How To Make A Simple Relay Circuit
Вставка
- Опубліковано 25 сер 2024
- This Video Show You "How To Make A Simple Circuit Using A Relay"
It Will Also Tell You "What Is A Relay? & What Is It Used For?"
The Things You Need Are:
*6V Relay
*10K Ohm Resistor
*LED (Light Emitting Diode) (x2)
*9V Battery
*9V Battery Clip
*6V Power Supply (If you don't have one, you can use another 9V Battery along with a 7806 Regulator)
*Switch (Single Pole Single Throw)
This Is the Link to the Circuit Diagram From:
#Website: ayj.webs.com/ap...
#Facebook: www.facebook.c...
Join Us On Facebook @ AYJ (Our Page) - / 277921902329626
Website : ayj.webs.com/
My friend, i want to thank you for this very clear explanation of how a relay work.
I enjoyed the simplicity of design. One single resistor, barely no jumpers, clean and efficient.
Thanks! That was an excellent explanation. I ordered my relays today!
Thank you kind sir for your simple explanation on relay's. This truly has made it easier for me to now embark on my relay switch task.
QUIT INTERESTING ! THANK YOU SO MUCH !
this mini prroject only i need i searched and this is a one of the simple mini project and it is useful to give explanation of abut relay
1 M view, congratulations 🎉.
Thank you very much for giving me the description of a relay
Nicely explained. Thank you for sharing this video.
Hey Bro, I just want clear this thing to everyone, NORMALLY CLOSE (N.C.) It means that the circuit has the ability of current flow at state.NORMALLY OPEN (N.O.) it has open circuit that no current flow on circuit. Terminal 3 and 5 is (N.C.) and 3 and 4 (N.O.) When you check terminal 3 and 5 theres a light coming to it (N.C.)
Thank you very much
the explanation was osm! 1 of the best videos to understand basics of relay
You are my Saviour bro !!!!Thanks a lot !! I've subscribed you in all my accounts!!!thanks again!
Thanks for this brother, really helpful
Thanks for your video!!! 5 LIKES! Excelent diagram!! The best relay's anatomy of ever...
Great Explanation.
Superb bro
Nice Presentation. Thank you.
Thanks for this video. Lot of information is covered.
Well explained,Keep it up
Thank you
Thanks.👍🇬🇧
Great explanation
nyc video easy description for fast understanding
Tanks for information.
That was very interesting but yes the camera was a bit to close to the relay but still interesting 😉
great video, very helpful and clearly explained!
Thanks a ton..!! instead of providing 6v i provided 5v through my arduino.. This works pretty awesome!! I will be pinging you with few questions.. but first i will have a look at few other videos..
awesome video, Thank you so much!!!
very easy!!!!
Thanks too much from pakistan
explanation was awesome
Thanks for the video!
Loved the explanation broo
My problem has solved..
Thanks.....
You have it backwards, the terminals that made the bulb light is NC >.>
Good bro
very good , thanx so much ^_^
Nice job.
Good explanation
thanks man
nice!! easy when ecplained !
its a great video - and it works great
Helpful video! Good quality... Thanks!!!
nicely done bro. thanks
thank you nice video
nice jaywardhans..
good project
hey.....thanq both of u........
u gave me far better clarity than my tutor
i liked it and also I subscribed u.......
hope to see many useful videos further
i will be following ur videos
thanx once again
very helpful!!
Super bro
Thank you for sharing your videos.I'm trying to build Christmas lights for next season and my audio translator and chaser are 12volt DC and I need to use a relay series to run my lights on 120volts AC and you answered my questions.
very useful, thank you
thanks
Good
thanks Jain Brother
Super
Very good tutorial but much room for improvement so far as the camera is concerned.
Thanks a lot anyhow.
thank you. it was very helpful for me
Nice video ! Gaurav.
This is very interesting
thank you so much!
nice
This is good, thanks!
It's good
awsome demo, good also please fix your camera..... its
disturbing
That’s how I made my first relay circuit a few days ago, you don’t need a relay for that though since the switch has an NO and NC side
Awesome stuff! thank you
thank you
Very Good. I want to make a relay ( to connect to the water pump of a desert cooler), so that the pump works for some time and remains stopped for sometime ( say it is on for 1 minute and stops for 2 minutes) .
Is it possible, How ??
that is good
Thanks
Thank u bro
Thanks bro
big up
so in case anyone doesn't understand why you would need two isolated circuits, the purpose is to control a high power/voltage circuit with a lower voltage / power circuit. The high power circuit being completely isolated from contact so that risk of shock is minimized.
nice,...
change is coming !
thank man
perfect,
hi im a beginner on this love what u did here. i buy some rgb 12v strip that i want to connect a 555 timer on but dont know where to start please help
djcarter asher Use a transistor as a switch
How to run this relay with main 230 volts without burning the resistor?
very useful :D :D
it is good explanation. expected some more better explanation
could u use a switching power supply
Hello,Hope you are well.I have a problem.I want a part like diode that can forward electricity from one side but don’t allow negative or positive from another side.For example I want to forward negative from one side to another but It should block both positive and negative from another side.Hope you can help me. Thank you.
does the picture in the 3:43 contradict with the other images are shown before
+merameskul YES, thankyou!!
Please rectify this!...its too important to ignore
There are many components to learning circuits. One resource I found that successfully combines these is the Gregs Electro Blog (check it out on google) without a doubt the most helpful info that I have ever heard of. Check out this interesting site.
its good for engg
In ur diagram there is mistak regarding NO n NC
U showed vice versa
NO means there is no contact in between tow point
NC mean two points are in contact with each other
After geting the power both changes their state NO to NC and Nc to NO
can u use ujt and scr to make time relay delay
Can we use 1k resistor and also 9v battery
normally closed (n/c) means connected, and normally opened means (n/o) not connected
On and off relay photo diode using photodiode
Which relay would I use for 230v AC switching in this same way? I want to switch a heated towel radiator element OFF when the central heating is turned ON...
So i have a question. Though we have studied basic electronic in Civil engineering. Since you using Switch to manipulate relay for each LED to turn ON or OFF. I hope its DC current you are using as main power supply. Will we get automatic turning on and off of each LED if the supplied current to relay coil terminal was AC voltage.... ? Just a thought...
+zia khan Please share with me the answer to this question of yours, in case you figured it out. I dont see it answered by the publisher of this video.
Thanks Khan sahab.
that relay can be use an auto cut of charger??
instead of using two supplies, you can use three termninals of the switch to light two LED's! in single 6v supply
Can I use the same battery for both outputs on the relay for 2 different circuits? I did this but the relay keeps clicking. It can't stay on.
So the resistor is there to allow the 6v relay to safely run on the 9v battery? Is that correct? How do you determine the amount of resistance needed?
SOAHCSOAHCSOAHC No, we use the resistor for the LEDs not for the relay.
how we can circuit with 3 leds and 3 buzzers but i need to see one led light and 2 others no.
if you leave the relay switched ON for one day, will it get hot damaged?
it will degrade
cool to know what and how a relay works but what use can it have? how about a practical example! Good job though :) " a work of art is beautiful if it's useful!