Yeah. Of the 5 i have, 4 are buggies. All brushless swapped. The speed runner is basically all aluminum and carbon upgraded, which definitely helps keeping it planted on the ground, and as well as modified shocks with shorter springs that have higher rebound rate, keeps the chassis and all 4 control arms level and low to the ground. So controlling it not difficult. Also extended axles on all 4 or just the rear (i have them both ways) eliminates the tumbles at high speed, by adding a solid 2 inches on width
Great WLTOYS Truck looks mean STANDING still. Now Sir can you please provide a Video of both Front & Rear Diff's as the sit in the housings , so it moves Forward. Thank you for your help.
Can you let me know if the throttle trim on your remote has any affect on the tuning of the speed control. I swear I've maxed it out in either direction and I can not tell the difference. Perhaps mine is faulty but pressing the buttons doesn't make the car start to go or backing it off doesn't create more braking. It does nothing.
Okay adjusting the throttle trim will not give it any more top speed or braking force than it already has at either full throttle or full brake when applied. The trim is just the neutral point adjustment between the reverse/brake and forward. Or rather how close the engagement point is for either forward or reverse when pulling on the trigger. U can set it to either engage at a hair sensitive when pulling the trigger or give yourself more dead spot or play room on the trigger to not be as sensitive, and allow u to pull the trigger maybe around 2 or 3mm down before engages the function. Now whichever direction the trim is towards, that direction will get more sensitive to response and opposite for the other direction. Have to upgrade all the electronics If your wanting the ability to set start and end points of the the throttle and reverse throw. Or exponentials, ABS braking pulses, steering exponentials and rates with limits,.. you need to upgrade to an better feature rich transmitter and receiver set, as well as the esc and servo, as the wltoys one is a combo esc and receiver in one, while hobby grade are seperate components, RX, Esc, Servo, All seperate. These factory combo units they come with 5 wire servos, and hobby grade servos are all 3 wire servos. . My suggestion for a budget friendly but quality and feature rich transmitter /rx kit, would be either a FlySky FS-GT3B or GT3C, whichever is in ur budget, both are great, one is slightly newer with a slim rechargeable battery pack and other takes 8 AA's. But requires a quick part mod to make the batteries last for months!! A simple mosfet desolder and resolder. Plenty of tutorial videos exist. And the also has a firmware flash mod to unlock and gain tons of new features along with a 80 car model memory. Retains every setting per vehicle u setup. Out of all my transmitters, my GT3B has been my goto. If you dont want to deal with modding and what not, the FS-GT3C is the one to go for.
I made the mistake in assuming the shocks where friction type shocks as well at first, as it was sooooo bouncy. And then as i removes one to toss on some oil filled ones, i noticed the cap was loose, and i unscrewed it, and they are actually oil filled shocks, just no oil in them. Ive bought 5 or 6 of these now, and they all come like that. Either they dont put oil in them, due to international transport of the products and either regulations or to avoid leakage from sitting in shipping containers and storage for indefinite time. Ive only noticed this with the plastic bodied shocks that come with the 959-A/B/979-A/B buggy and trucks, the other WLtoys have full metal bodied shocks, all arrive with oil in them. And surprising these shocks perform pretty well. But definitely anyone that gets one, pull the shocks off, and fill them up with 70wt or 80wt shock oil. Do compete bleed cycles by filling about 3/4ths up, and then actuate the shocks up and down handfuls, and then let them sit upright for some time to get all the bubbles out. Then fill up rest and cap them off. Alternate method, i tend to do many times, before filling oil into main shock body, flip bottom side up (if shock has removable bottom cap, and push rod quarter of the way, and fill some oil in, cap it and then proceed filling it up the norm way. Just saves the time needed to bleed by prefilling and pushing out air. same time a chance to apply some shock rod washer grease.
@@NordicRC Noice!!, Yeah i was blown away at the fact of how many people have just replaced the shocks without investigating a little more. Some they just leave the shocks on there and never realize it needs oil, and they run them, and all result in 10 to 20 rollovers after doing speed runs, cuzz dampening doesnt exist as they go sideways when coming to a sudden stop. Lol.
Got a complete series comparing the A959 and the A959-B. Check it out in my channel. But simply put: different motor and gear ratio in the B-version (crazy speed).
Looks like a tough little truck - and it needs to be with that much power on-tap! I gotta say I like this one, looks like a lot of fun and pretty well made - I think I would keep to the grass and dirt to protect it a little on the tumbles though :-)
Amazingly it is doing very well, and itøs even taken a bit more tumbles off camera. Quite durable. I think I prefer the buggy version though. Just as quick but a bit more manageble with small wheels/tires and lower center of gravity. Thansk for watching, Mark. Hope I have time to watch your new Rising Fighter video before bed time :-)
Replace the shocks, or replace the shock oil (or rather fill the shocks with shock oil after u get it, those tumbles dont occur except for the extreme angle of attack situations)
@@NordicRC its 7.4 lipo obviously the battery is longer ive had a problem with mine I've uploaded a video i have a feeling I've burnt the engine out that is only after a few runs very disappointed only had just under a week i do have the 14401 which is brilliant but I've snapped the front hub carrier just waiting on the part but thinking of upgrading to metal also would i benefit getting a heat sink for both cars especially when I've fixed the A979-B, thanks. Jamie
I've always wanted to race my modified dromida dt4.18 truck with one of those. Want to race? Lol great video my friend looking forward to your next video.👍
Hi Nick. Yeah, all the A9*9 models use the same chassis, suspension, drive line etc. It’s something that has been done ever since the 1980s by a lot of other brands like Tamiya and Kyosho. Traxxas, Arrma etc. does it too.
I'm pretty sure it's friction shocks. They just got a shock body filled with grease I think, for what I've seen. But I know, I've seen some folks that clean the grease out and fills it with oil. Maybe it works. Hope it doesn't leak.
Yeah, i've seen some videos with people opening them up. Maybe it could be fun to try it out myself :-) I just meant if they where going to leak in the long run. They are certainly sold as friction shocks. I've not seen any unboxings where the shocks work as oil filled shocks. In the videos I've seen with people opening up the shocks, I'm pretty sure it's grease (and not old oil as people claim it to be) they are filled with. I've had 30 year old shocks opened for the first time with better oil and more oil in them than these :-) I'm pretty sure WLtoys or the dealers has not had them on the shelf for a very long time.
I'm telling you because i've owned a few of these and the shocks come oil filled with seals and o-rings..but the caps are not tight from factory so most if not all the oil is gone..it takes a few seconds to open the top cap and fill it up.
I think it would need some a-arm extension too, to keep it from flipping and running it's own way when reaching 50 kmph or something. Crazy little thing :-)
No, I don't understand Danish, I'm from Switzerland. You have good English subtitles and I think you should just try to talk a couple of words in English. I also do it with my Swiss accent and the viewers like it.
Yeah, I was just kiddin’ :-) I do have some plans for it, so maybe I will try it out in a couple of videos later this year. But reading and writing is very different than speaking. I never speak English. But as soon as I feel good about the challenge I will do it from time to time and see if I like it :-)
Fairly controllable until half throttle and then you need to be in a straight line pretty much lol. Since I have done the all metal driveline and big brushless it's probably a little worse than at stock. I do plan on upgrading the tires to something better and that should help.
Just had a spin with my A959-B. It certainly is more controllable than the A979-B. I remember your upgrade. Pretty cool looking. Hope you'll have better grip with the new tires.
This is one of his best vids
It is? 🙂
I have an a979b coming in May, and this was an excellent review for me!
Hi Sylvia! I am pleased to hear that! The A979-B is great fun. Uncontrollable and too fast for it's own good, but great fun nontheless :-)
Did u have to wait more than a month
The start was brilliant!
Thanks, my friend!
Round leather? Hahaha ! Great bashing! This little thing is a BEAST! Nice video Mikael 👍
He he, those translations are funny some times :-) Yeah, too fast for it’s own good but still fun :-) Thanks, Charlie.
Those translations are super awesome. I remember that the chinese said rudder machine to a servo :)
lol, always great with some cool translations :-)
They Hell Far!! That’s thing is fast man. That surprised me. Should have put the one part as a 1..2…3 and 5:38 in.
Yeah, fast little one this one :-)
Very nice video, as usual! Awaiting Speed Test!
Thanks, my friend. Coming up soon :-)
Dang brotha at those speeds that lil guys probably to keep under control! Awesome though looks like good fun brotha!👍👍👊👊📹📹
Thanks, Steve. Yeah, I had a hard time keeping it on it's wheels. Quite uncontrollable and fun :-)
Yeah. Of the 5 i have, 4 are buggies. All brushless swapped. The speed runner is basically all aluminum and carbon upgraded, which definitely helps keeping it planted on the ground, and as well as modified shocks with shorter springs that have higher rebound rate, keeps the chassis and all 4 control arms level and low to the ground. So controlling it not difficult. Also extended axles on all 4 or just the rear (i have them both ways) eliminates the tumbles at high speed, by adding a solid 2 inches on width
How long does is run time
Great WLTOYS Truck looks mean STANDING still. Now Sir can you please provide a Video of both Front & Rear Diff's as the sit in the housings , so it moves Forward.
Thank you for your help.
Can you let me know if the throttle trim on your remote has any affect on the tuning of the speed control. I swear I've maxed it out in either direction and I can not tell the difference. Perhaps mine is faulty but pressing the buttons doesn't make the car start to go or backing it off doesn't create more braking. It does nothing.
Mine does the same.. heard this alot ...it just beeps ..either way, no speed difference
Okay adjusting the throttle trim will not give it any more top speed or braking force than it already has at either full throttle or full brake when applied. The trim is just the neutral point adjustment between the reverse/brake and forward. Or rather how close the engagement point is for either forward or reverse when pulling on the trigger. U can set it to either engage at a hair sensitive when pulling the trigger or give yourself more dead spot or play room on the trigger to not be as sensitive, and allow u to pull the trigger maybe around 2 or 3mm down before engages the function. Now whichever direction the trim is towards, that direction will get more sensitive to response and opposite for the other direction.
Have to upgrade all the electronics If your wanting the ability to set start and end points of the the throttle and reverse throw. Or exponentials, ABS braking pulses, steering exponentials and rates with limits,.. you need to upgrade to an better feature rich transmitter and receiver set, as well as the esc and servo, as the wltoys one is a combo esc and receiver in one, while hobby grade are seperate components, RX, Esc, Servo, All seperate. These factory combo units they come with 5 wire servos, and hobby grade servos are all 3 wire servos. .
My suggestion for a budget friendly but quality and feature rich transmitter /rx kit, would be either a FlySky FS-GT3B or GT3C, whichever is in ur budget, both are great, one is slightly newer with a slim rechargeable battery pack and other takes 8 AA's. But requires a quick part mod to make the batteries last for months!! A simple mosfet desolder and resolder. Plenty of tutorial videos exist. And the also has a firmware flash mod to unlock and gain tons of new features along with a 80 car model memory. Retains every setting per vehicle u setup. Out of all my transmitters, my GT3B has been my goto. If you dont want to deal with modding and what not, the FS-GT3C is the one to go for.
Wow so small be yet strong and fast little one 2 👍 keep up the good work mate
Yeah, small and fast and affordable is great fun sometimes :-) Thanks a lot, RC Misfits, my friend.
Nordic RC Visions your more then welcome mate 👍
Du bist Gei
@@NordicRC du bist Cool
I made the mistake in assuming the shocks where friction type shocks as well at first, as it was sooooo bouncy. And then as i removes one to toss on some oil filled ones, i noticed the cap was loose, and i unscrewed it, and they are actually oil filled shocks, just no oil in them. Ive bought 5 or 6 of these now, and they all come like that. Either they dont put oil in them, due to international transport of the products and either regulations or to avoid leakage from sitting in shipping containers and storage for indefinite time. Ive only noticed this with the plastic bodied shocks that come with the 959-A/B/979-A/B buggy and trucks, the other WLtoys have full metal bodied shocks, all arrive with oil in them. And surprising these shocks perform pretty well.
But definitely anyone that gets one, pull the shocks off, and fill them up with 70wt or 80wt shock oil. Do compete bleed cycles by filling about 3/4ths up, and then actuate the shocks up and down handfuls, and then let them sit upright for some time to get all the bubbles out. Then fill up rest and cap them off. Alternate method, i tend to do many times, before filling oil into main shock body, flip bottom side up (if shock has removable bottom cap, and push rod quarter of the way, and fill some oil in, cap it and then proceed filling it up the norm way. Just saves the time needed to bleed by prefilling and pushing out air. same time a chance to apply some shock rod washer grease.
Yeah. Good tips for all of us. I actually also got an old video where I put oil in one of mine.
@@NordicRC Noice!!, Yeah i was blown away at the fact of how many people have just replaced the shocks without investigating a little more. Some they just leave the shocks on there and never realize it needs oil, and they run them, and all result in 10 to 20 rollovers after doing speed runs, cuzz dampening doesnt exist as they go sideways when coming to a sudden stop. Lol.
What is price
There should be a link in the description box
Whats up with the “-B” series and the differences between the one without “-B”
Got a complete series comparing the A959 and the A959-B. Check it out in my channel. But simply put: different motor and gear ratio in the B-version (crazy speed).
@@NordicRC the -b version is faster
Is it worth it or better to buy another one?
Nowadays I would go for a 144001.
Looks like a tough little truck - and it needs to be with that much power on-tap! I gotta say I like this one, looks like a lot of fun and pretty well made - I think I would keep to the grass and dirt to protect it a little on the tumbles though :-)
Amazingly it is doing very well, and itøs even taken a bit more tumbles off camera. Quite durable. I think I prefer the buggy version though. Just as quick but a bit more manageble with small wheels/tires and lower center of gravity. Thansk for watching, Mark. Hope I have time to watch your new Rising Fighter video before bed time :-)
Replace the shocks, or replace the shock oil (or rather fill the shocks with shock oil after u get it, those tumbles dont occur except for the extreme angle of attack situations)
I like the Video, and I Like the Instrumental of the video... I’m Subscribing. Good Taste of Music...
Thank you very much, Antonio!
Your welcome. I’m getting into the Rc World a little bit now went brought a 4s Arrma Kraton that’s How I came across this video and I’m glad I did.
Wow! That’s a cool truck! Enjoying my Arrma Typhon as well.
Does A979-B Got Proptional Control Please Reply I'm Thinking To Buy A979B
Yes it does 🙂
Does the 7.4 2200mah fit
Which specific 2200 mah?
But no, I doubt you can make any 2200 mah fit without any modifications
@@NordicRC its 7.4 lipo obviously the battery is longer ive had a problem with mine I've uploaded a video i have a feeling I've burnt the engine out that is only after a few runs very disappointed only had just under a week i do have the 14401 which is brilliant but I've snapped the front hub carrier just waiting on the part but thinking of upgrading to metal also would i benefit getting a heat sink for both cars especially when I've fixed the A979-B, thanks. Jamie
😊👍those little suckers FLY! All motor!
Ha ha, all motor yeah. Like a small one.man-.plane with a large jet motor :-)
I've always wanted to race my modified dromida dt4.18 truck with one of those. Want to race? Lol great video my friend looking forward to your next video.👍
Would be a fun race :-) Went out for a GPS test today wth the A959-B and the Traxxas mini E-revo. Quite fun :-) Thanks, man
Waiting 7 hours for this
Breaking also flips it unless you pump them ...its a fun truck thou
Yeah, very fun little truck. Thanks a lot for watching!
I bought a 1/16 wheelie bar ...if i figuar out how to jerryrig it on ill let you know
Add skidplate will be fun they said
😊
WLtoys uses the same chassis for every single one of these cars they just modify it because it works.
Hi Nick. Yeah, all the A9*9 models use the same chassis, suspension, drive line etc. It’s something that has been done ever since the 1980s by a lot of other brands like Tamiya and Kyosho. Traxxas, Arrma etc. does it too.
BG music spoils the mood. Off road car on asphalt at high speed is bound to flip.
That thing is a little beast bro!! Hope your phone is ok man?
Both phone and A979-B are doing very well. Tough little fellows :-) My tripod has seen better days though. Too many hits by now :-)
oil filled shocks..just low on oil i'm sure
I'm pretty sure it's friction shocks. They just got a shock body filled with grease I think, for what I've seen. But I know, I've seen some folks that clean the grease out and fills it with oil. Maybe it works. Hope it doesn't leak.
No,they are oil filled with an o-ring and rubber cap seal..unless they stopped using oil recently?..open up the shock cap and look.
Yeah, i've seen some videos with people opening them up. Maybe it could be fun to try it out myself :-) I just meant if they where going to leak in the long run. They are certainly sold as friction shocks. I've not seen any unboxings where the shocks work as oil filled shocks. In the videos I've seen with people opening up the shocks, I'm pretty sure it's grease (and not old oil as people claim it to be) they are filled with. I've had 30 year old shocks opened for the first time with better oil and more oil in them than these :-) I'm pretty sure WLtoys or the dealers has not had them on the shelf for a very long time.
... ohh, but well, I'm just speculating. I've not opened them up myself, so maybe you're right :-)
I'm telling you because i've owned a few of these and the shocks come oil filled with seals and o-rings..but the caps are not tight from factory so most if not all the oil is gone..it takes a few seconds to open the top cap and fill it up.
How many hours is the charging time?
Usually around 2 hours I think, with the stock charger (which I never use).
@@NordicRC thank you🙂
Belllissssima car
Yeah, such a fun little ride 😀 Thanks for watching, enzo.
This thing forces you to learn throttle control
Definitely 😅
small but nice👌👌👌🚗🚗🚗
Yeah, I agree :-)
I love the back ground music it sounds like fart😂
That much power does make a little pointless. Any kid would get bored having go and get it all the time when it flips.
Maybe you're right. I did have quite some walks back and foorth this day :-) The A959-B Buggy version flips less often. Much more managable.
1/10 scale wheels and tires and proper oil weight in the shocks helps out a lot..I have a few videos of the A959-b on my channel..cheers
The real problem in this truck is the esc shut down... 😢
Yes maybe but not if its a pro kid?.. 😎
😂😂 That thing's just bonkers. They should sell that with a wheelie bar like the Cheetah.
I think it would need some a-arm extension too, to keep it from flipping and running it's own way when reaching 50 kmph or something. Crazy little thing :-)
ive got a a979b and im getting a cheetah 120 amp
I think it needs a brushless motor lol!
He he, I've actually seen some folks do it :-) But with the A959-B, the buggy version. A bit more managable with smaller wheels/tires.
Nice video, but some spoken words during the unboxing would be nice.
Not really my style, but yeah, I know, would be nice. But I don't think you would understand Danish/Scandinavian ;-)
No, I don't understand Danish, I'm from Switzerland. You have good English subtitles and I think you should just try to talk a couple of words in English. I also do it with my Swiss accent and the viewers like it.
Yeah, I was just kiddin’ :-) I do have some plans for it, so maybe I will try it out in a couple of videos later this year. But reading and writing is very different than speaking. I never speak English. But as soon as I feel good about the challenge I will do it from time to time and see if I like it :-)
goood..
Thanks! :-)
i.bought.a979b.
Nice! I've had a lot of fun with mine. Definitly a cool little RC!
That’s How it’s done folks! Get outside and run em👍
Good to see you here, Luke! And thanks! Yeah, keep 'em running :-)
만들기 WLTOYS a979 b 배터리😀😀👌👌👍👍 리포🙆♂️🙆♂️🙆♂️ 테이프붙여 ,인두기 않다 자르다 😠🙅♂️🙅♂️
que
Headphones? ..lol
Ha ha, yeah, it's so weird ... and funny. It's on the A959-B too. Maybe it's a cool word in Chineese :-)
Yea these little beasts don't handle well at higher speeds lol
Fun crazy cars still :-) I think the A959-B is more controllable, with the small wheels/tires and lower ground clearence. What is your experience?
Fairly controllable until half throttle and then you need to be in a straight line pretty much lol. Since I have done the all metal driveline and big brushless it's probably a little worse than at stock. I do plan on upgrading the tires to something better and that should help.
Just had a spin with my A959-B. It certainly is more controllable than the A979-B. I remember your upgrade. Pretty cool looking. Hope you'll have better grip with the new tires.
THIS IS A COMMENT
I see. So that is how a comment looks like :-)
Mein Sohn ist sehr begeistert von dem DingLong WL Toys A979-B - schneller RC Monstertruck amzn.to/2RQ9nmQ und für Rund 89 Euro ein echtes Schnäppchen.
you are polluting me.........