Motion Detection Lights - Easily Install - Cheap DIY Security For Your House - HZ 4132 BK
Вставка
- Опубліковано 15 вер 2024
- If you have a house, you have some exterior lighting AND you have something to protect. To add cheap but highly effective DYI security to your home, change your house lights to motion detection lights. We show you how to easily remove your old light fixture and replace it with a new Heath Zenith motion detection light HZ 4132 BK in just minutes. Quickly change you old outdoor lights for lights that turn on automatically with motion.
Health Zenith motion light are a cheap way to increase your home security and saving electricity. DIY security system for home.
We also explain the basic wiring and how to change any light fixture, inside or outside your home.
We bought this Heath Zenith light fixture on Amazon for just $30 including the motion detection.
Excellent instruction. Thank you very much.
Thanks for the helpful tips and clear instructions.
Thank you Sir for pointing out reaiming the motion sensor
Thanks for sharing. This was very helpful!
Is there a way you cannset it to stay on all the time?
I watched your video after installing the same brand/ different model light. I thought I did something wrong, but found out it was the bulb. A sylvania LED TruWave technology wouldn’t work. An older style bulb worked. By the way, we had the same brass lamps. Good video instructions, thanks.
I also had trouble with the bulb...For some reason the manual says to use an incandescent specifically, instead of for example LED or Incandescent. I did get an LED to work, but not the first LED I tried for unknown reasons. So I would say if one LED bulb doesn't work, just try another brand name.
Be careful some fixtures work better with the rated bulb for the fixture and proper switch for fixture. For example if you get non LED recess cans and try to put led bulbs in the fixtures and a dimmer switch for them guess what’s not going to work properly?????? The lights.
I just installed mine, thank you so much man
Help I have this light but it stay on I’m thinking the sensor is not working
Perfect instructions!
4:06 don’t worry syrnochrcized light fixtures I’m coming to save you from your comfy junction box 😭😭😕😂😂
Can you set these to stay on?
Our lights are way too sensitive on street traffic is there anyway to lower the sensitivity maybe by placing tape over the sensor
What do you do if the switches to change it to test and 5 seconds will not move?
My model 4030 doesn't have a manual mode. I'm stuck with flickering over sensitive sensor.
Is there anyway to have the light on?
Thanks so much! Liked
Love the enthusiasm! I have my lights set to come on dusk to dawn but I’m noticing they’re flickering. I’ve adjusted the sensor, changed the bulbs but still they flicker. They don’t flicker all the time but usually once they come on the flickering starts then slows down.
That is odd. Mine are binary - on or off - no flicker. Do you have any old school incadecent bulbs you can try?
Hi Nancy. So are you saying these lights can be set to automatically come on every night and go off at dawn without the motion defection function? Please let me know. That is what I’m looking for.
@@URTechDotCa I’ve tried dimmable, not dimmable, incandescent and LED and it still happens. I even took the lamps off the wall to make sure they’re wired correctly but clearly I need a professional because it’s driving me crazy
@@SH-jv5uf yes. I purchased them from Lowe’s. They can be set for motion detection and dusk to dawn.
@@bluediamondlover According to the manual (download at Heath-Zenith) a high sensitivity combined with large temperature differences of objects can cause the flickering. If you have an air vent, heater vent or highly reflective surface in the area in front of the light that is probably the issue. Best thing you can do it turn the sensitivity to minimum and possibly turn (to re-aim) the sensor. The manual goes on to day the flickering could be normal operation if heat from other objects is affecting it.
So my landlord installed this but I rather have them on all day because of my light bulb surveillance camera. How do I do that. In the night it works fine but once it’s 8am it sense it’s day light because of the motion detector and has no power lighting the bulb.
How do I make t stay on. It was blinking then stayed on for a few min then wouldn’t detect me when I walked outside to turn it on
Where did you get that square mounting plate so the light stays flush
When the lamp has been installed and placed in test, the lights rapidly flash on and off once motion is detected. Any idea what might cause this, The lights never remain on.
Thank you
You are incorrect in the most important instruction. Some lights are wires to the light before the switch so it’s VERY important to kill the power at the breaker unless you are 100% positive that your light is wired to the switch first. However, you should always get in the habit of shutting off the power at the breaker no matter what. 120 volt AC power can kill.
Can I use the "test" mode to operate lights off and on from interior wall switch and leave motion sensing off?
I would say yes.
How to replace 360 motion sensor?
I really hate how Amazon doesn’t match prices after the purchase rather then returning and buying again to get the items for cheaper
Sorry, when making a video like this, you should ALWAYS tell people to close the circuit breaker.
Hi! What is the red wire for??
The extra wire is connect multiple units together so if the motion is detected from one of the sensors, they all turn on. I do not want that to happen so I did not connect them... but you could.
Good video. You saved some money. I think I can do it myself
next time put some tape on your hand stop you droppin the driver
You just cost the shipper money. Don’t return like that😢
I am not sure what you are talking about. I still have those units on my house and they are working great.