It's been asked a hundred times in the comment section already, but I'll ask again in hopes it catches Vyper's attention. When you access advanced settings under your preset, do the "Bandwidth" items need to be changed or even make a difference? If they do, what would you suggest works best with your COD MW TR preset equalizations? Cheers in advance! Also, just to confirm, should we be using STAR mode on the base station and download the Dolby app and activate Atmos from there? Darcy
Hi Darcy, I believe I've answered this before, but I'll answer and pin since it does come up quite a bit. You're talking about under ADVANCED SETTINGS, the xCF. Mine are 2, 2 and 1.5 What does this mean? They are called CROSSOVER FREQUENCIES. The number range lower (towards the LEFT) indicates the frequency will have a higher left side curve. A number range higher (towards the RIGHT) indicates the frequency will have a higher right side curve. This is a really precision tuning that allows you to edge out even more frequency bias on your headset, assuming the standard waveform doesn't quite do the trick. In my opinion, leaving them dead center is preferred -- some tuners or pre-sets automatically will adjust these to you, but I'd really be surprised if many heard a difference when adjusting them to either extreme. Hope this helps, Jim
Great video!!! Thank you for the helpful settings, clear explanations and enough in game examples to imagine the sound I should expect while playing. Maybe I’ll catch you in Verdansk sometime 😅
Thank you so much for the information. I’ve recently purchased the Astro A50 and I’ve honestly been underwhelmed, hoping this helps with competitive gameplay.
Awesome video!!! question for you, i think your custom preset sounds better also, but after you made changes to your custom preset do you need to make any changes to the advanced settings? It looks like the 1.20b version changes values on both screens equalizer preset and advance settings. Thank you in advanced
@@vypermajik awesome, i have a xbox series x, should i have the headset set to uncompressed and have Dolby set on the head set or should i select windows sonic, Dolby atmos, or dts x? thank you this is a game changer
assuming the advanced settings for the preset that you use for warzone (adjusted one from zalias) is the same as the zalias one you got online? talking about the xCFs
Question about using the Astro splitter for a pair of A50s. So I set it up exactly how Astro’s shown in the instructions. For some reason, the party chat volume is mixed with the game volume because every time I’ve tried to balance it out using the built-in mix on the headphones, both party and game volume change in the same direction! Idk if anyone else is having this issue but you seem the most knowledgeable out of a lot of youtubers I’ve seen. 😫 also, I realize I can change this in the menu by pressing the ps button but that’s a little inconvenient if we bein honest
@@vypermajik, when you gave it off you can’t use both knobs on Mixamp, is that what I’m gathering? I’ve been searching high and low for this info but I can’t seem to find it
This is great. Is it possible to go back to the old firmware? I just bought my A40 TR and did the firmware update right before watching. Also I just bought a Xbox Series and play mostly COD WarZone. Thanks for any feedback.
OMG after trying about 50 audio sets this one is the absolute best, I decided to try the a40 tr's after using a50 for years I could say its much better than the a50 but the sound blew me away in MW and Cold war BUT GUESS WHAT I went even further and changed my astro optical cable with an audioquest optical cable and BOOM its the best sound EVER you got to try DAMN 😍👍🏿
I feel like I’m comment all over the place now haha. Would you recommend also changing the Hz values at the top of the screen as well as the xCF values at the bottom?
I had always assumed the Hz values at the top were presets to let you know what frequency you were looking at and could not be changed. Maybe I'm wrong about this? :-/
I don't know if this has already been asked but, do you adjust your settings within Dolby Atmos or did you use one of the presets? New to PC gaming and trying to make sure I have the right audio settings.
Hello, I picked up the A40 with mixamp today and installed the ACC. My question is i customized all 4 of my EQ presets and i synced them on the ACC, have the EQs saved for my Playstation 5?
If you’re using a MixAmp plugged into the console, the EQs are saved on the MixAmp. So any device you use will allow the EQs to be utilized. Did that answer your question or did I miss something?
For anyone wanting to know this question in the future an Astro rep. on reddit did confirm as long as you are using the optical cable your custom EQs do indeed work via the ACC on Playstation 5.
Would these presets work for a Astro A50 Gen 4 wireless ? Trying them out now along with the Zalias Omnivox EQ preset because I'm struggling to find the right settings. NIce video!
It’s literally on the screen. Like, visually. I’m seeing it. Half of the video is that exact information on the screen. Hz levels - for Astro - is fixed. They can’t be changed. So the ones you see are identical to all Astro products.
Would that recent firmware update be responsible for my mix amp game/voice knob no longer working properly? I've had my Astro a40s since about 2017 never had any issues on my consoles or pc but recently the knob doesn't work for pc. I've tried almost every guide to help fix this, so not sure if rolling back the firmware is possible or if that would even help. Not sure if getting the new mix amp would do anything seeing as I still use the old models.
The actual knob? No, I haven't heard of that before. Firmware... SOMETIMES you can roll it back, never hurts to try. Most devices won't let you, but it won't brick it -- it just won't let you do it. Sorry you're having issues.
I have the astro a50 and I recently updated them for next gen. Im using the Xbox series x, and when I engage the Dolby button on my headset their is no sound difference. It's like I'm getting stero atm - this also applies to my a40's too. Is it my xbox audio settings or possibly my TV settings or is it my astros. Just wondering if you or anyone else isn't getting Dolby from their Astros on next gen. Thanks 👍
@@vypermajik I am using the updated firmware and usb on the front of my series x I'll try the back usb ports if that is the issue, other than that can't think of anything else
I have the a40 tr's with the mixamp and I have the same issue, dolby doesn't work but more importantly my EQ's don't work. I updated the firmware and use the USB only connection with my Series X
@@thunder_season1911 yea thats the issue, no sound difference from any other the preset eq switching on the a50 or a40s. Btw just read that text and I thought you were sendin me a kiss at the end of it after you mentioned the Xbox series x. Lol
@@SeanySimpsony Lmao gotta love how microsoft names their consoles. Update, I was just switching through my 4 preset eq's while at the main menu listening to music and I could tell the difference between them all. I then loaded up cold war and couldn't tell the difference again. So I'm either losing my mind or Cold War is fucked up.
So I switched from PS4 to PC and didn’t change any settings on my astros but for some reason it sounds a bit muffled compared to what I remember it sounding like on PS4. Any reason for this and what should I do? I have dial cranked up pretty high now which I never did on PS4 lol
Hmm. I didn’t notice any differences between PS4 and PC. Basic things to check: What’s the Windows volume set at? Is the Astro set as the default output in control panel? Relaunch Astro command center to verify you’re using the correct EQ presets?
To get the Zeference MW settings does the command center from the Microsoft store need to be used? If not then coping from his settings and then inputting them myself into the command centers EQ which is downloaded from Astro at the moment??
I have the Astros a40s for the PS4 Pro and was wondering if it was normal to able to hear game sound u have to have the left nob in the middle or higher?
Found my way to here after finding comments. Could I please ask what your in game audio settings are for warzone? And do you use the boost on the TR amp. Thanks in advanced man
Hi everyone i bought 1 week ago the astro A40 tdr with the mixamp,i have a ps4 slim and i saw that i need an audio extractor to use the optical audio,i bought it from amazon and fixed everything like astro explain in their video,the problem is that when i am playing specifically call of duty warzone i can clearly hear everything that happen in front of me but nothing thats behind me or to my left and right.Is this how it should work? I changed my mixamp setings and i put the first line all the way down ,do u think is this the problem.please bro can u help me
What am I missing here? when I drag in the file the only preset option I have is the Call of Duty MW TR v1.20b.. where as above, you have ZaliaS and a tournament preset?
Hello HeyoCro - So the A40 holds 4 presets. One of the default ones was “TOURNAMENT” which I never used. So that’s why you see that. I have other presets I have downloaded and tested, some from the website ZEFERENCE and some from others. For COD specifically I really recommend what I showed here, but there are many other EQ presets out there (from Astro and elsewhere). Hope that clarifies :)
Forgot about the most important part, Each number for the HZ is nice but they're all pointless if the Advanced settings number are changed. Also I'd like to use your preset that you like for footsteps and gun sounds. Got the XSX 2 days ago and audio has been a nightmare, Use the astro mixamp with HyperX Alpha headset and ALL my presets got reset from my Xbox one S with the firmware update, I've been all over the internet trying to get my sound quality from before, Used audio presets from someone else that I've used for 2yrs or so with no problems, but can't remember the name of the person who i got them from. Not a cod player like most info, I still play pubg where audio is super important
Forget what I said at the start, I see the numbers at the bottom, For whatever reason youtube had my quality set to 380p on my phone so couldn't tell what any of the numbers 😅.
Only other thing I need from this is the xCF frequencies(3 on the bottom) A link(Screenshot is fine)to your favorite personal one for footsteps games, Also not a fan of the weird sounds by explosions and stuff
@@vypermajikI think what would be helpful is your in-game audio settings (e.g., boost high/low, etc.); the bandwidth xCF values; if you use surround sound; volume level you play with your astros and whatever else! I, along with thousands of other people appreciate you doing this! definitely got my sub and like on this vid! Keep up the good work, much appreciated from the community!
i don't know if i'm missing my answer throughout the video. i've seen the same question i'm about to ask in the comments and it hasn't been answered. i literally just got my Astro A40s yesterday should i be using dolby or the star mode? thanks in advance!
Star mode on the mixamp. If you have dolby available on your console, you can turn it on there. If you have both turned on it will process twice and will sound off
I have issues with mine that I just bought today because if my teammates are running on the right sides the headset sound it stills telling me that they are on my left side which is weird because I had lost so many gun fights because the audio is all over the place its not like my razers special edition you can tell where is the enemy location with my razer but with this a40 you can't tell the location of the enemy nor your friends its driving me crazy
Hey I've been having some problems with my Astros I've been hearing a lot of crackling and popping from them recently. I usually notice it in party's but it's been it gets worse when playing cold war explosions and gunshots can get glitch and distorted do you know what I should do to fix this issue?
@@vypermajik sorry for the late response. I've tried all of these except trying a different headset. I had a power outage while using my headset recently do you think they might have gotten damaged? Edit: I just tried it with a different headset and cord I got the same results I'm guessing it may be the game or my xbox
@@vypermajik appreciate the help. Your video was very clear and concise. Just one last question, what column would you suggest adjusting to reduce the tinny/high pitched level. Sometimes it gets over powering and actually makes it difficult to play for longer periods. I’m just unsure which one to reduce or increase and with the hz levels should I adjust these or keep them as is and move the column level.
What about in-game though. Which audio setting do I use with the 1st configuration in your video? I currently use the 'Boost high' setting. Does it matter?
Good morning, I've tried several settings to find one for the game I like and love to play, Warface, but I can't configure a preset for it, could you help me, create a preset for Warface, or tell me what each of these Gray bars do in equalization, so I can try more and more. Thanks
It's been asked a hundred times in the comment section already, but I'll ask again in hopes it catches Vyper's attention. When you access advanced settings under your preset, do the "Bandwidth" items need to be changed or even make a difference? If they do, what would you suggest works best with your COD MW TR preset equalizations? Cheers in advance!
Also, just to confirm, should we be using STAR mode on the base station and download the Dolby app and activate Atmos from there?
Darcy
Hi Darcy,
I believe I've answered this before, but I'll answer and pin since it does come up quite a bit. You're talking about under ADVANCED SETTINGS, the xCF. Mine are 2, 2 and 1.5 What does this mean?
They are called CROSSOVER FREQUENCIES. The number range lower (towards the LEFT) indicates the frequency will have a higher left side curve. A number range higher (towards the RIGHT) indicates the frequency will have a higher right side curve. This is a really precision tuning that allows you to edge out even more frequency bias on your headset, assuming the standard waveform doesn't quite do the trick.
In my opinion, leaving them dead center is preferred -- some tuners or pre-sets automatically will adjust these to you, but I'd really be surprised if many heard a difference when adjusting them to either extreme.
Hope this helps,
Jim
@@vypermajik That's perfect mate, and thank you for the super quick reply. I'm sure a truck load of people will find this information useful.
vypermajik $
@@vypermajik hello are you on pc everyone I see is for pc or ps4 and they don’t seem to work as well for Xbox one
I'm so happy I finally found something recent. Thank you
Thanks for sharing this, I wasn’t aware of this site, great to have settings for cinematic games and movies
Yeah these settings are what I've been missing! Thank you
Glad it helped! 👍
Great video!!! Thank you for the helpful settings, clear explanations and enough in game examples to imagine the sound I should expect while playing. Maybe I’ll catch you in Verdansk sometime 😅
Thanks for the video man! Will give this a try.
Thank you so much for the information. I’ve recently purchased the Astro A50 and I’ve honestly been underwhelmed, hoping this helps with competitive gameplay.
Yeah, definitely will help your gameplay Manny.
awesome vid, what's the bandwidth "xCF" that you use on the 2nd pre-set that you show?
This video was supper helpful thanks man keep it up !!!! Checked out the website and it has everything I was looking for
Excellent 😎
Just updated my eq to your presets and people think I have walls lol works great thanks man
Hi Alexdandro: super happy to hear it helps. It's always nice to get the most out of your investment and you'll be smashing fools in no time. :)
which one did you use? the one on the website or his modified preset?
Awesome video!!! question for you, i think your custom preset sounds better also, but after you made changes to your custom preset do you need to make any changes to the advanced settings? It looks like the 1.20b
version changes values on both screens equalizer preset and advance settings. Thank you in advanced
Hi! I didn’t change anything and it still sounds solid. I’m really glad they helped.
@@vypermajik awesome, i have a xbox series x, should i have the headset set to uncompressed and have Dolby set on the head set or should i select windows sonic, Dolby atmos, or dts x? thank you this is a game changer
assuming the advanced settings for the preset that you use for warzone (adjusted one from zalias) is the same as the zalias one you got online? talking about the xCFs
would also like to know
great video. Thank you!
Question about using the Astro splitter for a pair of A50s.
So I set it up exactly how Astro’s shown in the instructions. For some reason, the party chat volume is mixed with the game volume because every time I’ve tried to balance it out using the built-in mix on the headphones, both party and game volume change in the same direction! Idk if anyone else is having this issue but you seem the most knowledgeable out of a lot of youtubers I’ve seen. 😫 also, I realize I can change this in the menu by pressing the ps button but that’s a little inconvenient if we bein honest
You on console or pc ? Use the optical cable helps split the audio.
Just dropped a sub thanks so much for all the detail! One more question, Dolby on or off?
Awesome! On. It may sound a bit tinny at first but give it some time to adjust. It’s amazing depth of sound.
@@vypermajik, when you gave it off you can’t use both knobs on Mixamp, is that what I’m gathering? I’ve been searching high and low for this info but I can’t seem to find it
You don't show advanced settings, though? My first time messing with my astro a40 because I forgot about the updates/command center
This is great. Is it possible to go back to the old firmware? I just bought my A40 TR and did the firmware update right before watching. Also I just bought a Xbox Series and play mostly COD WarZone. Thanks for any feedback.
Hi Shawn. I don’t think so but it doesn’t hurt to try.
hi do u turn dolby on or star??? and in the control panel for the sound which one u using thanks
Bro put up your advanced settings for the one you play cold war on if you can
Second this
OMG after trying about 50 audio sets this one is the absolute best, I decided to try the a40 tr's after using a50 for years I could say its much better than the a50 but the sound blew me away in MW and Cold war BUT GUESS WHAT I went even further and changed my astro optical cable with an audioquest optical cable and BOOM its the best sound EVER you got to try DAMN 😍👍🏿
Where were u able to find that extra optical at?
@@chavapenaloza9628 amazon it cost an arm and a leg but its worth it check it out audioquest hdmi coffee cable
@@frizzbee416 is it a hdmi or optical?
@@chavapenaloza9628 oops optical typo 😅
how much is the cable ?
Would highly recommend!
Thanks for sharing! One question, are you using your headphones in Dolby or star mode in your mixamp?
Hi Liko Young,
Dolby is always disabled for me. It sounds much cleaner without it enabled.
Do you have dolby digital 3d audio on or off
@Manny Nieto don’t use these settings anymore. It’s not that great in my opinion
I feel like I’m comment all over the place now haha. Would you recommend also changing the Hz values at the top of the screen as well as the xCF values at the bottom?
I had always assumed the Hz values at the top were presets to let you know what frequency you were looking at and could not be changed. Maybe I'm wrong about this? :-/
ty sooo mush man
I was going to ask you about this - thank you for sharing !! :-D
No problem 😊
I don't know if this has already been asked but, do you adjust your settings within Dolby Atmos or did you use one of the presets? New to PC gaming and trying to make sure I have the right audio settings.
Hey man thank you for making this! I was just wondering if your using dolby atmos or nothing for spacial sound.
My pleasure!
@@vypermajik dobly atmos or no????
is this for modern warfare 2? also is it on mix amp pro? feel there is just to much bass in the headset
Do you use the surround sound on for the headset?
Hello, I picked up the A40 with mixamp today and installed the ACC.
My question is i customized all 4 of my EQ presets and i synced them on the ACC, have the EQs saved for my Playstation 5?
If you’re using a MixAmp plugged into the console, the EQs are saved on the MixAmp. So any device you use will allow the EQs to be utilized. Did that answer your question or did I miss something?
For anyone wanting to know this question in the future an Astro rep. on reddit did confirm as long as you are using the optical cable your custom EQs do indeed work via the ACC on Playstation 5.
Would these presets work for a Astro A50 Gen 4 wireless ? Trying them out now along with the Zalias Omnivox EQ preset because I'm struggling to find the right settings. NIce video!
I just spent a few minutes inputting these EQ's in my Gen 4 A50. Super crisp and works a charm!
Why do you do tutorial videos and leave out all the important details like the Hz level and xcf numbers..?
It’s literally on the screen. Like, visually. I’m seeing it. Half of the video is that exact information on the screen.
Hz levels - for Astro - is fixed. They can’t be changed. So the ones you see are identical to all Astro products.
Would that recent firmware update be responsible for my mix amp game/voice knob no longer working properly? I've had my Astro a40s since about 2017 never had any issues on my consoles or pc but recently the knob doesn't work for pc. I've tried almost every guide to help fix this, so not sure if rolling back the firmware is possible or if that would even help. Not sure if getting the new mix amp would do anything seeing as I still use the old models.
The actual knob? No, I haven't heard of that before.
Firmware... SOMETIMES you can roll it back, never hurts to try. Most devices won't let you, but it won't brick it -- it just won't let you do it. Sorry you're having issues.
Hey i noticed this video was posted a while back and was wondering if you got any updates on some of the sound settings that you like now
Hi Danny, I still use these settings. “If it ain’t broke..”
Whats the bandwidth you use for your personal eq the first one?
Hey man, what do you have your astro headset volume at and what do you have your windows volume at (for the cod program running)?
I have the astro a50 and I recently updated them for next gen. Im using the Xbox series x, and when I engage the Dolby button on my headset their is no sound difference. It's like I'm getting stero atm - this also applies to my a40's too. Is it my xbox audio settings or possibly my TV settings or is it my astros. Just wondering if you or anyone else isn't getting Dolby from their Astros on next gen. Thanks 👍
Hi Sean,
Are you using the updated firmware and a USB-only connection?
@@vypermajik I am using the updated firmware and usb on the front of my series x I'll try the back usb ports if that is the issue, other than that can't think of anything else
I have the a40 tr's with the mixamp and I have the same issue, dolby doesn't work but more importantly my EQ's don't work. I updated the firmware and use the USB only connection with my Series X
@@thunder_season1911 yea thats the issue, no sound difference from any other the preset eq switching on the a50 or a40s. Btw just read that text and I thought you were sendin me a kiss at the end of it after you mentioned the Xbox series x. Lol
@@SeanySimpsony Lmao gotta love how microsoft names their consoles. Update, I was just switching through my 4 preset eq's while at the main menu listening to music and I could tell the difference between them all. I then loaded up cold war and couldn't tell the difference again. So I'm either losing my mind or Cold War is fucked up.
Where do i turn off surround sound on my a40s?
So I switched from PS4 to PC and didn’t change any settings on my astros but for some reason it sounds a bit muffled compared to what I remember it sounding like on PS4. Any reason for this and what should I do? I have dial cranked up pretty high now which I never did on PS4 lol
Hmm. I didn’t notice any differences between PS4 and PC. Basic things to check:
What’s the Windows volume set at?
Is the Astro set as the default output in control panel?
Relaunch Astro command center to verify you’re using the correct EQ presets?
You the man!
To get the Zeference MW settings does the command center from the Microsoft store need to be used? If not then coping from his settings and then inputting them myself into the command centers EQ which is downloaded from Astro at the moment??
Great video nut what are the advanced setting numbers please
I have the Astros a40s for the PS4 Pro and was wondering if it was normal to able to hear game sound u have to have the left nob in the middle or higher?
Found my way to here after finding comments. Could I please ask what your in game audio settings are for warzone? And do you use the boost on the TR amp. Thanks in advanced man
ua-cam.com/video/Ba3lhLVHJ6M/v-deo.html
@@vypermajik isn’t this just a link to this video lol
@@vipespcxbox6012 he didn’t watch the vid
Hi everyone i bought 1 week ago the astro A40 tdr with the mixamp,i have a ps4 slim and i saw that i need an audio extractor to use the optical audio,i bought it from amazon and fixed everything like astro explain in their video,the problem is that when i am playing specifically call of duty warzone i can clearly hear everything that happen in front of me but nothing thats behind me or to my left and right.Is this how it should work? I changed my mixamp setings and i put the first line all the way down ,do u think is this the problem.please bro can u help me
Be the Audio GUY!!! ✊✊✊
I’ve been trying to look for good settings for so long fingers crossed my team mates footsteps and reloads don’t mix with the enemies too well 🥴
This is the best! ❤️ Thank you
What am I missing here? when I drag in the file the only preset option I have is the Call of Duty MW TR v1.20b.. where as above, you have ZaliaS and a tournament preset?
Hello HeyoCro -
So the A40 holds 4 presets. One of the default ones was “TOURNAMENT” which I never used. So that’s why you see that.
I have other presets I have downloaded and tested, some from the website ZEFERENCE and some from others.
For COD specifically I really recommend what I showed here, but there are many other EQ presets out there (from Astro and elsewhere).
Hope that clarifies :)
@@vypermajik it does. Thank you!
Forgot about the most important part, Each number for the HZ is nice but they're all pointless if the Advanced settings number are changed. Also I'd like to use your preset that you like for footsteps and gun sounds. Got the XSX 2 days ago and audio has been a nightmare, Use the astro mixamp with HyperX Alpha headset and ALL my presets got reset from my Xbox one S with the firmware update, I've been all over the internet trying to get my sound quality from before, Used audio presets from someone else that I've used for 2yrs or so with no problems, but can't remember the name of the person who i got them from. Not a cod player like most info, I still play pubg where audio is super important
Forget what I said at the start, I see the numbers at the bottom, For whatever reason youtube had my quality set to 380p on my phone so couldn't tell what any of the numbers 😅.
Only other thing I need from this is the xCF frequencies(3 on the bottom) A link(Screenshot is fine)to your favorite personal one for footsteps games, Also not a fan of the weird sounds by explosions and stuff
I suggest doing another video for 2021........I think the information is still relevant but why not?
Okay, ask and you shall receive. I’ll work on this soon. :)
@@vypermajikI think what would be helpful is your in-game audio settings (e.g., boost high/low, etc.); the bandwidth xCF values; if you use surround sound; volume level you play with your astros and whatever else! I, along with thousands of other people appreciate you doing this! definitely got my sub and like on this vid! Keep up the good work, much appreciated from the community!
can u show the advanced settings pls? MW settings? boost high?
MW settings are the same . . .
Boost High! yes.
Any recommendations for astro a50 for siege and cold War 2022?
In advanced setting what are the last 3 numbers at the bottom for your personal
Does anybody know which Audio Mix in the game sound settings do I have to use ?
I tried all these and still can’t hear footsteps till the last second.
Are u using boost hight boost low with these setting when your playing warzon
goodjob
hi just tried 2 go to your webpage and its not showing up
i don't know if i'm missing my answer throughout the video. i've seen the same question i'm about to ask in the comments and it hasn't been answered. i literally just got my Astro A40s yesterday should i be using dolby or the star mode? thanks in advance!
Star mode on the mixamp. If you have dolby available on your console, you can turn it on there. If you have both turned on it will process twice and will sound off
@@StreetDemon96 Agreed!
What is your balanced preset? Say for general gaming single player games etc
Thank
;)
Hey u did not mention the bandwidth on your call of duty best setting
Hi, I'm very confused. What's the bandwidth of what? Do you mean what's the best waveform? Or are you talking about a specific frequency?
@@vypermajik bandwidth for your call of duty coke war best Astro settings. It was posted 3 months ago u never listed ur bandwidth for preset 2
@@vypermajik it is in advanced settings of the EQ
PLEASE HELP /// A40 TR ..... SORROUND SOUND OR NOT ? I FEEL ITS TRASH
I have issues with mine that I just bought today because if my teammates are running on the right sides the headset sound it stills telling me that they are on my left side which is weird because I had lost so many gun fights because the audio is all over the place its not like my razers special edition you can tell where is the enemy location with my razer but with this a40 you can't tell the location of the enemy nor your friends its driving me crazy
Maybe you have the headsets on the wrong way lmao
@@needys2950 I fixed it
Is the website no more? The link doesn't work
Man you recommend ti use the dolby or not?
how do you reset astro a50 settings to default?
Can I use the software without the MixAmp?
Can I download the command center in a HP Laptop
microsoft store
are these settings for ps5? also do the eq presets work on ps5? and do i have it on the star or the headphones on the top of eq preset on the mixamp.
Yeah any version of the game. Ps5, PC, Xbox
@@vypermajik i just bought the a40s... you think they are trash? should i return them ?? and do you use it on ps5?
You use star or the dolby surround?
I always DISABLE Dolby Surround Sound toggle on my MixAmp.
Hello any way to turn party chat up on Astro can’t here party chat that well?
If you're using the MixAmp, turn the knob. If you're on PlayStation 5, there is a toggle for audio between game and voice chat.
I want to be able to hear from 5 meters away
👍🏻🔥
is the link down?
where can i download it?
Hey I've been having some problems with my Astros I've been hearing a lot of crackling and popping from them recently. I usually notice it in party's but it's been it gets worse when playing cold war explosions and gunshots can get glitch and distorted do you know what I should do to fix this issue?
Check cables, try headset without MixAmp, then try different headphones in MixAmp to diagnose where issue is.
@@vypermajik sorry for the late response. I've tried all of these except trying a different headset. I had a power outage while using my headset recently do you think they might have gotten damaged?
Edit: I just tried it with a different headset and cord I got the same results I'm guessing it may be the game or my xbox
@@slavicdoge4427 I have the same problem
Why you dont get into the Advanced settings of the profile? So we can copy
That’s them
You're one of the extremely few people I've seen that likes Cold War😂😂😂😂
What are your cod audio settings?
Do I have to change anything in the advance settings with your warzone settings ?
I'd consider dropping off the in-game music to hear the game better, but no... that's up to you/your personal preferences.
@@vypermajik wow the footsteps are clear, great work mate
Do you use the Dolby Atmos settings along with the EQ?
Do you mean Atmos on Xbox? As in, the add-on?
@@vypermajik I mean the atmos on PC, along with the button for either Dolby Atmos or standard EQ on the headset if that makes sense.
Hey I’m having a issue with my Astro a40 and the Astro amp can i send you a video and you check it out?
Sure, what can I help with?
what is audio setting inside the game i use boost low?
yes boost low is the best one and if you play warzone then legacy mode is better.
cold war is dynamic
What in game sound setting do you use with these eq settings?
CW: Treyarch Mix
MW/WZ: Boost High
Good luck :)
@@vypermajik appreciate the help. Your video was very clear and concise. Just one last question, what column would you suggest adjusting to reduce the tinny/high pitched level. Sometimes it gets over powering and actually makes it difficult to play for longer periods. I’m just unsure which one to reduce or increase and with the hz levels should I adjust these or keep them as is and move the column level.
what are you Bandwidth xCF number?
hey guys... are you using the surround in yours astros?
I disable Dolby Surround sound.
Should i turn off 3d audio when i play cold war and warzone?
YES!
@@vypermajik ok thanks. Didn't know if tempest 3d audio was good or nah.
where i can turn off this 3d audio? u mean dolby?
do you use optical cord or no? for pc
Mauron, yes, I do. Optical from SoundBlaster Z to MixAmp.
Do these settings work on the A50s? Thanks
Yes, they should support the A50s as well.
The file is incompatible with device bro
Do I need a mix amp for these settings??
Yes, the settings are done on the MixAmp.
Are you able to get 120fps using the HDMI splitter on ps5?
I've heard yes and no. I don't have a 120 Hz TV to verify this but I've read it DOES work at 120 Hz, just only at 1080P.
I use the splitter and on my monitor it works at 120 fps
@@zackabt2277 Thats great! Thank bro
@@vypermajik I can confirm just got the Astro admi adapter for ps5 and it shows 1080p 120hz on my monitor
@@MrJohnnyt123 you don’t need that if you have tv you can do 4K 120fps without sacrifice resolution oh color format
What about in-game though. Which audio setting do I use with the 1st configuration in your video? I currently use the 'Boost high' setting. Does it matter?
For me: I use BOOST HIGH. It makes the highs even louder (foot steps)
Good morning, I've tried several settings to find one for the game I like and love to play, Warface, but I can't configure a preset for it, could you help me, create a preset for Warface, or tell me what each of these Gray bars do in equalization, so I can try more and more. Thanks
Why not show the exact settings for your “cheating” eq nobody knows the bandwidth or any of that the numbers do nothing without the rest
What part did you need to see? I'll gladly show you whatever you'd like.
Surround sound on or off?
I recommend off. It didn’t seem to help much.
Surround sound on or off
Off.
Dobly on or off?
I leave it on (MixAmp).