Ok son, just like I tell my son, and my grandfather told me several times. When it comes to your drill bits, High speed steel means slow speed drill, don't get in a hurry, it goes so much faster that way. God bless you, and yours.
Pastor I have been a welder fabricator for over 35 years and companies that I have also been trained on Laths, mills, and surface grinders. You do miticulous detail to your work I can see. I have welders, cutting rig, and all that other stuff I have collected over the years for my trade and do a lot of side work also, I can see you are a very tallented craftsman I entend to make some kind of saw mill myself. Thank you for being so inspiring, but of course thats your other job also as a pastor.
PastorBCoy would you make some plans for it with measurements so its possible to bring the son out and make it here in europe as a father/son project ?
Wacking the shaft in through your bearing pillow blocks like that will make the bearings noisy right from there get go, use tubes that push on the bearing centre onto the shaft, putting the force on the inside race not the balls will keep it as new, hitting the outside race will mess it up
Thanks again for posting videos of your sawmill project. I found a hub like the one you use that fit the go-cart axle I am using for my mill. I just started some welding and I will post videos with my earlier concept and parts videos shortly. I sure hope mine works as good as yours.
ay man. I know the feels with struggling with a blunt drill bit. my heart goes out to you for keeping preservering.. I would have got the shits and beaten someone up by now hahahaha great music bud. I dig it !!!
Hi Pastor, I really like you sawmill and the music that goes with it, I saw on some reviews Satan doesn't like it but that is understandable. I am a missionary in Botswana Africa training church leaders as well as doing some skills. We have lovely Teak wood here. I was wondering if you don't have any plans for your mill that you can sent me. Blessiengs Freddie
You should step drill your holes. Anything from 3/8" and up should have a smaller hole drilled first and the larger the bit the more steps that should be taken to prevent burning up your bit.
Hi PastorBCoy, I am building a mill similar to yours. I noticed some people put an angle adjustment on one tire and others put an adjustment on both (so one of the tires ends up with an angle and a tension adjustment). It looks like you put an adjustment on one tire for angle and an adjustment for blade tension on the other. Is that correct? Or does one tire have two adjustments? Can you elaborate please? Thanks!
Did you have any issues getting the blade to track? The research that I've done suggests the wheels must be "towed" in order for the blade to track. On your sawmill is there some mechanism that accomplishes this?
Hi there, I would like to see how the hinged section is put together. And we're you bought the wheel hub and axle from. Could you also show a more detailed view of the saw mill cheers.
Don't know if you still monitor these comments but I would love to know where you got that flange (6 min. mark) for the tire and what it cost ...thank you
Senhores generais, o povo brasileiro e humilde e desinformado quanto ao crescimento do comunismo no Pais que os senhores tem parte de culpa. Se depender desse povo ir as ruas para que haja uma intervençao militar, nao vai rolar. Mas que a mesma aconteça em virtude do Brasil esta sendo governado por uma facçao criminosa que aparelhou todo Estado. Nao tem como negar tal fato. Os bandidos nao iram chamar a policia. Ate palestra da existencia do foro de Sao Paulo o General Mourao trouxe a tona. Portanto fazer vista grossa aos fatos, so revela Omissao e Prevericaçao das Forças Armadas.
don't drill at full speed it wears your bit out faster I use a variable speed drill and watch the chips, you want curls coming out and I use a bowl with used motor oil and keep dipping drill into bowl. Don't let bit get hot
No one ever told you how to drill a small pilot hole first then use larger drill bits...Damage large drill bits trying to drill a hole from start to finish.
Pastor you look pretty skilled in welding and fabricating do you have to do side work to supplement your income, but none of my business our pastor also does extra work also.
when drilling steel ...punch first ..then pilot ..then step up to finished size ... and use lower speed ... builds up less heat and preserves drill bit ..that was painful to watch !
Hi PastorBCoy, Amazing work! I have to get in line with the others here - where did the axle/hub/wheel assembly come from? It's one of the toughest things to source. Thanks!
+Jim Murphy I built this away from home and was extremely limited in my tool selection. The only drill bit I could find was borrowed from the neighbor. It was as dull as a stick and I had to suffer through it.
Keith Lucas Difficult but works. I was a expert drill sharpener by the time I was 16. Showed lots of kids when we built go carts.. This Old Tony has an excellent vid on that.
@@FFLFFS ...grandfather was a machinist in the Navy...afterwards he owned a hardware store with a machine shop in the back. I got to sort 55 gal drums of stuff swept off the floor from manufacturers of nuts, bolts, washers and other stuff he bought cheap when I was 7 years old. By the time I was 12 a 57 Chevy Bel-Air with a built 327 sat in it built by me. I built a go-kart from scrap with zero welds and completely bolted together and holes drilled everywhere needed. Believe me gramps and my dad taught me well enough to become a master toolmaker building molds and dies for Deutsch.
Ok son, just like I tell my son, and my grandfather told me several times. When it comes to your drill bits, High speed steel means slow speed drill, don't get in a hurry, it goes so much faster that way. God bless you, and yours.
Enjoy your videos and your music.
Классным станок получился и музыка хорошая.
Hadir menyaksikan❤🎉
Pastor I have been a welder fabricator for over 35 years and companies that I have also been trained on Laths, mills, and surface grinders. You do miticulous detail to your work I can see. I have welders, cutting rig, and all that other stuff I have collected over the years for my trade and do a lot of side work also, I can see you are a very tallented craftsman I entend to make some kind of saw mill myself. Thank you for being so inspiring, but of course thats your other job also as a pastor.
Music satisfying!👍
Sorry guys! I've been ill for the last two weeks. I will have part 4 uploaded Sunday May 4th.
PastorBCoy would you make some plans for it with measurements so its possible to bring the son out and make it here in europe as a father/son project ?
k
jimsbix pp
PastorBCoy
Wacking the shaft in through your bearing pillow blocks like that will make the bearings noisy right from there get go, use tubes that push on the bearing centre onto the shaft, putting the force on the inside race not the balls will keep it as new, hitting the outside race will mess it up
Muito bom... bem explicado...didático. Parabéns
Thanks again for posting videos of your sawmill project. I found a hub like the one you use that fit the go-cart axle I am using for my mill. I just started some welding and I will post videos with my earlier concept and parts videos shortly. I sure hope mine works as good as yours.
Parabéns muito bom mesmo 👏👏👏👏👏👏👏👏
ay man. I know the feels with struggling with a blunt drill bit. my heart goes out to you for keeping preservering.. I would have got the shits and beaten someone up by now hahahaha great music bud. I dig it !!!
persevering I think that's how you spell it !!!
amigo esta buena su labor. la próxima ocasión no sufra tanto con las brocas afilarlas es fácil o usas nuevas, felicidades desde Colombia.
Благодарю вас за видео лайк
MUTE IS your friend when the music is crappy. good build.
Hi Pastor, I really like you sawmill and the music that goes with it, I saw on some reviews Satan doesn't like it but that is understandable.
I am a missionary in Botswana Africa training church leaders as well as doing some skills. We have lovely Teak wood here. I was wondering if you don't have any plans for your mill that you can sent me.
Blessiengs
Freddie
Did you know this song is Proverbs and its very cool.
good job but you made drilling a hole look hard just a suggestion use cutting fluid a good drill bit
How is the axle connected to the hub?
You should step drill your holes. Anything from 3/8" and up should have a smaller hole drilled first and the larger the bit the more steps that should be taken to prevent burning up your bit.
hi if you first drill a small hole then the bigger drill will go thru much faster
Will Hatting Yeah, I was away from home, because my house is of solar. Had to barrow that bit. It defiantly could of used a sharpening.
That was my first thought also...first small bit then a bigger... good working!
/Swede
+PastorBCoy less speed more presure + lubrication (from a steel fabricator)
soarin
soaringtractor iı
Simple and peacefull thanks
Can i ask were everyone is getting the bit that bolts to the wheel from or thy custom made
Go cart hub from ebay or amazon
@@PastorBCoy and what side is it please and your wheels
Hi PastorBCoy, I am building a mill similar to yours. I noticed some people put an angle adjustment on one tire and others put an adjustment on both (so one of the tires ends up with an angle and a tension adjustment). It looks like you put an adjustment on one tire for angle and an adjustment for blade tension on the other. Is that correct? Or does one tire have two adjustments? Can you elaborate please? Thanks!
just found my answer in your things to know before video. Thank you!
Interesante maquina...saludos desde Venezuela
Отлично 👍👍👍🇷🇺
Did you have any issues getting the blade to track? The research that I've done suggests the wheels must be "towed" in order for the blade to track. On your sawmill is there some mechanism that accomplishes this?
No, I haven't had a problem with the blade. One of the wheels is on a hinge. A bolt runs through it to control the position of the hinged wheel.
The hinged wheel controls the tracking.
PastorBCoy
Do you think that maybe you could show a video on how the hinged wheel works, I really like your video's, great Job.
Hi there, I would like to see how the hinged section is put together.
And we're you bought the wheel hub and axle from. Could you also show a more detailed view of the saw mill cheers.
Egidio Borg I will post an overview of the sawmill sometime in the next couple weeks. So keep checking in from time to time.
Its best one iv seen
What did you use for wheels and hubs?
Hi, what size is the outer tube compared to the tube it slides up and down on, cheers.
I've got a bunch of wood I need to saw with a bandsaw. Something like this I can make with some of the things in my workshop and my everlast welder.
Don't know if you still monitor these comments but I would love to know where you got that flange (6 min. mark) for the tire and what it cost ...thank you
Parabéns Pastor...
Cool build great work but terrible music ..thought I could just turn it down ....nope mute!!
just saw your video...great jobdo you have a parts list that you can share? it would be greatly appreciated
go to TXDashcovers.com for a basic parts build kit on my sawmill...
hi, where did you get the big pulley wheel?
hello, nice job, your shaft is what size 1 inch or more that goes into your pillow bearing
احسنتم صنعا
Senhores generais, o povo brasileiro e humilde e desinformado quanto ao crescimento do comunismo no Pais que os senhores tem parte de culpa. Se depender desse povo ir as ruas para que haja uma intervençao militar, nao vai rolar. Mas que a mesma aconteça em virtude do Brasil esta sendo governado por uma facçao criminosa que aparelhou todo Estado. Nao tem como negar tal fato. Os bandidos nao iram chamar a policia. Ate palestra da existencia do foro de Sao Paulo o General Mourao trouxe a tona. Portanto fazer vista grossa aos fatos, so revela Omissao e Prevericaçao das Forças Armadas.
And I thought I was the only one who had such an old and heavy grinder.
don't drill at full speed it wears your bit out faster I use a variable speed drill and watch the chips, you want curls coming out and I use a bowl with used motor oil and keep dipping drill into bowl. Don't let bit get hot
+kiddiescripterkiller
The bigger the bit; the slower it should turn and more pressure applied. Always pilot hole with a small bit.
DEUS ABENÇOE, sua inspiração...
bonsoir et bravo pour votre scierie je vais peut-etre prendre modele pour la mienne,j'habite en FRANCE dans les Landes sud ouest .
jeannot lapin Je voudrais suggérer quelques motifications . Je prévois de faire un examen vidéo bientôt. Garder un œil sur elle .
What is the name the cell mechanism where those bearing.
Nice series, but where did you get the tire hubs?
amigo como faço aquela ferramenta mao de força para girar os troncos , rodar levanta etc de lado ?
No one ever told you how to drill a small pilot hole first then use larger drill bits...Damage large drill bits trying to drill a hole from start to finish.
Can anyone help me which music is being played here..... I really enjoyed hearing the music...
what is your email address? I'll send you a copy.
Like. From Russia with love. What the song this video?
Achei muito bom, pena q não se traduziu pro português...obrigado
Could do without the song and background music.... shrug. Machine looks good. Watching you drill holes is painful.
Ronald McCain I like to talk to you bout the bed you took off your golf cart, if your gonna just dith it?
McCain where are you from? I'd like to talk with you,bout the bed you took off the cart?
Pastor you look pretty skilled in welding and fabricating do you have to do side work to supplement your income, but none of my business our pastor also does extra work also.
jedediahbc My ministry is on faith, sometimes I have to do a little work on the side but not always.
il faudrait affûter tes mèches le perçage se ferait mieux 👀👀👀👀👀👍👍👍👍
Pmech
If you want to make eco just use inplix handbooks
excelente video .por fabor me podrias dar plano y medidas para fabricar uno gracias soy de URUGUAY
are you pre- trib,mid-trib, post-trib
De vez en cuando sería bueno afilar las brocas.
bit sharpener is your friend!
You really need sharp drill bits.
Otherwise, looks like a nice build.
O kr e um gênio muito bom
City pantry house thanks
but ...good job in the end !
when drilling steel ...punch first ..then pilot ..then step up to finished size ... and use lower speed ... builds up less heat and preserves drill bit ..that was painful to watch !
Need a sharper drill bit before you damage the drive.
31/07/2016
Good evening
My friend besides like the video, who is the singer who sings this music video.
thanks
vc tem o projeto,as medida desse perfuratris
Goood...!
The drill bit is dull - it does not cut. Change it another- sharp every norec-fool.
A happy New year. I would like to buy a sawmill.
A fúrót illene megélezni. A fúrásod szégyent hoz a szakmára,de az ék behelyezése is "csúnya" volt.
Hi PastorBCoy,
Amazing work!
I have to get in line with the others here - where did the axle/hub/wheel assembly come from? It's one of the toughest things to source.
Thanks!
Alex Khan A mix of ebay, harbor freight, etc. ua-cam.com/video/dbRY528uTRY/v-deo.html
You have to buy new drills ;-)
Usa una broca mas pequeña como guía desespera verte sufrír para hacer una simple perforación..
Bom dia, alguém sabe me dizer o nome destas peças verdes com rolamento?
Wath`s the name of the song?
Jeleh liat ngebornya.
AMEI,MUITO!!!!!!!
Try sharpening your drill bits
Buena
ela
please , buy new drill bit - this is cheap.
научитесь точить сверла или купите острые
hey there cowboy bits you sharpen
Manuel Navarro That bit was a borrowed one. Had a terrible time with it.
am in Ghana
1QQ
graag mozaiek beelden
เจ๋งหว่ะ!!
DonnDIY did a same sawmill(kinda):)
Olá amigo vc poderia mandar pra mim o projeto dessa máquina, porque pretendo fazer uma
Obrigado
Your drilling prowess is terrible lol! Read up on speeds ,pilot holes and lubricants!
+Jim Murphy I built this away from home and was extremely limited in my tool selection. The only drill bit I could find was borrowed from the neighbor. It was as dull as a stick and I had to suffer through it.
+PastorBCoy sharpen them!
@@FFLFFS ....with the angle grinder no less......stuck in a vise or clamped to the frame of whatever you're building.
Keith Lucas
Difficult but works. I was a expert drill sharpener by the time I was 16. Showed lots of kids when we built go carts.. This Old Tony has an excellent vid on that.
@@FFLFFS ...grandfather was a machinist in the Navy...afterwards he owned a hardware store with a machine shop in the back. I got to sort 55 gal drums of stuff swept off the floor from manufacturers of nuts, bolts, washers and other stuff he bought cheap when I was 7 years old.
By the time I was 12 a 57 Chevy Bel-Air with a built 327 sat in it built by me.
I built a go-kart from scrap with zero welds and completely bolted together and holes drilled everywhere needed.
Believe me gramps and my dad taught me well enough to become a master toolmaker building molds and dies for Deutsch.
I thought craftsmen in Russia.
motores de 22
motores de. 250 segunda mano
Sharpen that bit.
esa broca esta ameyada jaja
Afile las mechas!
gostaria de saber se corta eucalipto também e se poderia traduzir pra portugues
Boa
OK............................
Super Bohrer 😂
afila esa mecha