Not your fault, but I believe the inconsistency of the information architecture--- you must speak fluent *iconease* in order to find the [-] scan button. LOL!
Thank you for an easy to follow tutorial that helped me get this setup. I did run into an issue that was causing me some issues. I use the SmartLife app and setup Tuya IOT like in this video. However, I kept getting the 2406 error. This was due to the region not matching my smart life app region. When you go into the Tuya IOT device tab (to setup SmartLife link to Tuya) make sure the correct region is selected. You will know if you have it correct by how many devices are connected. Hope this helps anyone that runs into the same issue. Great video!
I followed your steps and was winning…until… the very last part where you can’t copy the last code needed as they want as not you to now ‘verify your signature’ ? …and I have no idea how to do that lol
@@HomeSight it was on the same page where the password and ID are that you said to copy. It said that it now requires further verification to improve security and was introduced about a month ago.
At 4:32, under the "Link Tuya App Account" description, your screen says "Already added 1 account and 3 linked devices." I have three devices, two light strips by different brands from amazon and a garage door opener. My screen says "Already added 1 account and 0 linked devices." What is causing the IoT platform to not detect the devices in my Tuya app? I don't understand what I have done wrong.
Thank you for a great tutorial! Followed all the steps - everything works, but I can’t see any switches that are connected to Smart Life App in the Homebridge. The Homebridge log shows no faults or alarms…. Any tip would be very appreciated… thanks!
The A1 Pro Max lock was added to HomeKit, but it does not lock or unlock the door. The device was added, but it doesn't work. This might be because the lock requires a Bluetooth connection and only allows connections through the Smart Life app.
Any idea how I get notified if my tuya smoke detector is detecting smoke? By now only the app will trigger a notification but HomeKit doesn’t. It always says no smoke detected, while the alarm on the device is going
I am trying to add a dehumidifier. I can see the device in the cloud api, however no in the home bridge, As per I know this type of device is not full compatible, Is there a possibility?
Please everything is working well except some curtain wifi switch, i don’t see it in the home app And I can’t find the problem or a solution Please advise Thanks so much for the awesome guide
Great Video. Did everything as instructed. but in homebridge. The device is on Tuya IoT. But when I open Homebridge, in the command panel I get: Got 1 Device (so it is finding it ) than fetching etc, finally i get: [Tuya] Unsupported Device: Name of device (in brown). Can you help please
Got an email stating from TUYA "The service IoT Core you subscribed to will expire on 2024-08-28" and now I can't use homebrdige to connect to my lights. I have tried going through the tuya site to renew but I'm not sure what I need to do. Was it just a trial period? Do they offer a way to subscribe? I can't sing up as a developer... it said something like $25k
I have tryed to connect the Tuya app to my project and it does not show up in the project at all and no devices show up in the project at all and I followed all the steps that you did and it did not work at all so what do I have to do to get it to work the first time
I am getting this error, could you please help me Required `id` property is missing in device configuration, I received: { "device_type": "form" } thank you
Hi. Is your light and switch using Wifi protocol? I wonder will the homebridge integration works for devices/lights/switches using Bluetooth mesh and zigbee protocol via gateway/hub added in Tuya/smart life App?
following all steps i can add my device to tuya website but in homebridge i cannot see the accessories ...so in website I can see the accessories but in homebridge accessories tab nothing is there… any idea?
If I use this plugin would I be able to add all my devices to HomeKit, the current smartlife plugin I use not all my devices show up homekit which includes a power strip and a star projector
Maybe You know what schould I do?:-) [11/16/2022, 9:04:32 AM] [TuyaPlatform] Login failed. code=2406, msg=skill id invalid [11/16/2022, 9:04:32 AM] [TuyaPlatform] Please make sure you selected the right data center where your app account located, and the app account is linked with cloud project.
I did something like this once before but after a month Tuya wanted me to pay, is this the same or did I make a mistake last time I did it? Please confirm this process will not require payment. Thanks.
Great video. When trying to scan the qr code for Smart life app auth to says "you cannot scan the qr code to add a device deployed in another data center". Any help? Thanks
I'm guessing you had to ensure you had the correct region selected before you scanned the QR code, just for anyone else reading this. There is now a warning on the Tuya Platform website when it shows the QR code.
Signed up for the free trial here. No payment info was requested. The issue I’m having is that my Smart Socket shows up in HomeKit per the instructions, but the on/off button has no effect on the actual socket. Works fine from the Tuya Smart app itself.
@@HomeSight How so exceuse me? It's been one month after following the steps in this video and now the IoT Service expired and is asking to pay 25'000usd per year D:
Tuya wont let you unlink accounts but sends this error “The number of projects linked with this Tuya Smart App account has reached the upper limit of 2. Unlink the account from existing projects and try again.” But also if you look through their FAQ you’ll find “Note: Currently, deletion of cloud development projects is not supported, we will support it as soon as possible.”
I am getting an 1100 error which documentation says that the username or app schema parameter is empty but I checked the config file and it is not. Cannot get it to login.
TuyaLan No devices found. Need help Setup: wifi 2g - Light Bulb but my hoobs is connected to the 5g, Will it work? Tried to use the Tuya Platform and it works. Can someone help to make it work on Local Tuya? BTW Im using Hoobs
I live in thailand. I scan qr code by my mobile but error message "you cannot scan the qr code to add adevice deployed in another data center . how to resolve it?
@@HomeSight i've tried another email adress. now it works but after setting everything exactly like in your video i'll not have any devices. ob the tuya website are devices...
Glad you got the account working in the end. Why don’t you have any devices in there? The email used for the Tuya account and the smartlife/tuya app don’t need to be the same. They get “paired” by scanning the at QR code through the app.
Добрый вечер. подскажите, что я сделал не так. Не запускается плагин tuya. [1/31/2024, 9:16:29 PM] [HB Supervisor] Restarting Homebridge... [1/31/2024, 9:16:29 PM] [HB Supervisor] Starting Homebridge with extra flags: -I -P /var/lib/homebridge/node_modules --strict-plugin-resolution [1/31/2024, 9:16:29 PM] [HB Supervisor] Started Homebridge v1.7.0 with PID: 16197 [1/31/2024, 9:16:29 PM] Error: listen EADDRINUSE: address already in use :::51117 at Server.setupListenHandle [as _listen2] (node:net:1817:16) at listenInCluster (node:net:1865:12) at Server.listen (node:net:1953:7) at EventedHTTPServer.listen (/homebridge/node_modules/homebridge/node_modules/hap-nodejs/src/lib/util/eventedhttp.ts:164:20) at HAPServer.listen (/homebridge/node_modules/homebridge/node_modules/hap-nodejs/src/lib/HAPServer.ts:377:21) at Bridge. (/homebridge/node_modules/homebridge/node_modules/hap-nodejs/src/lib/Accessory.ts:1365:18) at step (/homebridge/node_modules/homebridge/node_modules/tslib/tslib.js:195:27) at Object.next (/homebridge/node_modules/homebridge/node_modules/tslib/tslib.js:176:57) at /homebridge/node_modules/homebridge/node_modules/tslib/tslib.js:169:75 at new Promise () [1/31/2024, 9:16:29 PM] Got SIGTERM, shutting down Homebridge... [1/31/2024, 9:16:31 PM] Homebridge requires Node.js version of ^18.15.0 || ^20.7.0 which does not satisfy the current Node.js version of v18.13.0. You may need to upgrade your installation of Node.js - see homebridge.io/w/JTKEF [1/31/2024, 9:16:31 PM] Loaded config.json with 0 accessories and 1 platforms. [1/31/2024, 9:16:31 PM] Loaded 0 cached accessories from cachedAccessories. [1/31/2024, 9:16:31 PM] --- [1/31/2024, 9:16:32 PM] Loaded plugin: homebridge-plugin-ewelink-cube@1.2.0 [1/31/2024, 9:16:32 PM] Registering platform 'homebridge-plugin-ewelink-cube.eWeLinkCUBEPlatform' [1/31/2024, 9:16:32 PM] --- [1/31/2024, 9:16:32 PM] [HB Supervisor] OS: Linux 4.4.302+ arm64 [1/31/2024, 9:16:32 PM] [HB Supervisor] Node.js v18.19.0 /opt/homebridge/bin/node [1/31/2024, 9:16:32 PM] [HB Supervisor] Homebridge Path: /var/lib/homebridge/node_modules/homebridge/bin/homebridge [1/31/2024, 9:16:32 PM] [HB Supervisor] UI Path: /opt/homebridge/lib/node_modules/homebridge-config-ui-x/dist/bin/standalone.js [1/31/2024, 9:16:32 PM] Loaded plugin: homebridge-tuya-platform@1.5.0 [1/31/2024, 9:16:32 PM] Registering platform 'homebridge-tuya-platform.TuyaPlatform' [1/31/2024, 9:16:32 PM] --- [1/31/2024, 9:16:32 PM] Loading 1 platforms... Setup Payload: X-HM://0023RXEGI17AK Enter this code with your HomeKit app on your iOS device to pair with Homebridge:
Good evening. tell me what I did wrong. The tuya plugin does not start. [1/31/2024, 9:20:52 PM] [HB Supervisor] Restarting Homebridge... [1/31/2024, 9:20:52 PM] [HB Supervisor] Starting Homebridge with extra flags: -I -P /var/lib/homebridge/node_modules --strict-plugin-resolution [1/31/2024, 9:20:52 PM] [HB Supervisor] Started Homebridge v1.7.0 with PID: 16483 [1/31/2024, 9:20:53 PM] Error: listen EADDRINUSE: address already in use :::51117 at Server.setupListenHandle [as _listen2] (node:net:1817:16) at listenInCluster (node:net:1865:12) at Server.listen (node:net:1953:7) at EventedHTTPServer.listen (/homebridge/node_modules/homebridge/node_modules/hap-nodejs/src/lib/util/eventedhttp.ts:164:20) at HAPServer.listen (/homebridge/node_modules/homebridge/node_modules/hap-nodejs/src/lib/HAPServer.ts:377:21) at Bridge. (/homebridge/node_modules/homebridge/node_modules/hap-nodejs/src/lib/Accessory.ts:1365:18) at step (/homebridge/node_modules/homebridge/node_modules/tslib/tslib.js:195:27) at Object.next (/homebridge/node_modules/homebridge/node_modules/tslib/tslib.js:176:57) at /homebridge/node_modules/homebridge/node_modules/tslib/tslib.js:169:75 at new Promise () [1/31/2024, 9:20:53 PM] Got SIGTERM, shutting down Homebridge... [1/31/2024, 9:20:55 PM] Homebridge requires Node.js version of ^18.15.0 || ^20.7.0 which does not satisfy the current Node.js version of v18.13.0. You may need to upgrade your installation of Node.js - see homebridge.io/w/JTKEF [1/31/2024, 9:20:55 PM] Loaded config.json with 0 accessories and 1 platforms. [1/31/2024, 9:20:55 PM] Loaded 0 cached accessories from cachedAccessories. [1/31/2024, 9:20:55 PM] --- [1/31/2024, 9:20:55 PM] Loaded plugin: homebridge-plugin-ewelink-cube@1.2.0 [1/31/2024, 9:20:55 PM] Registering platform 'homebridge-plugin-ewelink-cube.eWeLinkCUBEPlatform' [1/31/2024, 9:20:55 PM] --- [1/31/2024, 9:20:56 PM] [HB Supervisor] OS: Linux 4.4.302+ arm64 [1/31/2024, 9:20:56 PM] [HB Supervisor] Node.js v18.19.0 /opt/homebridge/bin/node [1/31/2024, 9:20:56 PM] [HB Supervisor] Homebridge Path: /var/lib/homebridge/node_modules/homebridge/bin/homebridge [1/31/2024, 9:20:56 PM] [HB Supervisor] UI Path: /opt/homebridge/lib/node_modules/homebridge-config-ui-x/dist/bin/standalone.js [1/31/2024, 9:20:56 PM] Loaded plugin: homebridge-tuya-platform@1.5.0 [1/31/2024, 9:20:56 PM] Registering platform 'homebridge-tuya-platform.TuyaPlatform' [1/31/2024, 9:20:56 PM] --- [1/31/2024, 9:20:56 PM] Loading 1 platforms... Setup Payload: X-HM://0023RXEGI17AK Enter this code with your HomeKit app on your iOS device to pair with Homebridge:
{SOLVED!} I follow all the step and all work but my device (work on smart life app) dont appear on homebridge.. how to solve it? My device appear on tuya IOT platform, all are on but the dont appear on homebridge (docker, synology) The problem com from the "Service API", all are good configure like the video but the web site dont allow my api, how to solve it?
@@leecummins9068 to fix it you need another account, the problem is when you generate purchase when you create project, the authorize api program not purchase good and its look all of the next step, so go on the page of the api products needed (smart home device management, authorasation, smart home family management and other..) and save the url of the product, create another account with another program like the vidéo but before auto purchase the « authorize api product » in configuration wizard, go to the url of the product and claim it all before, after all product are buy, go on the configuration wizard and add the authorize api product claim before, that’s what I make to solve the problem, I hope my solution helps you (sorry for the English I’m French) bye ✌🏻
@@FRKilian39 je n’ai pas tout compris à ta solution mais je dois avoir le même problème. Je veux bien ta solution en français. Idem je n’ai rien dans homebridge et bien suivi la vidéo. Merci.
I literally have a had WEEKS of mental break downs because i couldn't figure it out. I am so thankful for this video you're seriously a life saver!!!
Glad to help!!
Not your fault, but I believe the inconsistency of the information architecture--- you must speak fluent *iconease* in order to find the [-] scan button. LOL!
80% less steps than in other tutorials but YOUR tutorial works perfectly fine!
Amazing video! Thank you. No waffle, no faff... just clear instructions that got me to where I needed to be with the least time as I'm impatient.
I was so close but not there. Your video helped me get this working. Thanks!
Thank you for an easy to follow tutorial that helped me get this setup. I did run into an issue that was causing me some issues. I use the SmartLife app and setup Tuya IOT like in this video. However, I kept getting the 2406 error. This was due to the region not matching my smart life app region. When you go into the Tuya IOT device tab (to setup SmartLife link to Tuya) make sure the correct region is selected. You will know if you have it correct by how many devices are connected. Hope this helps anyone that runs into the same issue. Great video!
Good tip, thanks.
I stepped waaay out of my depth adding my Zemismart blinds to HOOBS. This was immensely helpful. Thank you 🙏🏻
Thank you thank you very much. Your video is the only one I have found that explains very well how to connect.
Thanks for a super easy step-by-step guide. Exactly what I was looking for 👍🏼
You’re more than welcome!
I followed your steps and was winning…until… the very last part where you can’t copy the last code needed as they want as not you to now ‘verify your signature’ ? …and I have no idea how to do that lol
Where was this verification? On the Tuya iot webpage?
@@HomeSight it was on the same page where the password and ID are that you said to copy.
It said that it now requires further verification to improve security and was introduced about a month ago.
Thanks, I’ll take a look!
Nicely done. It is a bit outdated and the screens have changed a bit, but nothing that anyone can't figure out by themselves. Bravo!
At 4:32, under the "Link Tuya App Account" description, your screen says "Already added 1 account and 3 linked devices." I have three devices, two light strips by different brands from amazon and a garage door opener. My screen says "Already added 1 account and 0 linked devices."
What is causing the IoT platform to not detect the devices in my Tuya app? I don't understand what I have done wrong.
Many many thanks for your really helpful video!
Thank you so much was trying to set this up for ages and your tutorial worked 🙏🏻
Glad it helped!
nice one this helped loads even 3 years on
Great video ! Wish I could see someone integrate Salus Devices with homebridge.
Thank you for a great tutorial! Followed all the steps - everything works, but I can’t see any switches that are connected to Smart Life App in the Homebridge. The Homebridge log shows no faults or alarms…. Any tip would be very appreciated… thanks!
Thank you. Some trial and error on region etc. But it worked fairly easily in the end.
wow, thank you. perfect!
Thanks for the video, I have followed all steps however my devices don’t show on the homebridge? Any ideas?
Same did you found a fix?
Me too, I have added a switch to the Smart Life app on my phone but it's not showing up in homebridge. Help!
Try setting it to Tuya Smart. Also, it appears the verified app is no longer supported. There is one by linanw that appears to work.
hey there, found this tutorial after watching the official one but i'm still getting the "error 1106 permission denied" error, what do i do?
Thanks mate, great video! You made it all so simple.
I do my best! Glad it helped you out!
Nice Video. By any chance do you think it would be possible to Add an AC to homebridge using the Tuya S08 Pro IR blaster & sensor
The A1 Pro Max lock was added to HomeKit, but it does not lock or unlock the door. The device was added, but it doesn't work. This might be because the lock requires a Bluetooth connection and only allows connections through the Smart Life app.
My device’s dont show after install? If i click on acceories nothings shows up
Hi I have the same problem, did you resolve it by now?
@@balazsimricsko8460 create new tuya dev account but this time choose all the api services
Any idea how I get notified if my tuya smoke detector is detecting smoke? By now only the app will trigger a notification but HomeKit doesn’t. It always says no smoke detected, while the alarm on the device is going
I am trying to add a dehumidifier. I can see the device in the cloud api, however no in the home bridge, As per I know this type of device is not full compatible, Is there a possibility?
easy easy with your help. Thank you
Please everything is working well except some curtain wifi switch, i don’t see it in the home app
And I can’t find the problem or a solution
Please advise
Thanks so much for the awesome guide
Great Video. Did everything as instructed. but in homebridge. The device is on Tuya IoT. But when I open Homebridge, in the command panel I get: Got 1 Device (so it is finding it ) than fetching etc, finally i get: [Tuya] Unsupported Device: Name of device (in brown). Can you help please
4:23
Hi, I do step by step what you do I have error „no permits” I dont know why… can you help me with this? 😢
Try to change the datacenter in top right the page. I get the same problem.
I change the datacenter location to "center europe" and its worked
Hello, it is free to use tuyaplatform ? Thanks for the video
Thanks man! Great tutorial!
When I try to "Add App Account" it gives me an error: "No access", what can I do then?
Got an email stating from TUYA "The service IoT Core you subscribed to will expire on 2024-08-28" and now I can't use homebrdige to connect to my lights.
I have tried going through the tuya site to renew but I'm not sure what I need to do. Was it just a trial period? Do they offer a way to subscribe? I can't sing up as a developer... it said something like $25k
Same. Seems like they are monetising a previously free service now. Crazy. Leaves users in a lurch.
Thanks for the video. But how i am gonna unlink my device cause i got only 2 devices to link and need to try it again.
you need ur macbook on to this works?
Will this work with light strips that are bluetooth only? Im having issues and wondering if maybe I need the wifi light strips for this to work.
i don't get any devices . in the tuya cloud i can see all devices but not in the homebridge or homekit.
Strange... rebooted? have you got any other devices showing in homebridge?
I have tryed to connect the Tuya app to my project and it does not show up in the project at all and no devices show up in the project at all and I followed all the steps that you did and it did not work at all so what do I have to do to get it to work the first time
I am getting this error, could you please help me Required `id` property is missing in device configuration, I received:
{
"device_type": "form"
}
thank you
Brilliant, Thank you for this detailed Tutorial,
PS: can you send a link of the video were you explain how to install homebridge.
thanks
Great video, thanks! Does anyone have issues with thermostats reading / reporting incorrect numbers?
Hoobs 4 changed the process. Any tutorial on Hoobs tuya set up?
Hi. Is your light and switch using Wifi protocol? I wonder will the homebridge integration works for devices/lights/switches using Bluetooth mesh and zigbee protocol via gateway/hub added in Tuya/smart life App?
Yes, light and socket are using WiFi. I also have a Tuya zigbee gateway which allows zigbee devices to work with the integration.
following all steps i can add my device to tuya website but in homebridge i cannot see the accessories ...so in website I can see the accessories but in homebridge accessories tab nothing is there… any idea?
If I use this plugin would I be able to add all my devices to HomeKit, the current smartlife plugin I use not all my devices show up homekit which includes a power strip and a star projector
Hi, I think there is still a limitation since it doesn’t support all devices. Worth a go though, I would say
Maybe You know what schould I do?:-)
[11/16/2022, 9:04:32 AM] [TuyaPlatform] Login failed. code=2406, msg=skill id invalid
[11/16/2022, 9:04:32 AM] [TuyaPlatform] Please make sure you selected the right data center where your app account located, and the app account is linked with cloud project.
Hi, my tuya homebridge disconnects from homekit when I turn off the pc that I used to set it up, even though I have a tuya bluetooth hub, why?
where do i find the end point url?
I did something like this once before but after a month Tuya wanted me to pay, is this the same or did I make a mistake last time I did it? Please confirm this process will not require payment. Thanks.
Same for me. After 1 month the free trail was over. They did extend the trail but not sure what to do after that.
🎉This is a great tutorial. However it’s not working. I have done everything exactly and I don’t see and errors. Could you help me?
Great video. When trying to scan the qr code for Smart life app auth to says "you cannot scan the qr code to add a device deployed in another data center". Any help? Thanks
Fixed. How is it possible to have acess when not in the wifi?
I'm guessing you had to ensure you had the correct region selected before you scanned the QR code, just for anyone else reading this. There is now a warning on the Tuya Platform website when it shows the QR code.
mine is failing to add the scan :(
very helpful thank you
Is it completely free? What does the “free trial” mean in creating the cloud project? Would it still work when the free trial expires?
Signed up for the free trial here. No payment info was requested. The issue I’m having is that my Smart Socket shows up in HomeKit per the instructions, but the on/off button has no effect on the actual socket. Works fine from the Tuya Smart app itself.
Kang, yes it’s free for 1 year. After that you can renew.
@@HomeSight Do you know if it would be still free to renew?
Yes, free to renew.
@@HomeSight How so exceuse me? It's been one month after following the steps in this video and now the IoT Service expired and is asking to pay 25'000usd per year D:
will this work locally ?
Tuya wont let you unlink accounts but sends this error “The number of projects linked with this Tuya Smart App account has reached the upper limit of 2. Unlink the account from existing projects and try again.”
But also if you look through their FAQ you’ll find “Note: Currently, deletion of cloud development projects is not supported, we will support it as soon as possible.”
how can i join to the hombride i tried and it does not let me 😪
just brilliant!
Thank you Sir !
Most welcome!
Hey man, do you have any idea if the Lidl smart hub works with the HB Tuya integration yet? Thanks :)
Hi, I’m not sure about the smart hub itself, I’m pretty sure I have a few of the other devices, but not the hub to try.
TuyaOpenAPI] API subscription expired. Please renew the API subscription at Tuya IoT Platform
After a month it expired for me, what do we do now?
I am getting an 1100 error which documentation says that the username or app schema parameter is empty but I checked the config file and it is not. Cannot get it to login.
TuyaLan No devices found. Need help
Setup: wifi 2g - Light Bulb but my hoobs is connected to the 5g, Will it work?
Tried to use the Tuya Platform and it works. Can someone help to make it work on Local Tuya?
BTW Im using Hoobs
Is it a local integration or does it uses tuya cloud in some way when triggering devices ?
It does rely on the cloud, but the new integration will allow some level of local control soon, they are still working on this at the moment.
I live in thailand. I scan qr code by my mobile but error message "you cannot scan the qr code to add adevice deployed in another data center . how to resolve it?
Have you ticked all the data centres when you did the setup on Tuya webpage?
Thanks!
I Have no clue why mine doesnt work, have followed steps perfectly :(
i have tried to make an account for tuya several times but i dont get the certification email
Have you checked your spam? That’s where mine ended up?
@@HomeSight i've tried another email adress. now it works but after setting everything exactly like in your video i'll not have any devices. ob the tuya website are devices...
Glad you got the account working in the end. Why don’t you have any devices in there? The email used for the Tuya account and the smartlife/tuya app don’t need to be the same. They get “paired” by scanning the at QR code through the app.
It worked but I cant change the coler and now my homebridge is broken 😂… i need to reinstall all
Добрый вечер. подскажите, что я сделал не так. Не запускается плагин tuya.
[1/31/2024, 9:16:29 PM] [HB Supervisor] Restarting Homebridge...
[1/31/2024, 9:16:29 PM] [HB Supervisor] Starting Homebridge with extra flags: -I -P /var/lib/homebridge/node_modules --strict-plugin-resolution
[1/31/2024, 9:16:29 PM] [HB Supervisor] Started Homebridge v1.7.0 with PID: 16197
[1/31/2024, 9:16:29 PM] Error: listen EADDRINUSE: address already in use :::51117
at Server.setupListenHandle [as _listen2] (node:net:1817:16)
at listenInCluster (node:net:1865:12)
at Server.listen (node:net:1953:7)
at EventedHTTPServer.listen (/homebridge/node_modules/homebridge/node_modules/hap-nodejs/src/lib/util/eventedhttp.ts:164:20)
at HAPServer.listen (/homebridge/node_modules/homebridge/node_modules/hap-nodejs/src/lib/HAPServer.ts:377:21)
at Bridge. (/homebridge/node_modules/homebridge/node_modules/hap-nodejs/src/lib/Accessory.ts:1365:18)
at step (/homebridge/node_modules/homebridge/node_modules/tslib/tslib.js:195:27)
at Object.next (/homebridge/node_modules/homebridge/node_modules/tslib/tslib.js:176:57)
at /homebridge/node_modules/homebridge/node_modules/tslib/tslib.js:169:75
at new Promise ()
[1/31/2024, 9:16:29 PM] Got SIGTERM, shutting down Homebridge...
[1/31/2024, 9:16:31 PM] Homebridge requires Node.js version of ^18.15.0 || ^20.7.0 which does not satisfy the current Node.js version of v18.13.0. You may need to upgrade your installation of Node.js - see homebridge.io/w/JTKEF
[1/31/2024, 9:16:31 PM] Loaded config.json with 0 accessories and 1 platforms.
[1/31/2024, 9:16:31 PM] Loaded 0 cached accessories from cachedAccessories.
[1/31/2024, 9:16:31 PM] ---
[1/31/2024, 9:16:32 PM] Loaded plugin: homebridge-plugin-ewelink-cube@1.2.0
[1/31/2024, 9:16:32 PM] Registering platform 'homebridge-plugin-ewelink-cube.eWeLinkCUBEPlatform'
[1/31/2024, 9:16:32 PM] ---
[1/31/2024, 9:16:32 PM] [HB Supervisor] OS: Linux 4.4.302+ arm64
[1/31/2024, 9:16:32 PM] [HB Supervisor] Node.js v18.19.0 /opt/homebridge/bin/node
[1/31/2024, 9:16:32 PM] [HB Supervisor] Homebridge Path: /var/lib/homebridge/node_modules/homebridge/bin/homebridge
[1/31/2024, 9:16:32 PM] [HB Supervisor] UI Path: /opt/homebridge/lib/node_modules/homebridge-config-ui-x/dist/bin/standalone.js
[1/31/2024, 9:16:32 PM] Loaded plugin: homebridge-tuya-platform@1.5.0
[1/31/2024, 9:16:32 PM] Registering platform 'homebridge-tuya-platform.TuyaPlatform'
[1/31/2024, 9:16:32 PM] ---
[1/31/2024, 9:16:32 PM] Loading 1 platforms...
Setup Payload:
X-HM://0023RXEGI17AK
Enter this code with your HomeKit app on your iOS device to pair with Homebridge:
"Failed to bind App Account to the project, possibly due to the following reasons." Don't work..
Good evening. tell me what I did wrong. The tuya plugin does not start.
[1/31/2024, 9:20:52 PM] [HB Supervisor] Restarting Homebridge...
[1/31/2024, 9:20:52 PM] [HB Supervisor] Starting Homebridge with extra flags: -I -P /var/lib/homebridge/node_modules --strict-plugin-resolution
[1/31/2024, 9:20:52 PM] [HB Supervisor] Started Homebridge v1.7.0 with PID: 16483
[1/31/2024, 9:20:53 PM] Error: listen EADDRINUSE: address already in use :::51117
at Server.setupListenHandle [as _listen2] (node:net:1817:16)
at listenInCluster (node:net:1865:12)
at Server.listen (node:net:1953:7)
at EventedHTTPServer.listen (/homebridge/node_modules/homebridge/node_modules/hap-nodejs/src/lib/util/eventedhttp.ts:164:20)
at HAPServer.listen (/homebridge/node_modules/homebridge/node_modules/hap-nodejs/src/lib/HAPServer.ts:377:21)
at Bridge. (/homebridge/node_modules/homebridge/node_modules/hap-nodejs/src/lib/Accessory.ts:1365:18)
at step (/homebridge/node_modules/homebridge/node_modules/tslib/tslib.js:195:27)
at Object.next (/homebridge/node_modules/homebridge/node_modules/tslib/tslib.js:176:57)
at /homebridge/node_modules/homebridge/node_modules/tslib/tslib.js:169:75
at new Promise ()
[1/31/2024, 9:20:53 PM] Got SIGTERM, shutting down Homebridge...
[1/31/2024, 9:20:55 PM] Homebridge requires Node.js version of ^18.15.0 || ^20.7.0 which does not satisfy the current Node.js version of v18.13.0. You may need to upgrade your installation of Node.js - see homebridge.io/w/JTKEF
[1/31/2024, 9:20:55 PM] Loaded config.json with 0 accessories and 1 platforms.
[1/31/2024, 9:20:55 PM] Loaded 0 cached accessories from cachedAccessories.
[1/31/2024, 9:20:55 PM] ---
[1/31/2024, 9:20:55 PM] Loaded plugin: homebridge-plugin-ewelink-cube@1.2.0
[1/31/2024, 9:20:55 PM] Registering platform 'homebridge-plugin-ewelink-cube.eWeLinkCUBEPlatform'
[1/31/2024, 9:20:55 PM] ---
[1/31/2024, 9:20:56 PM] [HB Supervisor] OS: Linux 4.4.302+ arm64
[1/31/2024, 9:20:56 PM] [HB Supervisor] Node.js v18.19.0 /opt/homebridge/bin/node
[1/31/2024, 9:20:56 PM] [HB Supervisor] Homebridge Path: /var/lib/homebridge/node_modules/homebridge/bin/homebridge
[1/31/2024, 9:20:56 PM] [HB Supervisor] UI Path: /opt/homebridge/lib/node_modules/homebridge-config-ui-x/dist/bin/standalone.js
[1/31/2024, 9:20:56 PM] Loaded plugin: homebridge-tuya-platform@1.5.0
[1/31/2024, 9:20:56 PM] Registering platform 'homebridge-tuya-platform.TuyaPlatform'
[1/31/2024, 9:20:56 PM] ---
[1/31/2024, 9:20:56 PM] Loading 1 platforms...
Setup Payload:
X-HM://0023RXEGI17AK
Enter this code with your HomeKit app on your iOS device to pair with Homebridge:
When I click cloud and Development it tells me to sign up for a plan
Yes, just select the free plan.
It will not allow me to download the plugin
{SOLVED!} I follow all the step and all work but my device (work on smart life app) dont appear on homebridge.. how to solve it?
My device appear on tuya IOT platform, all are on but the dont appear on homebridge (docker, synology)
The problem com from the "Service API", all are good configure like the video but the web site dont allow my api, how to solve it?
Did you fix this after I have the same issue?
@@leecummins9068 yes i have ! You need already help?
@@FRKilian39 what did you do to fix it?
@@leecummins9068 to fix it you need another account, the problem is when you generate purchase when you create project, the authorize api program not purchase good and its look all of the next step, so go on the page of the api products needed (smart home device management, authorasation, smart home family management and other..) and save the url of the product, create another account with another program like the vidéo but before auto purchase the « authorize api product » in configuration wizard, go to the url of the product and claim it all before, after all product are buy, go on the configuration wizard and add the authorize api product claim before, that’s what I make to solve the problem, I hope my solution helps you (sorry for the English I’m French) bye ✌🏻
@@FRKilian39 je n’ai pas tout compris à ta solution mais je dois avoir le même problème. Je veux bien ta solution en français. Idem je n’ai rien dans homebridge et bien suivi la vidéo. Merci.
i am stucked at scan QR code. after scanning it says no access. i have enabled all data centers.
In the qr window choose your current country in drop-down option