Well I'll be, of all the years of running my torch I didn't know you could get a rebuild kit for them ! 😞 I threw one away a long time ago because I didn't trust it, I could have rebuilt it ! At least I did keep the gauges ! Thanks for sharing and take care. 👍
Wanted to rebuilt mind, it just broke yesterday. I looked at your video last night and figured I could do it. I called the company that sells Victor Parts, I have model 250-80-540 a Victor Medalist Oxy regulator. Was told they do not deal with the public, but let me give you the part number for the part you need plus the part number for a complete rebuild if you so desire, thanks. I call the closest dealer (Arc3 Gasses FREDERICKSBURG, VA) as found on the ESAB web site. They tell me...sorry we dont sell parts to the public as you have to have 2 Million Dollars liability, we have a guy that can rebuild it for you, but it will probably be cheaper to just buy a new one...WTH? Great service, thanks, I will go into Harbor Freight tomorrow and and buy a $70 Olsen!
Hey Frank Victor makes good stuff. Well worth what they cost. I have a set of 50 year old MECO (Modern Engineering Co) made in St Louis, Mo that was given to years ago. I had the same type of line pressure creep that you had on the oxygen regulator. The MECO regulators are a multi-seat design Soto repair that problem you take the back cap off the regulator and remove one screw to rotate the seat block to a new seat surface. Each block has 4 seats on it before it needs replaced. MECO came only with that design in 1922 or so. They were bought out by Victor/ESAB in the 90’s.
Seal Seat carries parts for many old torches and regulators including Meco. www.sealseat.com/ Tip adapters are available for Meco. I have a couple of these: www.atlweldingsupply.com/collections/cutting-tips/cutting-tip-adaptors Check out Weldingweb. I collect and rebuild torches and regulators and learned a lot there. weldingweb.com/forumdisplay.php?2-MIG-TIG-Stick-And-Oxy-Fuel-Welding
I realize this is a bit dated and that you probably already figured it out, but if i am reading your regulator's Mod No. correctly, I believe the C at the end indicates it is rated for 80 PSIG output. So your relief valve is acting appropriately. Thanks for the video, John
Elite Earthworks LLC cool!!! No not too far away, thank you, I hope to keep some good stuff going. Good to see another owner op on here, I’ll check some of your vids when I get some time.
Good video. I've rebuilt many regulators because it's a great way to save money and downtime. WARNING! When working with OXYGEN regulators use acetone and NOTHING else or different to clean them. Study cleaning to "oxygen safe" standards. It ain't hard but high pressure (the cylinder pressure before the regulator steps it down) oxygen can burn things like metal most people don't consider flammable. I grind the chamfer off my seat socket so it engages the nut flats fully. Those chamfers exist to center the broach which cuts the internal flats of the socket and they are not necessary or useful from an end user standpoint.
@@anthonyskorner4511 For cleaning only. It has a high vapor pressure and evaporates quickly. Women use it as nail polish remover. A strong solvent but highly flamable.
I've got a couple old victor regulators sitting on the shelf in the garage. Ill have to check them out! Ive been running victors new style for a few years now
Good video. I think the kit was missing the large white plastic seal that was under the main body. I've rebuilt a few different regulators and if I remember correctly the kits all came with new seals. Also if someone isn't comfortable rebuilding their own regulators Victor used to offer a rebuilding service for a fair price. Yes, clean and oil free is important, water soluble soap, a good rinse and dry air will do.
Those guys from the show "Moonshiners" don't use a rebuild kit. They use oatmeal and water. I'm getting mixed messages from all the dudes that I look up too...... The answer must be somewhere in the middle. Great video my friend. You continue to impress.......is McGyver kin to you?
Lol!!! All I know about oatmeal is there is fast acting and regular, sorry I’m not much help on that subject!!! MacGyver used to hang out sometimes maybe I picked up a few pointers! Thanks Doug!
Great instructional video. All steps and procedures were spot on 5 star all the way. In my opinion with the 2000-2500 psi coming into the high pressure side safety first. Please next time you open the bottle valve step to the side so that you are not in front of the pressure or flying parts if something went wrong. I trust your work all the way and I am not trying to be a safety nazi or a critic. I don't want to have to bring a bible the first time I meet your family.
tdej80 Lol! I did step to the side the first time I opened it, just didn't include ducking beside it in the video! Good advise for sure, thanks for watching!
Digginok I almost did not post that comment because I second guessed that the first time you opened that bottle was not on camera and that you were not in front of it. I apologize for selling your common sense and intelligence short in the comment section. Forgive me brother! Thanks for posting 2 times in the last week.
tdej80 Hey no problem brother, I know you have mine and anyone who watches best interest in mind..I should have pointed that out, that is just something I don't think to put on the video, just a habit I have to duck beside the bottles when I open them up.
Digginok thanks for your understanding and not taking my comment personal. When I say things like that many people get mad at me, but you truly know how my mind works. A while back I had to attend a stored energy safety training. That was the best hour I have spent in a long time. It made me think about a lot of things that I take for granted where I work at we do have a very EH&S woman. I am glad the company pays what it cost to keep her around. She can be a little bit of a pain in the butt at times but she truly cares about people.
Thank you for posting this vid, My oxygen reg just went creeping with the last tank I put it on...:-{ & I needed to take it apart & see what the problem is, but didn't know if I would be in a huge mess if I opened it up... I tried your link to the repair manual, but it comes up with an error page, could you please repost it?
Probably for the best, I just hate to throw away something that’s still good. Rebuilding things used to be the normal, now just toss it in the landfill and buy a new one made in China. You do you, I’ll keep using the torch I bought 30 plus years ago.
jaysen2200 says the guy with the skull and cross bones! Lol you do it your way, and I’ll do it mine. If ya rinse well the soap is gone. Mine hasn’t exploded yet, have you ever rebuilt one?
Well I'll be, of all the years of running my torch I didn't know you could get a rebuild kit for them ! 😞
I threw one away a long time ago because I didn't trust it, I could have rebuilt it ! At least I did keep the gauges !
Thanks for sharing and take care. 👍
Wanted to rebuilt mind, it just broke yesterday. I looked at your video last night and figured I could do it. I called the company that sells Victor Parts, I have model 250-80-540 a Victor Medalist Oxy regulator. Was told they do not deal with the public, but let me give you the part number for the part you need plus the part number for a complete rebuild if you so desire, thanks. I call the closest dealer (Arc3 Gasses
FREDERICKSBURG, VA) as found on the ESAB web site. They tell me...sorry we dont sell parts to the public as you have to have 2 Million Dollars liability, we have a guy that can rebuild it for you, but it will probably be cheaper to just buy a new one...WTH? Great service, thanks, I will go into Harbor Freight tomorrow and and buy a $70 Olsen!
Try eBay or Amazon. They sell them
Hey Frank
Victor makes good stuff. Well worth what they cost. I have a set of 50 year old MECO (Modern Engineering Co) made in St Louis, Mo that was given to years ago. I had the same type of line pressure creep that you had on the oxygen regulator. The MECO regulators are a multi-seat design Soto repair that problem you take the back cap off the regulator and remove one screw to rotate the seat block to a new seat surface. Each block has 4 seats on it before it needs replaced. MECO came only with that design in 1922 or so. They were bought out by Victor/ESAB in the 90’s.
Seal Seat carries parts for many old torches and regulators including Meco. www.sealseat.com/
Tip adapters are available for Meco. I have a couple of these:
www.atlweldingsupply.com/collections/cutting-tips/cutting-tip-adaptors
Check out Weldingweb. I collect and rebuild torches and regulators and learned a lot there.
weldingweb.com/forumdisplay.php?2-MIG-TIG-Stick-And-Oxy-Fuel-Welding
I realize this is a bit dated and that you probably already figured it out, but if i am reading your regulator's Mod No. correctly, I believe the C at the end indicates it is rated for 80 PSIG output. So your relief valve is acting appropriately.
Thanks for the video, John
Just found your channel, great stuff! I’m an owner operator as well located in Joplin Missouri so we’re not to far away. Great content!
Elite Earthworks LLC cool!!! No not too far away, thank you, I hope to keep some good stuff going. Good to see another owner op on here, I’ll check some of your vids when I get some time.
Digginok awesome sounds great! I agree it’s always neat to see how other small companies do it! Thanks for the reply
You’re welcome!
Good video. I've rebuilt many regulators because it's a great way to save money and downtime.
WARNING! When working with OXYGEN regulators use acetone and NOTHING else or different to clean them. Study cleaning to "oxygen safe" standards. It ain't hard but high pressure (the cylinder pressure before the regulator steps it down) oxygen can burn things like metal most people don't consider flammable.
I grind the chamfer off my seat socket so it engages the nut flats fully. Those chamfers exist to center the broach which cuts the internal flats of the socket and they are not necessary or useful from an end user standpoint.
Why use acetone if it's extremely flammable?
@@anthonyskorner4511 For cleaning only. It has a high vapor pressure and evaporates quickly. Women use it as nail polish remover. A strong solvent but highly flamable.
I've got a couple old victor regulators sitting on the shelf in the garage. Ill have to check them out! Ive been running victors new style for a few years now
Pretty simple fix, back in business
Good video. I think the kit was missing the large white plastic seal that was under the main body. I've rebuilt a few different regulators and if I remember correctly the kits all came with new seals. Also if someone isn't comfortable rebuilding their own regulators Victor used to offer a rebuilding service for a fair price. Yes, clean and oil free is important, water soluble soap, a good rinse and dry air will do.
Jim Zivny Thank you, I thought the same on the washers too, The last kit I bought had them included, this one didn't have them listed though.
Those guys from the show "Moonshiners" don't use a rebuild kit. They use oatmeal and water. I'm getting mixed messages from all the dudes that I look up too...... The answer must be somewhere in the middle. Great video my friend. You continue to impress.......is McGyver kin to you?
Lol!!! All I know about oatmeal is there is fast acting and regular, sorry I’m not much help on that subject!!! MacGyver used to hang out sometimes maybe I picked up a few pointers! Thanks Doug!
Great instructional video. All steps and procedures were spot on 5 star all the way. In my opinion with the 2000-2500 psi coming into the high pressure side safety first. Please next time you open the bottle valve step to the side so that you are not in front of the pressure or flying parts if something went wrong. I trust your work all the way and I am not trying to be a safety nazi or a critic. I don't want to have to bring a bible the first time I meet your family.
tdej80 Lol! I did step to the side the first time I opened it, just didn't include ducking beside it in the video! Good advise for sure, thanks for watching!
Digginok I almost did not post that comment because I second guessed that the first time you opened that bottle was not on camera and that you were not in front of it. I apologize for selling your common sense and intelligence short in the comment section. Forgive me brother! Thanks for posting 2 times in the last week.
tdej80 Hey no problem brother, I know you have mine and anyone who watches best interest in mind..I should have pointed that out, that is just something I don't think to put on the video, just a habit I have to duck beside the bottles when I open them up.
Digginok thanks for your understanding and not taking my comment personal. When I say things like that many people get mad at me, but you truly know how my mind works. A while back I had to attend a stored energy safety training. That was the best hour I have spent in a long time. It made me think about a lot of things that I take for granted where I work at we do have a very EH&S woman. I am glad the company pays what it cost to keep her around. She can be a little bit of a pain in the butt at times but she truly cares about people.
I heard that little goat at the beginning of the test....kids are cool.
Mark Garcia my daughter raises them, the can be a lot of work!!!
They love to climb... right on the hood of my truck. Like a hail storm. Lol. I love em tho. I refuse to eat them and liberate all the ones I can. :)
I learned the hard way teflon tape can ignight oxygen.
Thank you for posting this vid, My oxygen reg just went creeping with the last tank I put it on...:-{ & I needed to take it apart & see what the problem is, but didn't know if I would be in a huge mess if I opened it up... I tried your link to the repair manual, but it comes up with an error page, could you please repost it?
Yeah I can’t get it to work either. I just googled victor regulator service manual. Not sure why it won’t work.
@@Digginok ; I've looked everywhere online, thanks for trying, I appreciate it....:-}
where can i order the repair kit
eBay or your local welding supply store.
100$ vs. a regulator blowing up and a driving all it pieces into me. and a 10k hospital bill.
ill buy the regulator.
Probably for the best, I just hate to throw away something that’s still good. Rebuilding things used to be the normal, now just toss it in the landfill and buy a new one made in China. You do you, I’ll keep using the torch I bought 30 plus years ago.
Probably a good video if one could hear it.
I think my regulator failed just about each of those tests LOL
Rubbing alcohol should clean it well.
perhaps better than "soap", which is a fatty product. But maybe just hot steam is better still.
Sir what happened to the video
Tuff F350 Not sure what happened seems to be up now.
link is obsolete
Go to eBay search for victor rebuild kit, search for your model number. It’s not that hard. Thanks for watching
@@Digginok Gotcha, I forgot to mention I have a Weldmark setup. That little red washer went bad in both
Needs to fix volume on video.
Yeah I can’t change it after it’s uploaded to UA-cam, I have been trying to improve
This video is plumb scary...
And why? lol
Soap is made from oil use alcohol
Is alcohol flammable? If so I’d recommend not using it. But what do I know? 🤔
Alcohol evaporates clean in no time nothing left behind don't be in a hurry and let it dry should be way safer
jaysen2200 says the guy with the skull and cross bones! Lol you do it your way, and I’ll do it mine. If ya rinse well the soap is gone. Mine hasn’t exploded yet, have you ever rebuilt one?
Yeah I have I'm a welder . Soap is one of the worst things you can put inside a regulator your lucky so far to not get exploded .
No hate man I don't mean to come off as a troll