Но смысл был от точечной сварки, если автор в итоге перегорел акб при усадке бутылки... Термоусадочный рукав для того и используют, чтоб он быстро усадился и вы не успели нагреть акб.
Про 8 параллельных акб вообще молчу, такое допустимо только в дешёвых сборках. Если вам нужен акб на долгое и стабильное использование, параллельно ставьте минимум акб.
That's at least 200wh. Legally you can't have batteries totally over 100wh in total. In most cases the airport security will turn a blind eye even if you have a laptop/phone/powerbank/portable console that usually exceed that 100wh limit. But coming with such a large battery at the airport is basically acting like a 🤡 searching for attention.
@@user-wt5gl9dw6qон имеет ввиду накладок дополнительных теплоустойчевых они продаются и защитят когда тонкая изоляция банки протрётся отвибрации лопнет или проплавится. Всякое бывает.
@@najibkasim9102 Extra ring stil needed . Whole body of 18650 is pretty much negative contact, while overheating, mechanical damage etc etc red insolation of 18650 easily damaged, pretty much connecting negative and positive through nikel line
Реализация хорошая, а с точки зрения физики всё очень плохо. На сколько ампер рассчитана эта самая BMS плата? Как правило её рассчитывают на 40-60 а. То есть если на неё подадут максимальную нагрузку, то вот эти самые ленточки которые выдерживают 12 ампер просто нагреются очень сильно и расплавят изоляцию, что может привести к пожару. Надо делать несколько слоёв вот этой самой никелированные ленты.
Никелевые ленты есть сильно разной толщины. На камеру ты это не отличишь. Будем надеяться что автор пользовал толстые.( Хотя есть сомнения ибо вот тот мини сварочник вряд-ли потянет толстую варить)
I like the thriftyness but you should use insulation under the BMS when you fold the tabs it will rub on the side and short out that cell and cause problems.
Don’t bother. There pants don’t give you a good weld and he’s not going to be able to use that for much more then charging a phone that’s probably 0.05mm nickel at best guest anything that needs high draw current you want 0.2mm really I have 36kw spot welder and that will weld about 0.9-1mm of nickel on full power witch is mentle
Those look like plated strips. I hope you accounted for their Resistance and lack of current carrying power. As long as that pack doesn't need to pull more than 20 amps total you should be ok. If you used strips on each series maybe 30A on the series connections but you would need a copper wire for the "well" closest to the external positive and negatives. Or If you used pure nickel the whole way and connected each cell for the series connections youd still need like 3 layers of .15 at the well to pull anything close to what this probably needs. You may not melt down but you definitely are spending 25% of your capacity to heat generated. Best of luck brother. Pure nickel the way to go. But as far as workmanship A+ sir
Yea too bad this isnt legit. The one thing that gave it away? Well when using a bottle of that size and cutting it even when you shrunk it around the pack you would still see the parts where you cut. That being said its no wonder why your comments section is full of people who are smarter then you.
Green bottle se protect karne ka idea awesome tha👌👌👌👌👌😳
Но смысл был от точечной сварки, если автор в итоге перегорел акб при усадке бутылки...
Термоусадочный рукав для того и используют, чтоб он быстро усадился и вы не успели нагреть акб.
Про 8 параллельных акб вообще молчу, такое допустимо только в дешёвых сборках.
Если вам нужен акб на долгое и стабильное использование, параллельно ставьте минимум акб.
Hmare hyaaan to bat ka niche wala part bottle se cover Kiya jaata hai 😂🤫ye trika bhr ni jna chaihiye
overheating explode
Not good. Heating problem
Battery ❌ tnt ✅
i thought it was shotgun shells
Lol...😂😂😂
Why? Its a normal re-charger battery
@@Sora_Zawa same thing
he shouldn't put it in contact of any redstone singnal😅
Imagine trying to bring this through an airport LOL
😂
@@MohitGosavi-zs9gv
😂😂😂
🤔😂💣
They’ll see it as a 200WH hour battery
That's at least 200wh. Legally you can't have batteries totally over 100wh in total. In most cases the airport security will turn a blind eye even if you have a laptop/phone/powerbank/portable console that usually exceed that 100wh limit. But coming with such a large battery at the airport is basically acting like a 🤡 searching for attention.
no ring insulation on positive side of battery before spot weld
Она там есть
@@user-wt5gl9dw6qон имеет ввиду накладок дополнительных теплоустойчевых они продаются и защитят когда тонкая изоляция банки протрётся отвибрации лопнет или проплавится. Всякое бывает.
That's original 18650 battery that have hard plastic ring insulator inside of the top of the battery
@@najibkasim9102 Extra ring stil needed . Whole body of 18650 is pretty much negative contact, while overheating, mechanical damage etc etc red insolation of 18650 easily damaged, pretty much connecting negative and positive through nikel line
It won’t be a problem but it’s not a bad idea to cover it
99% of DIY stuff are just cheap and wrong, but the green bottle as heat shrink is genius.
My anxiety when he is using heatgun near 18605 clls 📈📈
@@user-pm4zj8qd9jI was literally about to say that lol. Especially because the plastic bottle takes so much more heat than regular heat shrink
Yeah genius, first he overheated the cells and then he is gonna use them without any heat dissipation 😂
@@stormfire451 Yeah also BMS generates lots of heat
@@user-pm4zj8qd9j Almost 18650 cal.
Brilliant idea, using plastic bottle as a heat shink insulation 🎉
бутылка содержит соединения хлора
Así se impide a cualquier corriente de aire refrescar las celdas y los semiconductores
overheating explode
@@user-wq6kn8hq7iWhy get hot?
@@user-wq6kn8hq7i negativity explode
Реализация хорошая, а с точки зрения физики всё очень плохо. На сколько ампер рассчитана эта самая BMS плата? Как правило её рассчитывают на 40-60 а. То есть если на неё подадут максимальную нагрузку, то вот эти самые ленточки которые выдерживают 12 ампер просто нагреются очень сильно и расплавят изоляцию, что может привести к пожару. Надо делать несколько слоёв вот этой самой никелированные ленты.
Никелевые ленты есть сильно разной толщины. На камеру ты это не отличишь. Будем надеяться что автор пользовал толстые.( Хотя есть сомнения ибо вот тот мини сварочник вряд-ли потянет толстую варить)
@@midasgames9331такая сварка толще 0.15 не варит и то с трудом, у меня есть такая, и то только никилированную ленту, про чистый никель можно забыть
Ладно, занудный русский электрик, на самом деле я из Индии и немного знаю русский язык.
@@kunarnav1985 я учитель физики. Я собрал 3 аккумулятора. Перед сборкой надо выполнить расчеты, желательно всегда надо брать запас по силе тока
Так мало этого, балансировку не подключил
*Bro's being Creative!*
*He turned on Creative Mode*
@@Hakutaralol
Just let him cook
Green is not a creative colour
@@GarfAVIwith those cells? And the zero heat dissipation? Yea, cooking is a real possibility
I like the thriftyness but you should use insulation under the BMS when you fold the tabs it will rub on the side and short out that cell and cause problems.
El truco de la botella me dejó impactado 😮👏🏾👏🏾👏🏾👏🏾
With that plastic bottle as a shrink wrap - that's a great idea
Test video please
why are you need the test? It is 98% factory parts. Don't you trust factory end?
Please give the link of that portable spot welder and multimeter
Search Man
1.MinderRC DH30 MAX
2.GVDA GD188 3 in 1 Digital Oscilloscope Multimeter
Find me that 3d printer with a silver shell and the 4 plastic spools on top and the screen@@aashishgupta1580
Don’t bother. There pants don’t give you a good weld and he’s not going to be able to use that for much more then charging a phone that’s probably 0.05mm nickel at best guest anything that needs high draw current you want 0.2mm really I have 36kw spot welder and that will weld about 0.9-1mm of nickel on full power witch is mentle
I googled it in 2sec the names on it. He’s not keeping secrets from you.
@@thelewisvrfamily2113not too much heat for the cells?
保護板的排插沒有插線啊
這樣怎麼均衡？
Seems nickel strips are used in this case
Wow... greath work
Battery pro really said “DIY” like everybody just has these things lying around the house
Thanks much for exhibiting the Soda Bottle heat treatment. That was fabulous. I will employ this technique.
Awesome, Thanks the Creation. ❤
Sir, where do you buy your 18650 batteries from? Because as far as i know they are either expensive or bad quality.
Abdul bhai ka maqsad pura.. 👍
Abdul ka maksad battery pack bana tha kiya 🤔
@@Rahukal-🍼piyo tum abhi
fir lynching karne kab ja rahe ho lol
@@rajkus108khao tum abhi 💩
کارش خیلی زیبا و حرفه ای بود.❤
Wow Superb 👌. Professional making 😮.
Спасибо. Знал же, и забыл. Больше не буду покупать дорогую термоусадочную трубку. 👍
Nice Nice ........ Thanks from the Infos 💪💪💪
Amazing ❤. Please describe material you use so we can understand more❤.
If youre talking about the electricity transfer, use anything conductive
1. Battery
2. Battery
3. Battery
4. Battery
5. Battery
6. Battery
7. Battery
8. Battery
9. Battery
10. Battery
...
24. Battery
25. Metal plate
26. Battery management system
27. Plastic bottle
28. Cable
@@haveaniceday3405If you don't know keep quiet.He also use heat resistant tapes.
Teleport this guys skills to america and fix so many broken scooter/ebike batteries and make more than enuf to justify the job
Those shoddy welds are why my Chinese scooter battery broke. Such an easy fix if it was safe
Put this in your pocket before going through TSA, they'll love it.
I watched this video 3 times in a row. So satisfying!
you need to be careful before flying on an airplane, they might think it's a bomb 😂
They know how li-on cells looks like. However, how it he done it, its a bomb. It can catch fire or explode or even both at the same time.
VERY impressive work, good job!
He maked real boom🥲 because when battery heated they chance of blast/burning. Too risky 😢
There should be air passage ,so that batteries are cooled
Hope it would not over heat??
That's why he use battery protection
@@mcreator7370
Where's the heat protection module?
It looked like a bunch of mini tnt packed together
That spot welder was gucci
Those look like plated strips. I hope you accounted for their Resistance and lack of current carrying power.
As long as that pack doesn't need to pull more than 20 amps total you should be ok. If you used strips on each series maybe 30A on the series connections but you would need a copper wire for the "well" closest to the external positive and negatives. Or If you used pure nickel the whole way and connected each cell for the series connections youd still need like 3 layers of .15 at the well to pull anything close to what this probably needs.
You may not melt down but you definitely are spending 25% of your capacity to heat generated.
Best of luck brother.
Pure nickel the way to go.
But as far as workmanship A+ sir
Bohot achi video hai bhai achi banaye video apne
NOOOO
LET THEM IN SERIES
Man that thing not gonna end well
Какая же отличная идея, нагревать литий-ионные батареи феном, усаживая пластик на них. А если серьезно, разве это не скажется на их работоспособности?
Одевая термоусадку, тоже ведь греть надо. А бутылка быстро садится, не успевают нагреть аккумулятор.
Seems like overheating might be a real problem with that insulation.
فكرة القنينة الخضراء فكرة رائعة
والسخونية
في حاجات يستحسن عدم الابداع فيها
i like ur welding machine please make a full vedio on this machine how we can weld andhow to purchage
Expensive if you're using quality batteries, but you would have a very capable battery.
That looks more like a TNT for me💀
Oooohhhh I like that trick with the green bottle!
TSA: “Sir, this is a makeshift bomb”
What is its name? How much does it cost? Please let me know.
Прям медитация, круто, спасибо
I did something like that once with six 3.7V lithium vape batteries and tried it on my old drill and it worked great😂
Для чего использовать эту батарею ? Напряжение при полном заряде будет около 18 вольт . Куда её применить ?
A friend requested and was going to DIY a car amp.
And the maximum voltage is 4 x 4.2V = 16.8V
I need to purchase the handspot like you using where did you purchase
Under my channel logo there is a link to a detailed video review of the spot welder, in its description you will find a order link🙂
There's a great ltt video of why this mostly isn't viable
Es más económico comprar un power bank que ese mamotreto jajaja
Я так и знал што пластиковые бутылки на штото ещё годны
What kind of welding machine do you use, tell me the name, thank you
How to get arrested at an airport 101
I wonder what you will do with this at the airport?
Why did you put sheets of material between each row of batteries
Battery ko heat krna safe hai ?
Sirf kuch seconds Tak hi karte hai
Что-бы песок амперы давал? Вот это дейсвительно чудеса. 😂😂😂
You are jeneous bro! 🫡
the bottle melting is so smart
من افضل وضع قطعة عازلة بين بطارية والكترون لكي لا يسبب شحن السريع اي حرارة مما يؤثرة في عملها
Esa madre se va a sobrecalentar, hasta posiblemente explote xd
Thats a cool ass multimeter
Battery combination ❌
Nuclear bomb making ✅
Yea too bad this isnt legit. The one thing that gave it away? Well when using a bottle of that size and cutting it even when you shrunk it around the pack you would still see the parts where you cut. That being said its no wonder why your comments section is full of people who are smarter then you.
PET case idea is great!~
Bro is going to maie a tesla battery 💀💀
Ye spot welding kaha se milega aur kitane ka mujhe bhi chahiye
Search in my Channel (10000mAh Portable Spot Welder) and all details is in description of the video.
Great. Having a heat gun right on batteries to hopefully not explode them
What’s the capacity of this battery and how much to build including tools
Pls tell me the welder!
It should have a proper aur cooling pr else it will buildup heat
No thermal censor to stop charging, if the temperature gets too high 😉
Nice, you have a power bank that turns into a bomb 🎉
how to charge ?
Yah machine Kaun Thi bhai jismein Apne Pati se tanka Lagaya mujhe bhi bataiye
Where is the Balancer for the single battery? Where is the temperature control?
"The mother of all little battery's Jack"
Remember: when one cell fails. The whole thing fails
Why were you using dried seaweed for part of the build?
What is the practical application for such device?
That Bottle is a good idea I didn't think about that
Add some capacitors and make an electro-shocker
Hola, con qué se hacen esas soldaduras de punto? 😮
Ah
Heat gun and lithium ion battery
The perfect combination
asmr at the end 🤌✨
हमारे गांव में चारपाई के पाए को फटने से रोकने में ऐसे बॉटल से लेमिनेशन किया जाता है।😂
Where can i buy spot welder like yours?
I thought they were shotgun shells at first 💀
ما هو اسمها؟ كم يكلف؟ أخبرونى من فضلكم.❤❤❤❤❤😢
So that wire can be used to charge it and use it as well?
Actually red is my favourite colour.
Bro's making a bomb 💀
How much would this cost on materials? Usd or cad and which supplier?
What is this machine to solder on batterys?
I must have one😅
What’s that soldering technique or whatever it is
Keep this in your bag when you are at the airport going through customs
Super. Comment trouver un fer à souder à point comme ça ?