Just finished my install, following your vid. I made a couple of changes - I powered both black and red wires from the driver side (uk) sidelight so that I didn’t have the hassle of trying to access the other one. I also didn’t splice into the indicators, I simply took the bulbs out, trimmed and extra inch of exposed wire on the yellow wire, and put the wire into each side where the pins for the bulbs go, rather than splicing into the indicator wires. There was such limited access, I couldn’t really do it any other way. Thanks for the vid, my setup looks mint thanks to you guys. Cheers
I've just stumbled across this video a week after I installed some of these on my MK6, I extended the red wire and ran it through into the cabin where I spliced it into the foot well lights. That way, the white LED running lights come on when I unlock the car and stay on continuously with the ignition running. I found it easier to splice into the headlight wiring loom rather than connect to the wires inside the headlight itself. For anyone else reading, on your MK6, the black and green wire in the main headlight loom (Pin 9) is the live for the indicators.
Assalamu alaikum Bhai. Just wanted to thank you because watching this vid and a few others I managed to install it onto my first car. Ohto shundor lageh man. My car is a Corsa and I had to remove the bumper to get to the wires. You're a legend 👊
Assalamualaikum brother, what a great video. Were working on my vw polo, I just wondering where do you connected the signal wire from? Is it with the signal bulb? 6:11
So you connected the black and red wire to the park light and the yellow wire to the indicators? But what if you still want to use the stock indicator and drl indicator at the same time
Yes thats correct if you want to use the stock indicator drl at the same time you can slice the indicator wire together then they will both work at the same time.
Mine is golf mk6 too, I done it resolving to stay on when engine is on, the ice blue is ok, but the indicators doesn't work with engine on, only with engine off ?
What will happen if you take out the original indicator bulb? And also can you connect positive and negative wires somewhere else(not to parking light)? Thank you!
Hi yes you can take the indicator bulbs out but i left them on jus popped them out so i dont get any dash warnings and yes you can put it on any positive and negative terminals but i put it on the side lights so you can turn them off when you want
Hi red connects to the parking light positive and black connects to parking light negative and the yellow wire connects to one indicator wire the one that is the signal wire
Did you have to strip the wires back@all on the strips you got? Im going to attempt to install these myself from following your video, also can you provide anymore detail on the "splicing part" regarding connecting them to the existing wires on the lights etc? Thankyou!
@@bangladeshiscottishvlogs1064 mine dont have the switch thing attached like yours do, but i assume i wouldnt need it anyway? Also just wondered, i saw another video where a guy cut the sealed end bit off+just left the water proof sealent showing. Did you?
Hello, do you think this would be possible to place on the bottom side of my headlights? I like how it looks from the top but from the top I have "eyebrows" for bad look and I wanted to place them from the bottom but as you said it perfectly "I dont want them to be visible" or someount could just tape them off. Cool video and very informative!
Hi thanks for the comment yes it would be possible to fit them at the bottom but it will be a bit more difficult because access is tight but if you can take the whole headlight out that would make it much easier.
Firstly, thank you for the video , i have the same one it work when i turn on the key , but once i turn on the engine and move the car the DRL lights doesnt work anymore , if u can help i will really appreciate
Hi thanks for the video, I have connected mine to the VW Polo 2014 but the issue is when I run the Engine the DLR lights switches off, when the engine is not running they function well. what can be the cause? Thanks
@@bangladeshiscottishvlogs1064 I'm putting these in tail light should I try changing battery. Because I check voltage when on it shows 14something When engine off they work fine
Hello and thanks for making the video, I used it to install my lights but I have a problem. the indicators sweep perfectly with the ignition on but engine off, as soon as I start the car the indicators stop working. Did you have this at all, wondering if I need a pair of relays or something? Thanks
Hi your welcome yes i also had that problem when ignition on engine off it works perfectly but as soon as the engine is on it works intermittently i thought it was only my problem maybe my car but u have noticed if you turn the heaters on full it works because the voltage drops so im thinking when the engine turns on the voltage is too high so i guess it needs to be 12v to work correctly i hope you sort it out you might need a resistor
Thanks for quick reply, Ah I’m glad it’s not just me I thought I was missing something. I remember fitting reverse camera and when I connected it to reverse light it flashed on and off when engine was on, I resolved this by fitting a relay using aux power to supply the camera and the light supply to switch it. I am going to try this now and update if this works.
Hi again, fitted 4 pin relays so the indicator signal switched the relay to provide power from aux connection to the LED and it all works fine so there is a solution if anyone else suffers this
@@alanclarke888 hi this is my another account thanks for the update im glad there is a solution for the problem where did you get the relays from thanks.
@@bangladeshiscottishvlogs1064 so i installed them the same way as you and when turn signal turned they flicker at beggining every time, also i see that you unplugged parking lights and turn lights, but when i do that it reports a error, i can send you a video
@@elvisrahimic2274 hi the reason they flicker is because the parking light has to be on thata what gives it power and i left the turn signal bulb in so it doesn't show error but i just took it out and left it inside
In the indicator there are 2wires....the drl has a yellow wire where does this yellow go within indicator bcos there are 2? Also from drl theres red and black where do they go?
The red wire goes into the parking light positive and the black wire goes into any negative terminal even the parking light negative will do and the yellow wire goes into the indicator signal wire you have to test which of the 2 wires it is
@@bangladeshiscottishvlogs1064 how do you know which one is positive terminal for red wire and how do you test the positive terminal for the yellow wire
Just finished my install, following your vid.
I made a couple of changes - I powered both black and red wires from the driver side (uk) sidelight so that I didn’t have the hassle of trying to access the other one. I also didn’t splice into the indicators, I simply took the bulbs out, trimmed and extra inch of exposed wire on the yellow wire, and put the wire into each side where the pins for the bulbs go, rather than splicing into the indicator wires. There was such limited access, I couldn’t really do it any other way.
Thanks for the vid, my setup looks mint thanks to you guys. Cheers
No problem your welcome its good way you did it your right it looks mint
Hi. Any idea of where you got them, the link on here doesnt bring any up on ebay. I have a mk6 golf, cheers
I've just stumbled across this video a week after I installed some of these on my MK6, I extended the red wire and ran it through into the cabin where I spliced it into the foot well lights. That way, the white LED running lights come on when I unlock the car and stay on continuously with the ignition running.
I found it easier to splice into the headlight wiring loom rather than connect to the wires inside the headlight itself.
For anyone else reading, on your MK6, the black and green wire in the main headlight loom (Pin 9) is the live for the indicators.
ua-cam.com/users/shortsUyyUh3Sreek?feature=share
Here is a link to a short video
That looks really nice good job where did you get these led strips from
I connected my ones to the parking lights
@@bangladeshiscottishvlogs1064 they're from ebay
Ok thanks
Assalamu alaikum Bhai. Just wanted to thank you because watching this vid and a few others I managed to install it onto my first car. Ohto shundor lageh man. My car is a Corsa and I had to remove the bumper to get to the wires. You're a legend 👊
WALIKUM ASSALAM YOUR WELCOME.KUSHI OISI BHAI HUNYA
Nice ❤❤❤❤❤❤❤❤
Any idea on where i can get them mate? The link doesnt being anything up, cheers?
Did you end up removing the rubber caps@the end of the strips or leave them? I saw a video where someone removed them?
Assalamualaikum brother, what a great video. Were working on my vw polo, I just wondering where do you connected the signal wire from? Is it with the signal bulb? 6:11
Hi thanks the signal wire comes from the signal bulb and the positive and negative comes from the sidelight
Good information 👍 ❤️
Thank you
So you connected the black and red wire to the park light and the yellow wire to the indicators? But what if you still want to use the stock indicator and drl indicator at the same time
Yes thats correct if you want to use the stock indicator drl at the same time you can slice the indicator wire together then they will both work at the same time.
I tried , but in my case didn't work together
Mine is golf mk6 too, I done it resolving to stay on when engine is on, the ice blue is ok, but the indicators doesn't work with engine on, only with engine off ?
What will happen if you take out the original indicator bulb?
And also can you connect positive and negative wires somewhere else(not to parking light)?
Thank you!
Hi yes you can take the indicator bulbs out but i left them on jus popped them out so i dont get any dash warnings and yes you can put it on any positive and negative terminals but i put it on the side lights so you can turn them off when you want
Can you get these for the rear lights also?
LED light installing watch done also like done
Thank you apu
Very useful upload
Thank you miraj bhai
Amazing My dear friend
Very helpful and informative video. Thanks for sharing apu👍
Thank you apu
Nice upload 👍❤️ congratulations
Thank you sayma afa bala asoin ni
Black and yellow are turn signal and red is drl but they re two wires for the drl light which one do you connect the red to
Hi red connects to the parking light positive and black connects to parking light negative and the yellow wire connects to one indicator wire the one that is the signal wire
Which one is the signal wire (colour)
What's the parking light
The drl
Yellow wire black is negative and red is positive
@@bangladeshiscottishvlogs1064 can you send me a picture of what wires go where I really need the help
আসসালামু আলাইকুম আপু মাশাআল্লাহ অনেক সুন্দর হয়েছে
Thank you apu
Great sharing sis.and congratulations
Thank you apu
Such a helpful 👍🏼
Did you have to strip the wires back@all on the strips you got? Im going to attempt to install these myself from following your video, also can you provide anymore detail on the "splicing part" regarding connecting them to the existing wires on the lights etc? Thankyou!
Ok no i did not have to strip the wires i got these connectors that crimp on to the cars wires
@@bangladeshiscottishvlogs1064 ah ok. Well ive got some scotch locks, they are suitable aswell i believe? Hope mine turn out as good
Yes im sure they will
@@bangladeshiscottishvlogs1064 mine dont have the switch thing attached like yours do, but i assume i wouldnt need it anyway? Also just wondered, i saw another video where a guy cut the sealed end bit off+just left the water proof sealent showing. Did you?
No i didn't have to cut any sealant it was a very straightforward install connect to the parking lights so you can turn them on and off
Very nice
Thanks you for sharing
Thank you
দুলাভাইয়ের কাজ খুবই ভালো লাগলো
Thank you atik bhai
very informative and thank you so much for sharing dear
Thank you tania afa
Just saw ur video! amazing tutorial, just a question though, for the turn light signal wire (yellow one), did u connect it to the DRL also?
Hi thanks for your comment yes the yellow wire is connected to the cars indicator.
Hello, do you think this would be possible to place on the bottom side of my headlights? I like how it looks from the top but from the top I have "eyebrows" for bad look and I wanted to place them from the bottom but as you said it perfectly "I dont want them to be visible" or someount could just tape them off.
Cool video and very informative!
Hi thanks for the comment yes it would be possible to fit them at the bottom but it will be a bit more difficult because access is tight but if you can take the whole headlight out that would make it much easier.
ua-cam.com/users/shortsUyyUh3Sreek?feature=share
Check out this video the led is at the bottom
@@jaymiah9861 yes exactly what I want! Glad to see its possible. Ty
Your welcome
Do u cut the 3 drl wires to connect with the indicator
I mean cut wires to connect to each other if that makes sense
You connect the yellow wire to one of the indicator wires splice it on
Can you tell me exactly which wires connect to which wires
The side light did u put on 2connectors? 1 positive and 1negative both seperate?
Yes both separate
looks gorgeous :) are they canbus decoder strips?
HI THANKS YES THEY ARE CANBUS.
Nice information 👍
Thank you
Nice video 👍
Thank you
Hi what do you mean?
Beautiful thanks for sharing
Thank you 😊
Have a MK5 golf (2004) not a clue where the indicator wire is so i can connect them both. Someone help please!
Hu the indicator wire will be next to the indicator bulb
Very nice video
Thank you 😊
@@bangladeshiscottishvlogs1064 wlc
Firstly, thank you for the video , i have the same one it work when i turn on the key , but once i turn on the engine and move the car the DRL lights doesnt work anymore , if u can help i will really appreciate
Hi your welcome for the video i had the same problem but i put in a new battery and it fixed the problem i hope that helps.
@@bangladeshiscottishvlogs1064 thanks for the reply , i forget to tell you that i have a golf mk7 , im wondering how its gonna work whit it
Good information
Thank you
Wow it’s cool
Thank you
Hi thanks for the video, I have connected mine to the VW Polo 2014 but the issue is when I run the Engine the DLR lights switches off, when the engine is not running they function well. what can be the cause? Thanks
could be too much voltage going into the led
I have the same issue whit my golf mk7
Same problem.
Thank you for sharing
Thank you
I'm fitting rear drl led they work in sequence as they should when engine is off
If I turn engine on only half the lights come on
Hi my ones did that too but after i changed the cars battery it works perfectly now.
@@bangladeshiscottishvlogs1064 I'm putting these in tail light should I try changing battery.
Because I check voltage when on it shows 14something
When engine off they work fine
Yeah try changing the battery that worked for me
After ignition, on running engine, indicator fails... 🤔
What might be the problem?
I think your car battery is low
Hi my did do that at first but after i put a new battery in everything was working fine so it could be that.
How do you switch from DRL mode to indicator mode or is it automatic
Hi yes it switches automatically.
Hello and thanks for making the video, I used it to install my lights but I have a problem. the indicators sweep perfectly with the ignition on but engine off, as soon as I start the car the indicators stop working. Did you have this at all, wondering if I need a pair of relays or something?
Thanks
Hi your welcome yes i also had that problem when ignition on engine off it works perfectly but as soon as the engine is on it works intermittently i thought it was only my problem maybe my car but u have noticed if you turn the heaters on full it works because the voltage drops so im thinking when the engine turns on the voltage is too high so i guess it needs to be 12v to work correctly i hope you sort it out you might need a resistor
Thanks for quick reply, Ah I’m glad it’s not just me I thought I was missing something. I remember fitting reverse camera and when I connected it to reverse light it flashed on and off when engine was on, I resolved this by fitting a relay using aux power to supply the camera and the light supply to switch it. I am going to try this now and update if this works.
Hi again, fitted 4 pin relays so the indicator signal switched the relay to provide power from aux connection to the LED and it all works fine so there is a solution if anyone else suffers this
@@alanclarke888 hi this is my another account thanks for the update im glad there is a solution for the problem where did you get the relays from thanks.
Hello, ir os possible to put an image of the used relay thanks
I have one question if you can answer, also is golf mk6
Hi yeah sure its a golf mk6
@@bangladeshiscottishvlogs1064 so i installed them the same way as you and when turn signal turned they flicker at beggining every time, also i see that you unplugged parking lights and turn lights, but when i do that it reports a error, i can send you a video
@@elvisrahimic2274 hi the reason they flicker is because the parking light has to be on thata what gives it power and i left the turn signal bulb in so it doesn't show error but i just took it out and left it inside
Just leave the lights switch on auto
@@unknowng9099 did you do this also on Golf MK6?
Nice upload...Lk 32 dear
Thank you
Any error in the dashboard Sir?
Hi no errors
When i install it this way, when i turned on contact ... En they shut off
does it shows a canbus error?
No but sometimes it shows bulb out error
nice❤
Thank you
😍😍😍
Thank you
👍👍👍👍
Thank you
Need to do this on the smart car
Yeah you should it would look sik
I'm doing them now so a reply will be appreciated greatly
আসসালামুআলাইকুম আপু
কেমন আছেন
দারুণ একটি ব্লগ শেয়ার করার জন্য ধন্যবাদ।। খুব ভালো লাগলো
আমার বাসায় আসবেন দাওয়াত রইলো আপনার
Thank you
Very nice video old friend stay connected plz like 37
Thank you 😊
In the indicator there are 2wires....the drl has a yellow wire where does this yellow go within indicator bcos there are 2?
Also from drl theres red and black where do they go?
The red wire goes into the parking light positive and the black wire goes into any negative terminal even the parking light negative will do and the yellow wire goes into the indicator signal wire you have to test which of the 2 wires it is
@@bangladeshiscottishvlogs1064 how do you know which one is positive terminal for red wire and how do you test the positive terminal for the yellow wire