I’m a machinist in America. I don’t know shit about axles, but I do know machining and honestly I’ve seen guys do worse with more here. I think looking at the broken piece after they got it off, you can see it was cracked about 25% of diameter for awhile before it finally failed catastrophically. It probably costs about $25 for these guys to make this repair vs multiple thousands for a new axle. While their trucks are overloaded, they’re not driven at anywhere near their rated top speed for load. Carrying 20 tons at 65mph and hitting potholes is a lot more dynamic than carrying 35 tons at 25mph. Again, idk wtf I’m talking about. But I’m just thinking out loud. If these repairs didn’t last enough for them to be worth doing, they wouldn’t do them. They might be poor and their conditions are horrible, but they definitely aren’t stupid. I’d happily hire any of these guys for a shop.
I totally disagree with everything you say. That repair won't last 6 months. But these guys don't give a shit. Once you've paid for the repair there's no come back.
@@adybarker4733 6 months is more than no months. I think it’s really condescending to assume the guys paying for these services are some kind of ignorant idiots who don’t understand what kind of service they’re getting. Obviously these repairs will never be as good as the original part. But what’s the option? I’m sure the truck owner has his entire livelihood and every cent they had to their name tied to that truck. A new axel is probably 4x what they make in a year.
@@adybarker4733und wenn die Reparatur nur 5 Monate hält wird einfach nochmal repariert. Und wird solange gemacht bis absolut nichts mehr geht. Die Menschen in Pakistan sind arm. Für andere Reparaturen und Ersatzteile fehlt das Geld. Immerhin sehe ich hier zum ersten Mal einen Messschieber im Einsatz und einen Arbeiter der seine Drehbank pflegt. Absolut Top für pakistanische Verhältnisse
@@adybarker4733 Get out of here 🤡, cost of labor is much cheaper in 3rd world countries and trying to buy a new part would be cost prohibited. Stay in your ignorant lane
First one I've seen too. Usually they are filtyy dirty. This looks like it might hold with the screw threads in addition to the weld. It's not like they are doing 90 on the highways.
As someone watching from the US • Watching your videos is most relaxing even at 2 x speed. Hope your customers appreciate the skill talent and dedication of your workers for this very important job for the community • It’s good to see how well you understand the process of restoring shafts to get the job done efficiently - loads of experience is evident with this skilled set of workers • Watching your people doing a great job make me think there is hope for the other parts of society who don't even try to have a job. Your crew is a great role model for all of us • Thanks so very much for posting and sharing! All the best and God Bless. 🇺🇸
yeah, third world mentality gives third world result, that is for sure. ITs not even a matter of material or wealth, even poor you can keep a wrokshop clean, not work bare feet, not drag the ball bearing in dirt and sand, measure, and learn to do things properly.
I would like to say, you do great work l have never seen such great work people here in America can't compare to you, and they have all the tools, keep up the great work.
Their welding skills have greatly improved over the years, looks like a solid repair, now if it wasn't overloaded again it might last longer. You have some new equipment in your shop, but nobody wants to invest in a good welding helmet instead of having to hold the face shield in their hand. You know if you take all of the decorations off of the truck you might be able to carry more weight. When I worked at a Mack Truck dealership we delivered a Schwing concrete boom truck used to pump concrete to upper floors of a building, the paint added over 3,000 pounds to the weight of the truck, I wonder how much weight just the front bumper adds to that truck. I notice that there are now Mack brand trucks over there, they build a standard dump truck chassis that carry up to 85,000 lbs on 10 tires and they also build and 800 series that has a 25,000 front axel and 100,000 rear axels all on 10 tires.
I like the fixture for removing the support from the cross piece. I wonder if that is a specialty Hino tool fixture? 🙂 PS: It looks like it has been repaired once before. PPS: The machinist is incredibly gifted.
i imagine its rare that breaks like these happen in western countries as trucks are not allowed to be overloaded also if you could repair something as good as new in this situation which i doubt you would have to be a little more creative and thorough requiring more thought,better materials and processes,it wouldnt be done because it wouldnt pass a test even if they could analyse the integrity of the repair to match a new part
The leaf springs have almost flattened hence load on axle. Given the situation they have done a good job. But in my opinion leaf springs should go under hydraulic press for bending and a new axle will be cheaper in the long run. But as they say maybe due to financial constraints the owner is forced to make do with repairs. All the best guys
theres a saying in my language, it's basically "the cheap stuff is the most expensive" meaning, if you put cheap parts, they will fail or not work properly and you'll have to pay the cost of fixing plus getting another part, sometimes thats the only thing you can do
That truck origionally had 6 leaves in the axle spring assembly. They just keep adding springs and overloading everything they have. That spring pack was 3 feet thick
Красавчики, разговору нет. Не плохо сделали. Не зря время потратил. Но, вот варить голыми руками 😂😂😂 это конечно заслуживает отдельного респекта. Отчаянные типы.
@@kolshix во во в советское время ремонтировали все а сейчас давайте новую запчасть мы вам поменяем . ранше в магазин пришёл притащил образец продавец штангельциркуль достал и начал подбирать что похоже . а сейчас вин код давай че ты мне суешь деталь , обленились матчасть не знают
А что такое случилось? Нарядный станок, чистые работники, даже новый штангель вместо крон циркуля. Даже фломастер купили) ) Но токарю всё равно зачёт. Всё легко и по красоте сделал. Зато сварщик порадовал стабильностью, самый толстый гнутый электрод - всё как мы любим.)
Meine höchste Bewunderung und Respekt vor der excellenten Arbeit, welche diese Mechaniker leisten! Einen Punkt der Kritik muss ich vorbringen! Beim Schweissen in der Drehbank ist das Massekabel (Ground) nicht direkt am Werkstück angeschlossen sondern irgendwo an der Drehbank! Der Schweiß Strom fliesst durch die Maschine und alle Kugellager! 4 mm Rod und 140 Ampere ! In den Kugellagern gibt es elektrische Lichtbogen und diese werden dadurch zerstört!
Stimmt schon! Mich erstaunt immer wieder, welche Genauigkeit die Leute mit diesen ausgeleierten Maschinen erzielen. Ich meine, die schrecken auch nicht davor zurück auch die Lager nicht zu tauschen, sondern durch Ersetzen der Kugeln und Polieren der Laufflächen zu reparieren.
11:19 lol, that tool is not even thightened correctly we can see the last stud is turning with the effort. They are really good at rushing a sh*tty job here. On the end result, the surface finish is so smooth, and its turning so round. Of course throwing and draging the part in the dirt is always a nice end touch.
I'm always surprised by the fine craftsmanship of these men working with ancient, nearly worn out tools under conditions that would cause most westerners to quit their jobs.
You put the repair at the highest-stress point of the part. If you made a new stub end for the axle and placed the welded area a couple of cm outboard from the inner side of the cylindrical section of the axle, you'd be in a lower-stress area of the axle and the repair would have a better chance of holding up. Also, by drilling and threading a rod in the middle, you created a stress riser that will make another break in the same area more likely. You're better off in this situation to bevel the ends of the shaft that you plan to weld, then fixture it to maintain concentricity and weld the entire cross section with no rod or pin in the middle. Not only would this be stronger, but it's faster than machining threads to hold the parts together. Finally, when you cut threads, you should consider setting your compound to 60 degrees rather than oriented parallel to the lathe bed, which lets you cut with only one flank of the tool, allowing the chips to flow out of the cut much better and giving you a good finish on your threads. When you set it up this way, you know when you're done when you've moved the compound in (or out, in the case of internal threads) by a distance equal to your thread pitch - if you're cutting 1.5mm threads, you move the compound 1.5mm and you're at depth. Make a couple of spring passes (passes where the tool is put at the final depth, which removes any leftover material that didn't get cut due to tool or workpiece deflection) and you're done, and your threads should be as close to in-spec as you can get them without measuring them over wires.
no need to waste your time with advise for these guys, they just have third world mentality and technics, its not going to change, evenif they had the proper tool and setup, it would end up bare feet or in sandal, with the balll bearings on the dirt and sand.
So it’s broken before, been welded up, then now broken again, so we just do the same failed thing on the even more messed up fragments? What thought process is this?
You are doing some good work, but I don't think you should be using hollow inserts to join the pieces together as the repair is prone to failure. Next time please use a solid piece of steel, thanks
OSHA is for Americans who forgot how to make things and pander to the requirements of insurance companies, who in turn pander to their shareholders. It’s a body that doesn’t give two f*cks about worker safety, only not paying out money in calima and maximising profits. Wake up you dullards!
The screw-in type of repair has definitely taken hold with these men and is probably the best way to make this type of correction. But if it happens twice, time for a new axel. 😊
WHAT IMPRESSED ME, IS AS A MECHANIC AND WELDER. I HAVE SHIT LOADS OF TOOLS, SOMETIMES FEEL LIKE I DON'T HAVE ENOUGH. YET THESE HOME BOYZ HAVE LIKE FOUR TOTAL TOOLS , AND CAN COMPLETELY TEAR DOWN A TRUCK, AND PUT IT BACK TOGETHER. WITH THAT SMALL AMOUNT OF TOOLS. SORRY SNAP ON. YOU'RE OUT OF BUSINESS 😂😂😂. GREAT JOB BROTHERS
They sure do a lot with very little.. fantastic . adaptation and inguity.. ..it would look much better not to throw completed machined parts on the ground.
no wonder the shaft get´s overloaded with all the bling that decorates these trucks
I’m a machinist in America. I don’t know shit about axles, but I do know machining and honestly I’ve seen guys do worse with more here. I think looking at the broken piece after they got it off, you can see it was cracked about 25% of diameter for awhile before it finally failed catastrophically. It probably costs about $25 for these guys to make this repair vs multiple thousands for a new axle. While their trucks are overloaded, they’re not driven at anywhere near their rated top speed for load. Carrying 20 tons at 65mph and hitting potholes is a lot more dynamic than carrying 35 tons at 25mph. Again, idk wtf I’m talking about. But I’m just thinking out loud. If these repairs didn’t last enough for them to be worth doing, they wouldn’t do them. They might be poor and their conditions are horrible, but they definitely aren’t stupid. I’d happily hire any of these guys for a shop.
I totally disagree with everything you say. That repair won't last 6 months. But these guys don't give a shit. Once you've paid for the repair there's no come back.
@@adybarker4733 6 months is more than no months. I think it’s really condescending to assume the guys paying for these services are some kind of ignorant idiots who don’t understand what kind of service they’re getting. Obviously these repairs will never be as good as the original part. But what’s the option? I’m sure the truck owner has his entire livelihood and every cent they had to their name tied to that truck. A new axel is probably 4x what they make in a year.
well said 👍
@@adybarker4733und wenn die Reparatur nur 5 Monate hält wird einfach nochmal repariert. Und wird solange gemacht bis absolut nichts mehr geht. Die Menschen in Pakistan sind arm. Für andere Reparaturen und Ersatzteile fehlt das Geld. Immerhin sehe ich hier zum ersten Mal einen Messschieber im Einsatz und einen Arbeiter der seine Drehbank pflegt. Absolut Top für pakistanische Verhältnisse
@@adybarker4733 Get out of here 🤡, cost of labor is much cheaper in 3rd world countries and trying to buy a new part would be cost prohibited. Stay in your ignorant lane
At least this machinist keeps his equipment clean.
First one I've seen too. Usually they are filtyy dirty. This looks like it might hold with the screw threads in addition to the weld. It's not like they are doing 90 on the highways.
As someone watching from the US
• Watching your videos is most relaxing even at 2 x speed. Hope your customers appreciate the skill talent and dedication of your workers for this very important job for the community
• It’s good to see how well you understand the process of restoring shafts to get the job done efficiently - loads of experience is evident with this skilled set of workers
• Watching your people doing a great job make me think there is hope for the other parts of society who don't even try to have a job. Your crew is a great role model for all of us
• Thanks so very much for posting and sharing!
All the best and God Bless. 🇺🇸
There’s a lesson to be learnt here: namely the actuality is a reflection of the reality in that country 😊😊😊
yeah, third world mentality gives third world result, that is for sure. ITs not even a matter of material or wealth, even poor you can keep a wrokshop clean, not work bare feet, not drag the ball bearing in dirt and sand, measure, and learn to do things properly.
Это ненастоящие пакистанцы, на которых нам так нравится смотреть и восхищаться. Эти в обуви, и с какими то инструментами)))
Скорее всего,это официальный дилер!У них есть гайковёрт!!!!
They can afford them now after making videos
I would like to say, you do great work l have never seen such great work people here in America can't compare to you, and they have all the tools, keep up the great work.
Pakistani truck driver buys a 20 tonne truck and thinks... "let's put 40 tonne on it! It will be fine!"
Nah i bet it was more than 2 times the max load that was in this truck documentation. ;)
actually 40 ton is if they lack of cargo, normal case would be more 60 tonnes.
@@Bialy_1There was no truck documentation. I would bet money.
Потому что друг, мотор стучит, а ехать надо! 🤣
Must be a common repair as they have special tools for the job.
Thật tài giỏi những người làm công này. Very good.
Their welding skills have greatly improved over the years, looks like a solid repair, now if it wasn't overloaded again it might last longer.
You have some new equipment in your shop, but nobody wants to invest in a good welding helmet instead of having to hold the face shield in their hand.
You know if you take all of the decorations off of the truck you might be able to carry more weight.
When I worked at a Mack Truck dealership we delivered a Schwing concrete boom truck used to pump concrete to upper floors of a building, the paint added over 3,000 pounds to the weight of the truck, I wonder how much weight just the front bumper adds to that truck.
I notice that there are now Mack brand trucks over there, they build a standard dump truck chassis that carry up to 85,000 lbs on 10 tires and they also build and 800 series that has a 25,000 front axel and 100,000 rear axels all on 10 tires.
Следующая мастерская через три километра😂
Ukrainians despise him, Russians appreciate him. No wonder you were attacked by Russia😂😂😂
похоже эту часть уже не раз переваривали
I like the fixture for removing the support from the cross piece. I wonder if that is a specialty Hino tool fixture? 🙂
PS: It looks like it has been repaired once before.
PPS: The machinist is incredibly gifted.
In western countries refurbishing it would out priced the cost of new. Thanks for a nice video.
i imagine its rare that breaks like these happen in western countries as trucks are not allowed to be overloaded also if you could repair something as good as new in this situation which i doubt you would have to be a little more creative and thorough requiring more thought,better materials and processes,it wouldnt be done because it wouldnt pass a test even if they could analyse the integrity of the repair to match a new part
Ta de parabéns homem gostei muito desse vídeo parabéns
Good work on lathe
С их соревнованиями , кто больше перегрузит эта работа не надолго.
Они так больше не будут!...
He has a work bench, with a vice ,my god !!!!
Como apresentação foi muito bem feito, mas na realidade eu duvido que aguente o tranco.
The leaf springs have almost flattened hence load on axle. Given the situation they have done a good job. But in my opinion leaf springs should go under hydraulic press for bending and a new axle will be cheaper in the long run. But as they say maybe due to financial constraints the owner is forced to make do with repairs.
All the best guys
theres a saying in my language, it's basically "the cheap stuff is the most expensive" meaning, if you put cheap parts, they will fail or not work properly and you'll have to pay the cost of fixing plus getting another part, sometimes thats the only thing you can do
That's forged and it broke, the weld is much weaker so good luck with that lasting.
not the first time this broke . I see a prior weld .
@@dusterowner9978 I am with you on this one it will for sure break again mostly because all vehicle are overloaded all the time in india .
You obviously have no clue what the hell you're talking about!
Why do these guys all sound like Alvin and The Chipmunks?😊
@@JalopyTechnology Because every one of these videos is sped up 2x to fool all the morons who think it's "AMAZING".
hard working men doing a good job... very good
Not like the comment above 👆🏻
Step 1. Overload truck
Step 2. Fix whatever broke from being overloaded.
Step 3. Repeat step 1.
Very nice work guys. Great fix
Great job 👍
For more certainty, glue can be used.
Omar from kenya very good and less expensive than here.
That truck origionally had 6 leaves in the axle spring assembly. They just keep adding springs and overloading everything they have. That spring pack was 3 feet thick
И что характерно, вал балансира уже сваривался и сварка свежая. Не угомонятся. А замер линейкой на руках шедевр. Сантиметр плюс- минус, погрешность
Congratulation perfect work SALUTOS DE ALEMANIA
Türkiye'den Selamlar, Hayırlı işler diliyorum çok güzel başarılı çalışmalar.
Красавчики, разговору нет. Не плохо сделали. Не зря время потратил. Но, вот варить голыми руками 😂😂😂 это конечно заслуживает отдельного респекта. Отчаянные типы.
Цельный кованный кусок хорошей стали был, и сломался. Думаю такая залипуха на одну загрузку.
В маленьких городах в 90х после СССР так и работали, швелер или рельсу наварили, пластинок со шпал, у кого что было , отходило , сломалось и по новой.
Сломался потому, что в нём был заводскай брак, флокен или микротрещина которые послужили концентраторами напряжений.
@@kolshix во во в советское время ремонтировали все а сейчас давайте новую запчасть мы вам поменяем .
ранше в магазин пришёл притащил образец продавец штангельциркуль достал и начал подбирать что похоже . а сейчас вин код давай че ты мне суешь деталь , обленились матчасть не знают
@@Dpoba06Согласен Алексей поэтому надо возрождать иначе труба не выживем возвратимься в средневековье
@@КарабасБарабасов-и6з😂 этой трахоме лет 40 и вот заводской брак образовался, сам то веришь в это?
A great deal of work has been done
Boa tarde para todos!! Vocês são o máximo em mecânica! Parabéns! Deus convoscos sempre!! 👍 👍👏🏻👏🏻🙏🏻🙏🏻
I like most of there repais. But in the USA
You will loose everthing you own if something goes wrong.
Fantastico! Parabéns pelo ótimo serviço! Aqui do Brasil
You'll do some kick azz work 🎉
in the last seconds, you hit it with the hammer and broke the casing leaf spring tie down. don't think we didn't see it
El más lengua larga de UA-cam eres tu
They still got time to do another one before lunch.
Eine gute Arbeit von einem guten Team! 👍👍 Viele Grüße aus Deutschland.
Dunno about the long term, but gotta say that machinist did a pretty good job of it.
very poor job. they do alignment pin so big that they create 2 breaking points in the axel. pin is not to hold. weld holds. pin put parts in line
А что такое случилось? Нарядный станок, чистые работники, даже новый штангель вместо крон циркуля. Даже фломастер купили) )
Но токарю всё равно зачёт. Всё легко и по красоте сделал.
Зато сварщик порадовал стабильностью, самый толстый гнутый электрод - всё как мы любим.)
Love the lathe so well kept
Посмотрите другие видео, они и станки сами производят- возможно он новый.
Nice job, guys!
Really Nice Machine ,, Sir you are a Master of your Craft ,, 👍
I'd love to see a video of the cutting tools being refurbished.
Здорово! Для ремонта в их условиях, зделано всё, что возможно - Молодцы !!!
Very impressive
Congratulations
Meine höchste Bewunderung und Respekt vor der excellenten Arbeit, welche diese Mechaniker leisten!
Einen Punkt der Kritik muss ich vorbringen!
Beim Schweissen in der Drehbank ist das Massekabel (Ground) nicht direkt am Werkstück angeschlossen sondern irgendwo an der Drehbank!
Der Schweiß Strom fliesst durch die Maschine und alle Kugellager! 4 mm Rod und 140 Ampere !
In den Kugellagern gibt es elektrische Lichtbogen und diese werden dadurch zerstört!
Stimmt schon! Mich erstaunt immer wieder, welche Genauigkeit die Leute mit diesen ausgeleierten Maschinen erzielen. Ich meine, die schrecken auch nicht davor zurück auch die Lager nicht zu tauschen, sondern durch Ersetzen der Kugeln und Polieren der Laufflächen zu reparieren.
Impresionante !!!!👍🏻👍🏻👏👏👏👏
great work.....sir...❤❤
4:10の何気なく助けてくれる人素晴らしい。
正直中々いないのよね無意識で体が困ってる人のところに行ける人。
so much respect for you guys. absolute masters.
Orang Pakistan Luar biasa cerdas , Jepang kedua 👍👍👍
I like the way the trucks are decorated in rainbow colors and that the employees are allowed to wear dresses.
Just like in San Francisco
Just thinking about of all the metal splinters they take home in their hands. These guys get it done, and in sandals!
Great skills .
А что помешало выточить новый кусок оси и сделать стык внутри бугеля?
Так оно бы хоть сколько то поработало.
А то что сделано- может и дня не поездит.
11:19 lol, that tool is not even thightened correctly we can see the last stud is turning with the effort. They are really good at rushing a sh*tty job here. On the end result, the surface finish is so smooth, and its turning so round. Of course throwing and draging the part in the dirt is always a nice end touch.
a really challenge ! that God help you ;
but in this way the axis cannot have the same loading power
!
Wen you repair the same shaft six times a month, eventually you get really fast at it.
I'm always surprised by the fine craftsmanship of these men working with ancient, nearly worn out tools under conditions that would cause most westerners to quit their jobs.
is that welding grounding through tne lathe head stock ?
❤Respekt Meister Bravo ❤💪💪
You put the repair at the highest-stress point of the part. If you made a new stub end for the axle and placed the welded area a couple of cm outboard from the inner side of the cylindrical section of the axle, you'd be in a lower-stress area of the axle and the repair would have a better chance of holding up. Also, by drilling and threading a rod in the middle, you created a stress riser that will make another break in the same area more likely. You're better off in this situation to bevel the ends of the shaft that you plan to weld, then fixture it to maintain concentricity and weld the entire cross section with no rod or pin in the middle. Not only would this be stronger, but it's faster than machining threads to hold the parts together. Finally, when you cut threads, you should consider setting your compound to 60 degrees rather than oriented parallel to the lathe bed, which lets you cut with only one flank of the tool, allowing the chips to flow out of the cut much better and giving you a good finish on your threads. When you set it up this way, you know when you're done when you've moved the compound in (or out, in the case of internal threads) by a distance equal to your thread pitch - if you're cutting 1.5mm threads, you move the compound 1.5mm and you're at depth. Make a couple of spring passes (passes where the tool is put at the final depth, which removes any leftover material that didn't get cut due to tool or workpiece deflection) and you're done, and your threads should be as close to in-spec as you can get them without measuring them over wires.
no need to waste your time with advise for these guys, they just have third world mentality and technics, its not going to change, evenif they had the proper tool and setup, it would end up bare feet or in sandal, with the balll bearings on the dirt and sand.
It snapped because the metal that it was made from is not strong enough , ...repairing it is on par with polishing turds
It was strong enough for the loading specifications, which they obviously don't take the slightest notice of!
Better than factory...
Одно починили, другое отвалилось, молодцы :)
When the truck parked I thought they were going to fix the big dent on the rim xD
So it’s broken before, been welded up, then now broken again, so we just do the same failed thing on the even more messed up fragments? What thought process is this?
Excellent Job 👍 ❤ Do Hard And You Will win the World ❤️
Unbelievable to weld over the machine's guides and kinematics !
You are doing some good work, but I don't think you should be using hollow inserts to join the pieces together as the repair is prone to failure. Next time please use a solid piece of steel, thanks
She’ll be good for another 20 tons over weight! 😮
Я всегда смотрю такие видео , и восхищаюсь ихним трудолюбием . Хотя , вроде бы и сам не ленивый .
Esse cara é ótimo.
Mashallah very nice work dekh kar dil khush ho gaya pakistan zandabad
BackBreaking Work :: RESPECT
🙏🙏🙏
What would we do without dykem blue?
О! Очередная серия сериала "Цыганский автопром". А увеличенная скорость, как показатель мастерства, вона как мы умеем.
OSHA approved safety sandals
OSHA is for Americans who forgot how to make things and pander to the requirements of insurance companies, who in turn pander to their shareholders.
It’s a body that doesn’t give two f*cks about worker safety, only not paying out money in calima and maximising profits.
Wake up you dullards!
OSHA thing has spoiled westerners
Wait... Did this part was fixed second time? There is badly grinded weld visible just after extraction...
They are grinding or removing material how do they measure? I do not see a monitor showing input to or from a computer guiding the machinery.
The part had already been repaired by welding previously, broke and will break again soon.
You can fix a broken axel but you cannot fix stupid.
The screw-in type of repair has definitely taken hold with these men and is probably the best way to make this type of correction. But if it happens twice, time for a new axel. 😊
No they fix it again!
The best part of this is their steel-toed work shoes. What's an OSHA?
Oh change the record pleeeeease!
In case you hadn’t noticed this is third world so you’re first world comments and opinions are worthless.
WHAT IMPRESSED ME, IS AS A MECHANIC AND WELDER. I HAVE SHIT LOADS OF TOOLS, SOMETIMES FEEL LIKE I DON'T HAVE ENOUGH. YET THESE HOME BOYZ HAVE LIKE FOUR TOTAL TOOLS , AND CAN COMPLETELY TEAR DOWN A TRUCK, AND PUT IT BACK TOGETHER. WITH THAT SMALL AMOUNT OF TOOLS. SORRY SNAP ON. YOU'RE OUT OF BUSINESS 😂😂😂. GREAT JOB BROTHERS
Yes, but their main tool is the hammer. You probably have e a lot more finesse than that.
here in the U.S.we'd be waiting for a new part for weeks.
It makes a person wonder where they got all of the old machines from. Any tooling I would have used would have been broken by now.
السلام عليكم ورحمة الله وبركاته. كامل
I’m impressed.
Don't be. It lasts a couple weeks then breaks again
They sure do a lot with very little.. fantastic . adaptation and inguity.. ..it would look much better not to throw completed machined parts on the ground.
Чинят второй раз. Предыдущая сварка видна. И оторвало рядом со сваркой)
The best.
They do absolutely amazing work
These people would be Rocket Scientists in the US.
Gays americanos
У него есть съёмник для этих задач. Он точно делает такой ремонт не первый и не десятый раз.
Парни в сланцах починят все, изготовят все , только вот вопрос как это служить будет.
Если ободрать все эти украшения насколько легче станет грузовик?
How much is labor worth over there? How much can you buy that beam for??? Doesn’t make much sense !