How does this work with sigmastudio compatibility? Is there a sigmastudio file available? Or is it not possible to combine both the programs? Any documentation I could find somewhere about this setup?
Hello. Please note that PC UI control and SigmaStudio program are two different control methods. They work independently by different firmware and will not affect each other.
Hello, we have released a demo program of 4.2 system for JAB4 and 2x30W TAS5754. You can make modification based on this program for that of JAB5 and 2x30W. Here is the link for your reference. store.sure-electronics.com/images/documents/JAB4&TAS5754_4.2%20System_3way_DigitalCrossOver_2021.07.12.zip
I'm wondering about jab5 long time Allready but on the official site was no black Friday deals. 😞 I can mix 4ohm and 8ohm if gonna use two boards? Is it possible to set up mono speaker and send second side signal to another mono speaker I guess in this situation through the wire?
Hello. Our products don’t support TWS function for now. Products supporting TWS are under development and will be released soon. Please kindly stay tuned.
I try to build the same system; I experienced a sudden very loud harsh noise comming out of my tweeters (powered by TAS5756) when plugging my TAS5756 to JAB5 with I2S. There are no such problems on mids and bass, allocated to JAB5 Could you help me please ?
Hello, please kindly write this program into the DSP of JAB5 and try it again (files.sure-electronics.com/download/JAB5_TAS5754_DSP_DSPPROJ.zip). If there is still problem, could you please kindly send us some videos so that we can pinpoint the problem and solve it for you? You can contact us at store@sure-electronics.com. Wish this could help you. Have a fantastic day~
@@romainlouault4619 Hello, we have tried with the link and the file can be downloaded. Could you please try again to open it with the Chrome browser? Here is the link: files.sure-electronics.com/download/JAB5_TAS5754_DSP_DSPPROJ.zip
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
This is what im lookimg for , also avr reciever + nuendo or pro tools daw + izotope ozone 11 , can do this advancedly
Hello, between Miumax/PC UI and SigmaStudio there is a difference in final sound quality using same parameters?
Hello. Can the Bluetooth module be programmed with a csr spi programmer?
How does this work with sigmastudio compatibility?
Is there a sigmastudio file available?
Or is it not possible to combine both the programs?
Any documentation I could find somewhere about this setup?
Hello. Please note that PC UI control and SigmaStudio program are two different control methods. They work independently by different firmware and will not affect each other.
@WONDOM Audio okay thanks for the reply.
Can I learn somewhere how to program 4.2 three way design using the jab 5 + 2x30w in sigmastudio?
Hello, we have released a demo program of 4.2 system for JAB4 and 2x30W TAS5754. You can make modification based on this program for that of JAB5 and 2x30W. Here is the link for your reference.
store.sure-electronics.com/images/documents/JAB4&TAS5754_4.2%20System_3way_DigitalCrossOver_2021.07.12.zip
I'm wondering about jab5 long time Allready but on the official site was no black Friday deals. 😞 I can mix 4ohm and 8ohm if gonna use two boards? Is it possible to set up mono speaker and send second side signal to another mono speaker I guess in this situation through the wire?
How can I use sigmastudio?
Is there a sigmastudio file available for a 2.2 sytem?
Hello! One question about jab3+: How to turn off it without disconnect from battery (bcpb2 3s)? IS there a place to connect power button?
Hello. You can connect a control button between Pin "STBY" and Pin "GND" of J12 on JAB3+ for power control.
Is it possible to set the bluetooth module to tws mode? Please release the pinout of the btm
Hello. Our products don’t support TWS function for now. Products supporting TWS are under development and will be released soon. Please kindly stay tuned.
I try to build the same system;
I experienced a sudden very loud harsh noise comming out of my tweeters (powered by TAS5756) when plugging my TAS5756 to JAB5 with I2S.
There are no such problems on mids and bass, allocated to JAB5
Could you help me please ?
Hello, please kindly write this program into the DSP of JAB5 and try it again (files.sure-electronics.com/download/JAB5_TAS5754_DSP_DSPPROJ.zip). If there is still problem, could you please kindly send us some videos so that we can pinpoint the problem and solve it for you? You can contact us at store@sure-electronics.com. Wish this could help you. Have a fantastic day~
@@WONDOMAudio Hello could you please verify, your link seems to be dead
@@romainlouault4619 Hello, we have tried with the link and the file can be downloaded. Could you please try again to open it with the Chrome browser? Here is the link: files.sure-electronics.com/download/JAB5_TAS5754_DSP_DSPPROJ.zip
Thank you this working now ! I have to test this firmware now
Song name please
Hello! The song is 'Army' by Besomorph, Arcando, and Neoni. Enjoy your day!
There is a problem. Must be fanless