Can't tell you how long I was looking for this information. Beyond frustrating when a screen "lifts" up from the frame after a tedious repair. Awesome and well-explained. Thank you for making this video!
Do yoiu know if a mask with a filter needed? Looks like he did ok without needing one in this vid? Can you answer this, please? I'm worried about burns, or eye irrittion, or skin irritation. I will be using nitrile gloves. I purchased a mask with a filter, but I can't wear a mask all night while I sleep. My "store" / work area, is also my studio apartment.
I’m getting ready to apply a Carbon Fiber overlay in my FRS and it came with a Primer and I was so confused how this worked with double sided tape and this video really helped me out. Thanks again great video !!
Thank you so much for sharing, after watching video after video, of people babbling a whole bunch of jargon, your video was the very best explanation/demonstration on what and how to use adhesion promoter. Ironically, this information in your video will help me install side skirts to my Abarth 595. Thanks again!
Profixerr, is a mask with a filter needed? Looks like you did ok without needing one in this vid? Can you answer this, please? I'm worried about burns, or eye irrittion, or skin irritation. I will be using nitrile gloves. I purchased a mask with a filter, but I can't wear a mask all night while I sleep. My "store" / work area, is also my studio apartment where I also sleep.
Two questions you didn’t cover about. Do you apply the primer on the edges of the screen too? Do your only apply the primer on the chasis of the ipad and not the plastics like how you were avoiding?
You can apply it anywhere adhesive would touch I had already applied it on the plastic area To add it to the screen itself, you’d have to remove the original adhesive. We don’t find that it helps to remove the adhesive and apply primer since it takes so much time. The main area you’ll see an iPad fail is on the frame and adhesive and not the screen and adhesive
Help. I have a pre primered abs bumper from ebay and the primer that is on there i dont trust and its not fully covering everything. Can i sand it down some and still spray adhesion promoter on there and then primer? Thanks
I do a family iPad/iPhone repair about every 2-3 years .. buying one of these products is not worth it for the use I'd get. So, what's a primer for an every now and then fix it guy? Such as dilute some contact cement, a tube of XXX thinned with acetone, a can of spray adhesive puddled then Q-tipped on, some model airplane dope ... suggestions? ... or better to just clean parts good of old adhesive then apply new adhesive strips and call it done. - Thanks for the videos they are very clear and detailed with attention to quality repairs.
Aliexpress has a ton of small bottles of primer that are cheap and can come with free shipping if buying enough stuff. It's probably too late to be of any good (I suppose I'm just leaving this for anyone reading.)
I used your link and the pages wont load, try to search and took 5 min. I have good internet and tried a different site and it worked fine. So not sure. But was very annoying to use.
Hi I have use primer for applying car accessories with 3m tap on car paint now some area of paint show yellow stain due to excess primer how to remove safely ?
Can't tell you how long I was looking for this information. Beyond frustrating when a screen "lifts" up from the frame after a tedious repair. Awesome and well-explained. Thank you for making this video!
Do yoiu know if a mask with a filter needed? Looks like he did ok without needing one in this vid? Can you answer this, please? I'm worried about burns, or eye irrittion, or skin irritation. I will be using nitrile gloves. I purchased a mask with a filter, but I can't wear a mask all night while I sleep. My "store" / work area, is also my studio apartment.
I’m getting ready to apply a Carbon Fiber overlay in my FRS and it came with a Primer and I was so confused how this worked with double sided tape and this video really helped me out. Thanks again great video !!
Thank you so much for sharing, after watching video after video, of people babbling a whole bunch of jargon, your video was the very best explanation/demonstration on what and how to use adhesion promoter. Ironically, this information in your video will help me install side skirts to my Abarth 595. Thanks again!
Profixerr, is a mask with a filter needed? Looks like you did ok without needing one in this vid? Can you answer this, please? I'm worried about burns, or eye irrittion, or skin irritation. I will be using nitrile gloves. I purchased a mask with a filter, but I can't wear a mask all night while I sleep. My "store" / work area, is also my studio apartment where I also sleep.
I'm using the TESA primer on a vehicle surface. If I go beyond the adhesive area, can it be cleaned up with isopropyl alcohol?
Fiyah! Thank you for the amazing review ProFixerr!
Youre welcome! Youre my favies:)
Can this work on rubber/silicone?
We let it dry for how long?
And can we use liquid glue like E7000, or it'll only work with tape adhesive
Thanks for this. Kept having issues with iPads opening. Trying out TESA for the first time and seeing how it goes.
Same here! Did it worked?
Hey! For how long can/should the primer be on the bezel before putting the screen on?
Can I use it for glass as a pre-treating before printing on it.
If I'm using 300LSE tape on low surface energy plastics do I need to use primer too?
No, if your application purpose is to stick it on LSE materials, having a LSE tape should be sufficient.
Two questions you didn’t cover about.
Do you apply the primer on the edges of the screen too?
Do your only apply the primer on the chasis of the ipad and not the plastics like how you were avoiding?
You can apply it anywhere adhesive would touch
I had already applied it on the plastic area
To add it to the screen itself, you’d have to remove the original adhesive. We don’t find that it helps to remove the adhesive and apply primer since it takes so much time.
The main area you’ll see an iPad fail is on the frame and adhesive and not the screen and adhesive
how long does it take to dry ?
Help. I have a pre primered abs bumper from ebay and the primer that is on there i dont trust and its not fully covering everything. Can i sand it down some and still spray adhesion promoter on there and then primer? Thanks
Where can we buy the Tesa Primer ?
So which one is better?
3m 94 - it is the best on market
So, which one is the best?
I prefer Tesa more than 3m
did anyone notice his hair may have 3m primer used in it cuz it doesn't move
I do a family iPad/iPhone repair about every 2-3 years .. buying one of these products is not worth it for the use I'd get. So, what's a primer for an every now and then fix it guy? Such as dilute some contact cement, a tube of XXX thinned with acetone, a can of spray adhesive puddled then Q-tipped on, some model airplane dope ... suggestions? ... or better to just clean parts good of old adhesive then apply new adhesive strips and call it done. - Thanks for the videos they are very clear and detailed with attention to quality repairs.
Aliexpress has a ton of small bottles of primer that are cheap and can come with free shipping if buying enough stuff. It's probably too late to be of any good (I suppose I'm just leaving this for anyone reading.)
does it have to stored in metal or glass can? can plastic bottle be used?
WHERE CAN YOU GET TESA PRIMER????
Which Is The Right One For Adhesions And Adhesive To Mix With?
I used your link and the pages wont load, try to search and took 5 min. I have good internet and tried a different site and it worked fine. So not sure. But was very annoying to use.
Hi I have use primer for applying car accessories with 3m tap on car paint now some area of paint show yellow stain due to excess primer how to remove safely ?
Polish or compound
tHERE IS NO DESCRIPTION LINKS
Nice video!
Thanks
We offer similar products, but we are in Shanghai, China.
Why is 3M "Infamous?" Def ~ "wicked; abominable."
cool
Bill gates! Watch out for this guy
Can’t believe how slow injured gadgets is. So bad I left. Terrible slow
How are they slow? We use them for everything basically