this actualy happened for me in real life, only it was at my dad's job, and i was freakin scared, and the security actualy came, i couldnt wait for like half an hour to write in the code, XD
Anyone know how to shut up the Accenta alarm key panel from making all the bleeping/pinging noises when setting it? Its too f*&king loud at night before I go to bed, so I wake the kids setting it, FFS! Thank you.
To do this you'll have to access the main control panel itself - usually located in the under the stairs cupboard or in an upstairs cupboard. You'll have to unscrew the panel cover to access the circuit board. A Philips screwdriver should do this. Unscrew and open the panel cover. Warning: Doing this causes the alarm to go into tamper mode and staring sounding, You'll then need to go back to the keypad and enter in your code to silence the alarm. Back at the main control panel, towards the middle of the circuit board you should see a dial, marked VOLUME, (see picture: securitytradesupplies.com/wp-content/uploads/2017/07/ADEACCENTA8CTRLBOARD.jpg *on this particular model it is black and is below the power light*). In the centre of the dial is a screwdriver hole, this can be toggled with a Philips screwdriver to adjust the volume of the system's setting and unsetting tones. Turning it clockwise decreases the volume. After this, refit the cover of the panel, securing with the screw. Go back to the keypad and press the RESET button (or the X button on some keypads), to reset the alarm and take it out of tamper mode. Try setting and unsetting the system again to check that the volume level has changed, if the volume is still too loud or too quiet you can repeat this process until you are happy with the volume level. Hope this helps :).
So it will be nice to leave a code to what you can easily come up(but not anything like these---1234,1111,2684.2580,1379)such as the first 4 digits or last 4 digits of your phone number or license plate number in case you need to silence the system in a hurry.Or programming a key fob's button(or RFID card) as "disarm" in the system
ADE Accenta burglar alarms from the 90s can't be beat lol
***** xD Scannys are good too
***** Your opinion
haha ive had that moment when i forgot the code to my alarm at my house...it was a defo Oh Sh*t moment lol
love your alarm
It was obviously fireworks by katy perry, sounds exactly like her XD
Love these.
Absolute class!
Fantastic! :D
so funny. great video lads
Nothing beats accenta 🥵
Fireworks by Katy Perry
Long time no see, Welcome back into the game!
These guys really know how to make a funny video, Make more!
he was actually listening to katey perry firework but in a disturbing singing voice.
Aah the acenta 8
HAHAHAH Great job lads.
I've never seen a bell box like that 🤔. The cover is an Odyssey 1 but the internals are strange
It’s just an edit. The box didn’t really activate.
What about the comfort leds?
@@1mikogabbyIt was all an edit, the comfort LEDs are not the actual ones
And that is why you should pick a card which you will always remember
Chiffy Tho a code
1234?
7807 Remember hahahahah 😂
this actualy happened for me in real life, only it was at my dad's job, and i was freakin scared, and the security actualy came, i couldnt wait for like half an hour to write in the code, XD
remeber, its 7807!
ICELAND PIZZA!!!!!!!!!!!!!!!!!
Alarm
I don't know the code to my alarm either
Well there are 10,000 possibilitys to guess it
Anyone know how to shut up the Accenta alarm key panel from making all the bleeping/pinging noises when setting it? Its too f*&king loud at night before I go to bed, so I wake the kids setting it, FFS! Thank you.
To do this you'll have to access the main control panel itself - usually located in the under the stairs cupboard or in an upstairs cupboard.
You'll have to unscrew the panel cover to access the circuit board. A Philips screwdriver should do this. Unscrew and open the panel cover. Warning: Doing this causes the alarm to go into tamper mode and staring sounding, You'll then need to go back to the keypad and enter in your code to silence the alarm.
Back at the main control panel, towards the middle of the circuit board you should see a dial, marked VOLUME, (see picture: securitytradesupplies.com/wp-content/uploads/2017/07/ADEACCENTA8CTRLBOARD.jpg *on this particular model it is black and is below the power light*). In the centre of the dial is a screwdriver hole, this can be toggled with a Philips screwdriver to adjust the volume of the system's setting and unsetting tones. Turning it clockwise decreases the volume.
After this, refit the cover of the panel, securing with the screw.
Go back to the keypad and press the RESET button (or the X button on some keypads), to reset the alarm and take it out of tamper mode.
Try setting and unsetting the system again to check that the volume level has changed, if the volume is still too loud or too quiet you can repeat this process until you are happy with the volume level.
Hope this helps :).
Very funny!!
Shouldn’t the police come after sooooo many tames
he is listening to dubstup. duh.
humm that is made up because the alarm is in day mode! and the strobe is not flashing and not timelapse comfort lights!
Jake Bailey of course it is otherwise if the alarm kept blaring it would annoy the neighbors and possibly get the police
So it will be nice to leave a code to what you can easily come up(but not anything like these---1234,1111,2684.2580,1379)such as the first 4 digits or last 4 digits of your phone number or license plate number in case you need to silence the system in a hurry.Or programming a key fob's button(or RFID card) as "disarm" in the system
portal reffrence? :P
It was already in DAY mode and wasn’t set, FAIL
LOL you aint last
That’s happened to me and I have 3 bell box and 4 indoor alarm
Remember 7807
Hes listening to firework by katey perry xD
No shit Sherlock
why don't you have more veiws?
wtf are u listening to lol
LAST Hopefully
second
A rober easily get in your home so get a new panel