Make sure you enter Cisco's Live Stream Giveaway! www.airsoftgi.com/product/Ciscos-Live-Stream-Giveaway-Rules-Click-for-Detail-Every-Tuesday-Thursday-DO-NOT-BUY-THIS-ITEM-66641/
@@tnuctaf3157 lancer aero goggles work good. they're like 20 bucks and i've been blasted in the face with them multiple times with no cracks or anything yet.
If you know any tailors, get on their good side. They make all of this so much easier and cheaper. Also, a lot of them have experience working on law enforcement and military uniforms
This is a super useful video. I got to the point where I want to run a balaclava as opposed to a full lower mesh to get better sightlines and this is exactly the type of diy i needed. Thanks Boaz and GI
Funny timing, I just started making a few different designs of insert to test after buying some heavy duty stainless mesh from eBay. That's an alternative to ripping up a mask. I paid about £3.50 for a decent sized square that'll make 2-3 inserts depending on size. I just used some webbing I had on hand and stitched it on. One tip I have is to cut the design in paper first and test the fit. If you're happy with it, use the paper as a template. Can use some tape, marker or correction fluid to outline the shape also.
I find the lower face mask eyepro combo very annoying, the two seem to interfere with each other's space making it very uncomfortable. I might try this or get one of the balaclavas with the mesh in them.
Just made one today and the difference between mashing my face on a stock and instant comfort was amazing. 5 minutes with an angle grinder and contact spray adhesive was all it took.
I am tall guy with an average sized head. I bought the One Tigris small foldable 4.5” mask, and it fits snug and is a lot lower profile than the regular 6” version!
The balaclava mask doesn’t protect from BBs. I was shot in the face and it left a mark for two weeks. Get a lower face mask that has padding (similar to backpack straps) and the mesh in front. It’ll save you from bruises on face. Also just buy a riser mount to help with ADS
Or just use a mesh mask with nylon sides? They're awesome, cost the same, comfortable, and you can match your camo. I've been using one for over 5 years now, haven't seen anyone with these old pattern masks for a while
What’s something to get for the biceps especially the inside cause Airsofting is fun but doesn’t make you look to good outside of it especially with the bruises and welts
My issue with the one tigris type mesh masks isn’t the cheek weld but it makes it very hard for me to look down at my the mags in my chest rig. I’m going to be doing this same mod. I might try out the dollar store for a stainless kitchen strainer as long as it’s not too flexible.
If your going for a cheaper option just buy the shadow hood mask, cause all that stuff you need to cut it and put it together is going to cost over $20 and that's how much the hood mask is. Love the idea though keep up the smart work
I played my first airsoft game today. Rental gun rental mask. I could not get a sight picture. Tracking my bbs fasho. I won capture the flag. Shot about 4 of em to get the flag and one more to defend it. Held it until time we won 🏆
Make sure you enter Cisco's Live Stream Giveaway! www.airsoftgi.com/product/Ciscos-Live-Stream-Giveaway-Rules-Click-for-Detail-Every-Tuesday-Thursday-DO-NOT-BUY-THIS-ITEM-66641/
Could you guys do a vid on the best goggles for people wear glasses please
@@tnuctaf3157 lancer aero goggles work good. they're like 20 bucks and i've been blasted in the face with them multiple times with no cracks or anything yet.
I feel this video is almost a response to Desert Fox video knocking out someones tooth because they had no face covering.
Brooo I was just about to aayyy tht
Bro same
I had face pro on and someone had a hot gun with metal BB’s which went through the mesh and knocked half my tooth out
@@chelseasilver5219 lawsuit
@@chelseasilver5219 lawsuit
If you know any tailors, get on their good side. They make all of this so much easier and cheaper. Also, a lot of them have experience working on law enforcement and military uniforms
This is a super useful video. I got to the point where I want to run a balaclava as opposed to a full lower mesh to get better sightlines and this is exactly the type of diy i needed. Thanks Boaz and GI
Glad we can help! A little DIY can go a long way!
The tag at 0:25 (Glizzy Gobbler) put a smile on my face, I'll give you that. Love your content guys, keep it up!
Funny timing, I just started making a few different designs of insert to test after buying some heavy duty stainless mesh from eBay.
That's an alternative to ripping up a mask. I paid about £3.50 for a decent sized square that'll make 2-3 inserts depending on size. I just used some webbing I had on hand and stitched it on.
One tip I have is to cut the design in paper first and test the fit. If you're happy with it, use the paper as a template. Can use some tape, marker or correction fluid to outline the shape also.
I’ve already done this to my old mesh, haven’t played with it yet but it’s an absolute game changer
Here’s a tip. Don’t cut both sides. Cut the one side you shoot on most.
I mean I’m always switching sides so this is kinda cool I would j keep the nose piece
I find the lower face mask eyepro combo very annoying, the two seem to interfere with each other's space making it very uncomfortable. I might try this or get one of the balaclavas with the mesh in them.
Just made one today and the difference between mashing my face on a stock and instant comfort was amazing. 5 minutes with an angle grinder and contact spray adhesive was all it took.
I just use the onetigris storm mask, it's comfortable and looks cool
it's the same problem with a regular mesh mask though, can't really aim down sights unless you have a riser or a taller optic.
@@eggo369 I have a rlly big riser that puts the optic up and away from my face
@@Aquafresh_Official Ok that's good, I just don't like having a thing covering my whole face so I'm planning on making this.
@@eggo369 yea, that's completely reasonable
I am tall guy with an average sized head. I bought the One Tigris small foldable 4.5” mask, and it fits snug and is a lot lower profile than the regular 6” version!
I feel like I’ve seen this “trick” from you guys like 10 times already 😂
Yes but there's always beginners that need this stuff. Otherwise they'll be discouraged and our hobby won't grow
@@eduardochinchilla2198 beginners also have search bar and access to older videos . doing this makes them worse at research
The balaclava mask doesn’t protect from BBs. I was shot in the face and it left a mark for two weeks. Get a lower face mask that has padding (similar to backpack straps) and the mesh in front. It’ll save you from bruises on face. Also just buy a riser mount to help with ADS
noone said it did... the only face pro necessary is eyes and teeth . averything else if comfort .
i have a Tigris one. it's not a stretchy material one but it has a nylon like material in the checks to keep my checks protected
Or just use a mesh mask with nylon sides? They're awesome, cost the same, comfortable, and you can match your camo. I've been using one for over 5 years now, haven't seen anyone with these old pattern masks for a while
That’s exactly what I use. Don’t know why the full face mesh ones are so popular when you have that as an option.
For the grown ups, Dremel ftw
or sewing
I built one of these for milsims but I run a dye mask for any other game
Do you notice your field of view being hindered while playing with the dye mask?
I had so many cheap mesh masks around and ended up doing this same thing a few months ago and it's worked SUPER well outdoors
This was also my problem since I'm using mesh face mask. The only solution I made was to buy a scope riser then everything's good.
What’s something to get for the biceps especially the inside cause Airsofting is fun but doesn’t make you look to good outside of it especially with the bruises and welts
Wear long sleeves. If you already are, layer up. The more padding between the BB and your skin the less likely you will get a welt.
Get something like a football patted long sleeves. I dont mind the pain but in public i look like a drug addict.
Hi everyone,please could you advise the best glue to use?thanks
My issue with the one tigris type mesh masks isn’t the cheek weld but it makes it very hard for me to look down at my the mags in my chest rig. I’m going to be doing this same mod. I might try out the dollar store for a stainless kitchen strainer as long as it’s not too flexible.
Or you could buy a delta Mike snood?
or you could be usefull and not a trained little consumer . be a man and make something kid
If your going for a cheaper option just buy the shadow hood mask, cause all that stuff you need to cut it and put it together is going to cost over $20 and that's how much the hood mask is. Love the idea though keep up the smart work
Or evike sells what he made for like 12$
I still prefer not getting hit in the face at all. I use the big face masks and I build my gun around how my mask rests on it.
I tried this and waiting to play a game to test it
I played my first airsoft game today. Rental gun rental mask. I could not get a sight picture. Tracking my bbs fasho. I won capture the flag. Shot about 4 of em to get the flag and one more to defend it. Held it until time we won 🏆
Did the same thing last month, then I came across this video😄
Cygnus armory Face Warrior Masks a little more expensive but worth the price. 😉
That would be much easier with a dremel lol
Evike sells these already cut and nice and neat
the pharmacy sells tampons but i dint need them because i am a man . learn to make things you docile consumer
Optic risers are your friend
honestly im doing this i have a spare old one of these
or you could learn to stitch ..... and make that balaclava . it is a usefull skill that every special forces guy learns ...
i thought this was already a product you guys sold?
can y'all test these masks point Blank?
Why not just buy a riser?
Might just get a Tigris one , with the cloth padding cheeks
It works!
Guy Fawkes mask covers everything though, all you need is the eye protection.
I made 5 or 6 of these with an angle grinder, scotch glue, and gorilla tape. Sold em for 5 bucks each.
Same material as some strainers you can buy one for a dollar and use that instead 😉
Just give me the link to the balaclava
Check out Valhalla mask ! best airsoft masks there is :-)
Forbidden Mozzarella cheese 💀
I like diy stuff
$20 paintball mask?! Where can I get a $20 paintball mask?!
Note to self a hot glue gun can explode so warning advised.
nice shirt
Yes indeed a razor blade is so much safer than scissors
Why is this video 20 mins 🤦🏽♂️
not gonna thank Jet for the inspiration?
If you look at their shorts, they were filming this 4 days ago
Matrix also made this product close to 3 years ago
Sup baby
Lmao 🤣 has to be the worst tutorial ever
Nice video, also first comment
Cap
Basically a cheap version of the nb tactical ghost mask and balaclava combo. (Wich you guys should maybe also be selling in the us!)