice
ware can I buy blocks of Malachite ? great looking ring
Nice work
Those are beautiful!!
That green bit of rock reminds me of Glass Armour in Skyrim
Absolutely incredible
Это очень красиво, вы делаете невероятные вещи!
Do u think a stone ring like this will break easy without the metal? I was gonna try ruby
So shiny and amazing
Looks sick
What about a more gold ring with a highlight of Malachite?
I'm picturing similar to racing stripe along the bonnet/roof of a car etc
I think it would be such a cool twist to do this in reverse have the gold showing and malachite on the inside 😮
Is that gold inlay bits from the shaving off the gold ring in this video??
Isnt malachite severely poisonous?
ahhh that grip into the lathe though,
So nice! Can you do this with lapis?
Is it possible to make the gold little bit bigger and then get it rly cold and fit it in?
Hey Brother, awesome video! What Lathe is that?
I like the way you work 😊😍, greetings from Indonesia 🙏🙏
Bought my lathe finally, so excited to start making rings!
Would it be possible to tap the gold and true stone malachite, so that they would screw together?
Hey! May I ask what you are doing with the scrap malachite? I would be super interested in it! Thanks!
Bro your eyes is looking so beautiful ☺️ ✨
Nice got a sub. WHere could one get big slabs of trustone?
I love Malachite.
Дуже гарна каблучка. Не розумію, це справжній малахіт? Камінь? Момент обробки на токарному станку 7:05, схоже що це не камінь, а смола 🙄
Would look great on my warlock build
Where can you buy this type of material but in different colors?
Sem dúvida são peças maravilhosas, mas e o material esperdiçáveis também é grande. O que fazem com as sobras ou farpas?
Love malachite, would it be feasible to create a malachite only ring?
Ring is gorgeous but is sticking your whole hand with a glove into the lathe safe?
What do you do with the shavings?
Could you put a link in the description?
Dear friend, where I can find the stone a slab, because I'm watching to bye but is hard to find
I need a ring like this
I unsubscribed about a year ago because I wasn't that interested, but looking back right now I know how dumb a decision that was lol. Man this guy is so skilled. I wanna buy one of His rings when I get older and use it for my ring finger when i get married, because I want a unique ring, not those white, gold, silver plain rings.
When I get enough cash
I'll be requesting from this guy to make me a real opal and meteorite rock ring
Two of my favourite materials I'd say
Both unique and gorgeous.
Where to get the gold ring blanks? Or is it casted?
It’s gorgeous ❤️
Nice 👍👍👍💯
When do you use think glue vs medium glue?
nice nice!!
Great orc forge
Ahh almost classic Patrick Vid.
Muito bonito beautiful
Is any shop in London
I grew up in a town that used to mine copper, so the high school’s yearbook is called Malachite.
Should have done the gold leaf band on the ring
Is that available with rose gold instead of the gold shown?
Definitely! Just send us an email :)