Great video, helped me get my 76 1500 running! Now that she's running, Im having an issue where the engine won't idle down. Even after backing off the 5 deg adv screw. Wondering if you've ever run in to that problem? Thanks!
Where the best place for instal the fuel filter ? Outside de gas tank or before the fuel pump ? Can I install 2 fuel filters? one before the fuel pump and another at the outlet of the fuel tank
Greetings, good video, I have a Mercury Mariner Magnum 150 hp v6 2 stroke, it has compression in all cylinders from 135 to 140, I changed the gas line and the bulb, also the gasoline pump kit, I eliminated the oil injection, it's happening to me I start the engine using a new tank with the pre mix but when I pump the bulb the mix rises and the engine starts at the moment as if it does not get enough gasoline and it begins to fail quickly before it goes out I re-tighten the bulb and It starts to run strong again. It's as if the gasoline was going backwards. What could it be?
@@MerCSonL6 Greetings, I also rebuilt the gasoline pump, even so it does. My pump is a complete diaphragm on both sides. My engine is 88. Another kit comes with 2 holes in one of the diaphragms. Does that also work or what is the difference?
I'm working with a 1987 mariner 115 inline would like to know if there is a kit for all the moving throttle bushings? Also what kits do you install in the wmk-41 carbs are they available in a three piece kits ? Thank you in advance 😊
I"m sorry but I don"t understand How many turns of the carburettor screw should I give on my engine? 1.5 or 2.5? turns of the screw?thanks,sorry I use translator,I"m writing to you from italy🤗@@MerCSonL6
I thank you for your precious expert advice, I try to do as you say , but I have always found on several identical 6 line merc engines even 2.5 turns anticlokwise and not 1.5 and I don"t understand why so much I will try to listen to you with 1.5 thank you so much.😅@@MerCSonL6
Kenny said music to his ears !
Yes sir.
Sweet Eng
Had to watch this again that thing is kicking.
Great video, helped me get my 76 1500 running! Now that she's running, Im having an issue where the engine won't idle down. Even after backing off the 5 deg adv screw. Wondering if you've ever run in to that problem?
Thanks!
❤
Where the best place for instal the fuel filter ? Outside de gas tank or before the fuel pump ? Can I install 2 fuel filters? one before the fuel pump and another at the outlet of the fuel tank
Install an inline glass inline after the primer bulb. Son
@@MerCSonL6 thanks Son 👍🚤🫡🎣
Greetings, good video, I have a Mercury Mariner Magnum 150 hp v6 2 stroke, it has compression in all cylinders from 135 to 140, I changed the gas line and the bulb, also the gasoline pump kit, I eliminated the oil injection, it's happening to me I start the engine using a new tank with the pre mix but when I pump the bulb the mix rises and the engine starts at the moment as if it does not get enough gasoline and it begins to fail quickly before it goes out I re-tighten the bulb and It starts to run strong again. It's as if the gasoline was going backwards. What could it be?
rebuild the fuel pump. Son
@@MerCSonL6 Greetings, I also rebuilt the gasoline pump, even so it does. My pump is a complete diaphragm on both sides. My engine is 88. Another kit comes with 2 holes in one of the diaphragms. Does that also work or what is the difference?
@hooked_fish those pumps are a little confusing. The springs for the check valves. When I assemble them I really have to focus lol.
I'm working with a 1987 mariner 115 inline would like to know if there is a kit for all the moving throttle bushings? Also what kits do you install in the wmk-41 carbs are they available in a three piece kits ? Thank you in advance 😊
@@73larryj www.amazon.com/dp/B0BG54DQV7/ref=cm_sw_r_as_gl_apa_gl_i_VE07536MNHGN7ED1BGYN?linkCode=ml2&tag=mercsonl6-20
You'll need 3 of these.
I"m sorry I wanted to ask you if you know how many turns on the carburetor screw? Is 2 and a half turns fine?🤔
1.5 out from lightly seated on freshly rebuilt carbs. Son
I"m sorry but I don"t understand How many turns of the carburettor screw should I give on my engine? 1.5 or 2.5? turns of the screw?thanks,sorry I use translator,I"m writing to you from italy🤗@@MerCSonL6
@norwajjohnson8726 you want to screw in clockwise until lightly seat. Then unscrew 1.5 turns counter clockwise. Son
on all mercury 6 line or always found 2,5 turns on the 3 carburettor screws,not 1,5 turns and a half, how come? why?🙄🤔@@MerCSonL6
I thank you for your precious expert advice, I try to do as you say , but I have always found on several identical 6 line merc engines even 2.5 turns anticlokwise and not 1.5 and I don"t understand why so much I will try to listen to you with 1.5 thank you so much.😅@@MerCSonL6
What is the wot for a 87 115hp inline 6 and what speed can I expect on a1600lb 17ft center console proline
Wot = 5800 to be safe. Top speed depending on your prop is around 45mph. Son
@MerCSonL6 I have a 13 17p on engine and turning 4800 at about 32mph
@@MerCSonL6 what could be the prob
@jamesstepic871 switch to a 15 pitch aluminum and see where the rpms hit. The powerband hits around 5500.
@@MerCSonL6 15pitch what dia
Where are you located .I have a 60 hp 1984 merc I need worked on I want to hear it talk
25403
Where
Same here I have a 86 classic 50
@@johnfielhauer9888 Martinsburg wv eastern panhandle
Kenny said music to his ears !
music to mine as well!!!