Це відео не доступне.
Перепрошуємо.
I 3D Printed ANOTHER Iron Man Cosplay Suit - MK40 Shotgun
- Додати в
- Мій плейлист
- Переглянути пізніше
- Поділитися
Поділитися
Вставка
Розмір відео:
- Опубліковано 17 сер 2024
КОМЕНТАРІ • 152
Наступне
Автоматичне відтворення
Look at the JUNK I made with my 3D PRINTER!Frankly Built
Переглядів 51 тис.
I Drove with 2 IRON MAN SUITS to a Con! | Here's How It Went....Frankly Built
Переглядів 14 тис.
How to Size and Assemble 3D Printed Iron Man GlovesFrankly Built
Переглядів 69 тис.
бедный дед на ламборгини проверяет силу прохожих и платит за подъем гириABRACADABRA TV
Переглядів 8 млн
Обман ради папы #юмор #топКостя Павлов
Переглядів 3,9 млн
👊ЧЕРНИК: Все! Під Курськом НОВИЙ ПРОРИВ. Підходимо до АЕС? Путіна ПРИТИСЛИ. Готують ТРАНЗИТ ВЛАДИ?Сейчас
Переглядів 460 тис.
Зачем страны меняют флаги? #россия #ссср #новаязеландияПослезавтра
Переглядів 5 млн
Real Iron Man Expandable Briefcase Suit - FULL METAL!! (Iron Man Mark 5 Armor)JLaservideo
Переглядів 15 млн
Creating Iron Man suit. Full workflow by @AlexLab. From sketch to full size shell.ALEX LAB
Переглядів 1,2 млн
What is the LOUDEST 3D Print?Maker's Muse
Переглядів 5 млн
The Evolution Of Iron Man / Tony Stark (Animated)Tell It Animated
Переглядів 26 млн
Wearing My 3D Printed Mk85 Iron Man Cosplay - How to put it on!Frankly Built
Переглядів 1,1 млн
How to 3D Print Large Models with Small 3D Printers - Step by step (Beginner)3D PRINT OVER 9000
Переглядів 39 тис.
I 3D Printed the Giant Sword from Monster Hunter! - Jawblade Build TutorialFrankly Built
Переглядів 31 тис.
THE SUIT CAN FLY NOW (sort of) - 3D Printed Iron Man Mark 46 Cosplay Update Video #3Plentiful Props 3D
Переглядів 12 тис.
How I Made Dr. Fate's Helmet | 3D Printed Cosplay Mask |Frankly Built
Переглядів 49 тис.
Зачем страны меняют флаги? #россия #ссср #новаязеландияПослезавтра
Переглядів 5 млн
Кадиров пішов НА ПЕРЕГОВОРИ із ЗСУ? АХМАТівці ТІКАЮТЬ! Київ захоплює НОВІ МІСТА РФ | НОВИНИ СЬОГОДНІУКРАЇНА СЬОГОДНІ
Переглядів 519 тис.
«Синку, ти не переживай. Сюди вона не впаде, вони всі повз летять»: військовий про перші дні війниСуспільне Запоріжжя
Переглядів 621 тис.
Карпати - Динамо / УПЛ / 3 тур / Огляд матчу #Карпати #Динамо #уплтбУПЛ ТБ
Переглядів 289 тис.
😳 Все русские уже знают итальянский?🇮🇹Super Italiano
Переглядів 6 млн
Gli occhiali da sole non mi hanno coperto! 😎Senza Limiti
Переглядів 7 млн
Running With Bigger And Bigger FeastablesMrBeast
Переглядів 80 млн
ЗСУ в Суджі надали місцевій бабусі можливість вільно висловитися про путіна #shorts #суджа #путинАпостроф TV
Переглядів 805 тис.
The Shotgun is my favorite suit from the Iron Legion. If you haven’t checked out the concept art for it, it’s pretty bomb. The limbs lock together to give it a streamlined footprint to minimize air resistance. That’s what the little toothed sections along the limbs and torso are for.
Thanks for sharing!
Hey man! just fell upon your channel a week ago when I was looking to build some fun stuff with my 3D printers. Hands down, this is my favorite channel on youtube. Keep up the great work, the editing, production, and quality of your videos is amazing. Your greatest ability is to describe a very detailed process into something easily understandable for someone newer to the scene without us getting confused. Once again, Keep up the great work. I look forward to all your releases!
Hey thanks so much!
Now make the Heartbreaker and then the Hulkbuster!
Don't forget igor 🤣
@@dancingdilophosaurus651 Yeah him too!
Redsnapper woild be cool one
@@everthinggaming50829 Redsnapper and Bones!
@@DeadpoolXI1 I couldn't find any bones files tho
Great Mk40 Suit tour, Frank! I need to finish mine LOL. Very good point about how all of the suit files out there will not fit everyone without some kind of modification. Comes with the territory.
“I’m 6ft not”😂 another great video Frank
Wow that suit looks very wearable
Good job Frank
And that colour of filament looks good for painting over.
👍👍👍
I just bought a creality ender 3d pro. I have been thinking about getting a 3d printer for a few years now. I watched your video about getting into 3d printing, it was the push I needed to finally buy one. Thank you and you have a new sub.
i luv that uve mentioned the scailing !
10:16 it is called the antecubital fossa- also acceptable, “elbow pit”
Or ditch
Nice done mate nice done
27:00 PREACH! 🙌🏻 Just like “one size fits all” clothing. Someone who is 5’9” and 150lbs may think that Brand A has the best fitting clothing, and someone who is 5’1” and 170lbs may disagree, and prefer the fit of Brand B. Everyone’s bodies are different. Even people who have the same exact height and weight may have different proportions, and may prefer the fit of different suits.
Freaking cool 😎. Love this! Congratulations on the low waste number! Really excellent job!
im waiting for this man to have all 85 suits and the hall of amour for all of them ,like in iron man 3 during the house party protocol
Love to see a mark 3 it was my favorite of the suites
IF on the East coast, I can help with your Prints. Great Video Frank. cant wait to share my custom prints on Discord!!!!!! SOON!!!!
Inner elbow is called the ditch
Yes
Another great video, you spoil us lad!
Bit of feedback regarding the monoprice pla+ for anybody that's considering it- it's cheap, prints similar to sunlu pla+, only complaints are the delivery times due to Brexit etc and the advertised colours have been enhanced in the Amazon photos. Never had a colour be so far from what's advertised but it's no biggy if you're painting it, obviously.
Again thanks for the heads-up on the sunlu alternative 👌
Hell yeah shotgun is one of the coolest suits in ironman 3
Finally
Sick
You should resin cast the visor
My favorite suit omg...
Great job love your work
Now I want to see the finished suit
I’m not finishing this suit haha it was a commission print
" *just under 10 roles of PLA* "
oh my god
thats a lot!
Good Job! Your empty spools collection is HUGE. Have you ever thought about master spool? I think it would be a good idea to consider in your case. Keep it up Frank
Only few companies do that sadly
@@FranklyBuilt maybe in future more companies will provide spool refills, I think it's a big money saver
You should make mark 3
Maybe one day
what happened to the project? cant find the follow up video
awesome print frank!
I shipped it off to the buyer
@@FranklyBuilt Too bad he didnt upload a video about that suit totally worth it to make it as a shoutout for you!
Love it
I wish I had time and money to build an iron man suit, I would make a mark 20 and try to build a cabinet to have it in
Great video
Nice vid
Mk 39, Mk 40, I see we have the same tastes in Armour.
If you tell me the next one is the Mk 30, I swear...
Frankly how were u able to get the iron man suit in the perfect shape? Like the propotions are just perfect.. did u had like the whole suit in one file?
Yep. Do3d scaled the entire suit proportionally. If you print it at 100% it will come out properly to movie proportions usually
@@FranklyBuilt aight thank u
Now make the mark 36 peacekeeper
Hey man been watching your videos for a while on TikTok and I got an ender 3 pro which arrived a couple days ago, got it assembled etc but I’m having trouble because the filament dosent stick to the base it just keeps moving around with the nozzle, thanks for making these videos they really got me interested in 3D printing
Make sure your slicer settings are correct for the file your printing. Some files say to print below 60 degree bed temp. They are mistaken. Your bed temp has to be at least 60. Everything I print will be at a bed temp of at least 65 to ensure a good adhesion. Also make sure your bed is level. Lots of videos on UA-cam about leveling every model printer. Lastly you can use glue sticks on bed to get a good first layer. Actually one more lastly, you can select rafts under adhesion in slicer program. These pretty much assure a good adhesion.
Elbow pit actual name is Chelidon. The more you know!
Today I learned lol 😂
Sick👍
hello i saw your video and bought this model. It s possible to make it stand alone (with no one inside) like the ironman behind you in this video?
Can you 3d print out a classic RoboCop suit that has a working system for the visor and the leg holster
When you are going to sand and paint a part is it better to print with random seams?
I’m not
@@FranklyBuilt I know you are not with this one you already said it is a commissioned suit? but when you print your parts is it easier to use random seams so you don't have to sand the seam off?
Honestly I prefer a normal long z seam so I can sand it off in one shot
Hi i have a question :) i am planning to make MK II or may be similar iron man set. So, can a creality ender 5 plus handle this? Because cr-10 series very expensive for me
Regards
The 5 plus is perfect for it
@@FranklyBuilt thanks a lot :) also your videos and suits are amazing :))
do you mind saying how mucha commision like this costs?
No because I’m not doing one of these again haha
Hello from Brasil ,
I have the ender 3d pro, and I am not able to print the main of the mark 85, because it does not fit the printer have any tips
Save up for a larger printer
Quick question, if you were trying to 3D print a hollow torus so that there was no support inside and cutting the model a few times as possible, how would you go about that?
....huh? Lol it’s already hollow
What shop did you buy the Rust-Oleum Automotive Metallic red I was out and about today in B&Q and Homebase thank you
Homebase
I know you mention using sunlu filament sometimes, but have you ever used the sunlu S8 printer? I just got one and have been messing with it the last couple days. Haven't gotten it to the quality of my CR-10 v2 yet
I did an unboxing and review of one
Im doing the mk4 warmachine what do you recommend for infill percentage?
I do 5-10%
@@FranklyBuilt ok thanks an great job on the tutorial's youre the reason i got back into 3d printing keep up the great work
I see you printing one for yourself. 😂
Nah.
@@FranklyBuilt 😉 ok.
I think i am starting something here. Lol
I bought the Iron Man Mark III Full Body Armor Suit MK 3 Version 2 from Do3D I’m just starting to figure out proper alignment of those parts. I should consult with you on some of them. I have 15 machines so if I get my act together, I should be able to print up a lot of pieces fairly quick. I just wish I had my own nuclear power plant 🤓
anythings possible.......
What do you recommend for settings for getting overhangs without supports? I’m working on a project with Yoda ears and they’re being really troublesome
Also, recommendations for painting in snowy and cold weather?
It’s trial and error. That’s really it
Can you explain how to measure yourself to properly scale the suit so that it would fit (to avoid printing more than once :) ).?
I have a video on that
@@FranklyBuilt oh really will look into your videos then thanks for the answer!
@@FranklyBuilt ua-cam.com/video/QAqnI5DNQj4/v-deo.html for other wondering which video I'm pretty sure this is the one! :) thanks!
Hi Frank what nozzle size use?
Mostly a .6mm
Love your videos and i just started with 3d printing and learning from your past videos. One question why wood filler and not bondo? Also have you ever tried a brush on wood glue instead of wood filler? Do you think that would seal the layer lines better and maybe make the item stronger? I am coming from wood working to 3d printing so was surprised about wood filler.
how many walls do you use in cura?
Whatever stock is
Do you reclaim all of the failed prints and supports? If so, can you share your way?
Nah sadly. You can’t. Not without a pretty pricey machine
@@FranklyBuilt Too bad, I would not be so afraid of failed prints or too much of support used otherwise.
Thankfully we can create less waste with your tips ;)
What about outsourcing the waste management? I bet there is someone that makes filament again out of waste material.
It’s more expensive to send it off. Better to just recycle it
What printer did you use?
And what programs did you use to?
I'm new at 3d printing, have done lots of premade stuff but it sits too much. I have a creality cr 10, but it only allows me to use cura 15 like a very old edition which doesn't allow you to do anything but look resize and print. I really want to be able to cut designs up and or make changes in designs. Any ideas would be awesome. I think my favorite suit to print would be red snapper.
Thanks
Old Guy
Where can I buy a suit from you
You can’t LOL
Hey, I’m 3d printing an iron man suit if my own, but what cad software do you use to cut your parts down to print them. My suit is the mark 5 suit and I’m making it so it can turn into a suit case, so do you have any tips
Check my video “how to fit any model on any printer” it’s a newer video
is the extender for the ender 3 done by creality?
The z-height upgrade is
@@FranklyBuilt oh damn gotta find it then. My legs are too damn long to print on a standard
Iron Man suit Mach 40, the high velocity suit, aka Shotgun. The reason why it's called Shotgun is because of the Sonic booms it makes
What number of wall perimeters are you using and with what nozzle size? I'm printing my suit with 0.6mm 2 wall laters and 15% infill and now I'm thinking it's too much infill
I don’t mess with walls or perimeters. And damn 15% is a lot haha
@@FranklyBuilt I'll lower that for the next print 🤣
What 3D material do you use to print
PLA+
@@FranklyBuilt I really love your content and you inspired me to try and 3D print
What's the price of filament for these?
Pysch nvm, 10kg = 200 bucks
$200-300 ish
Congratulations is one of my favorite armor, what about mk 39?
In work
Cool video, now I want to print myself a suit of armor. I might have missed it, what layer height did you use for printing?
The im 6 foot not comment was good
plez make the armored adventures tv show mrk 1
Does the guy have a youtube? so we can see him do the painting and electronics.
No he doesn’t but I’ll do my best to share it
What quality did you use?
How much tho
9:19 did you burn your hand??🤔
It’s an old cut from work
@@FranklyBuilt ouch.🙌👏
how much do you charde to print a suit ?
I don’t haha this was a very unique situation
@@FranklyBuilt i c !
real question is how do you afford all the filament
He buys the cheapest
What happened to the super racer printer you reviewed?
I still have it?
@@FranklyBuilt ah OK. haven't seen it between your printers
Can you print the marvels avengers game iron man suit
Nah lol
@@FranklyBuilt aww
21:20
Do you watch anime? There's a lot of cool things you can make from anime
Did you not see the DBZ in the background? Lol 😂
@@FranklyBuilt oh I did not
How many are you gonna make?
😂
As many as I want lol this isn’t for me tho
Would you make and sell a suit ?
Nah
@@FranklyBuilt that’s unfortunate. You could make bank off of doing that
First