Hello there my friend. I am really glad that you found this useful. I will be doing a video dedicated to the node tool soon as it seems to be the tool that a lot of people get frustrated with. Once you get used to using it, it becomes very intuitive but there are still a lot people that struggle so hopefully the video will help.
I did that in the beginning too lol. To be honest, I still sometimes click the offset then think "Where is the node? Why isn't it showing up?", then remember that the Select Tool is still selected 🤣 The Node Tool works in tandem with nearly every feature/Tool in Inkscape. It is one of my favourite things in Inkscape lol #StayCreative
Glad you enjoyed it my friend & thank you for the kind words, they are appreciated. Have fun using the offsets, they come in very useful. To this day, I use them a lot. #StayCreative my friend 😁
Thank you so very much. That is really sweet of you to say. This is why I do these videos. To help other artists become better. Artist are better together ❤
nice video. hoped I see the solution for my problem to get a contur/outline for my object ( a star with 8 tips) in a given distance outside the original star. seems a bit impossible.
Yes, I know what you mean. I showed an example of it at the start but with no context for that method. Thatis on me. My apologies. However, I am going to start doing short-form tips too soon levering the power of YT Shorts so I can definitely show you how 😁
My issue arises after an object is Duplicate, then wanting to add 0.5 inch (for an example) to the Height and Width dimensions of it. Everything starts looking great along the horizontal & vertical straight lines but ends where the curved lines start by not showing the 0.5-inch distance that was added. Can’t show the two objects, but for instance, 1. Draw a rectangle, any size will do, with a Black Stroke & Zero Fill. 2. Using Node Editor, make the lower left vertical side extend outward. as if it is expanding in this area. 3. Duplicate it 4. To the Duplicate object, add say 0.5-inch to the Width & Height dimensions., Change the Stroke color to Red. 5. Place the Duplicated object over the original object and Center both Horizontally and Vertically in reference to the largest object. 6. Look closely at both objects, looking pretty darn good until you come to the blown-out area. It appears & is closer to the original object. I have tried everything, but yelling, reason being people might hear and think I've gone mad. Please help and Thanks in advance.
I know the exact problem that you are having. When it comes to the offset, it is great for creating a border "by eye" but not great for that precise design. The way around it is by using a particular Path Effect. The path effect in question is called Tiling. In essence, this allows you to "Tile" duplicates of your object in rows & columns. So if you wanted to, you can have two rows and one column which gives you two of the same object. You can then use the Node Tool to lay one over the other (so it looks like there is only one. From this point, you can use the Path Effect settings to increase/reduce the size of the object in any way you like. I have other videos that showcase this, but I have been asked about this a lot, so I may do a Short in the next day or two. If you still need help, email buttonpressgraphics@gmail.com & I can happily walk you through it step by step. Hope this helps 🙏 ☺️
Nice video, very helpful and to the point. I have tried this method with words and I always get some distortion on the letters or numbers. Lines do not move out and the angles and Lind become a jumbled mess. What am I missing? Any help is greatly appreciated. 🙏
Hi Darcy, yes! When it comes to text, it can become difficult as it will sometimes glitch. I can only assume that is what you are referring to. Unfortunately, this is a bug when working with the more complex shapes ie lots of curves and corners. There are two methods to rectify this. Firstly, try to reduce the spaces (Depending on the text font that you use). The less space there is between the letters &/or words will help. If this is still giving you issues, you can use the Tiled Clones Path Effect to increase the diameter of the letters/words as long as you have turned the text into a path first (Object To Path in the Path menu), I also have a video on that particular Path Effect if you are unaware of how to use it. This will allow you to layer objects over the top and increase the size. You can then use the offset to curve the corners if that is what you wish. Although the second option is more complicated, it can give a better result. I hope that this helps but if not, you can always reach out to me via email (buttonpressgraphics@gmail.com) and I would be happy to walk you through it step-by-step 😁
Thank you for the quick reply and a couple of possible solutions. I will give them a try and see how I make out with them. If I need more help I will contact you. Again thank you for your time and knowledge.
@tarundmail I am presuming you are alluding to the fact that using text can sometimes cause it to glitch. Text can be temperamental when it comes to offsets. The more letters there are, the more likely the glitch will happen. There are two ways around it. Firstly, you can try using the Offset LPE instead of the shortcut in the menu. Secondly, if you are still having problems, you can use the Node Tool to delete any extra nodes that are causing the issues. If you need any further help, please let me know & #StayCreative
@tarundmail About the issues with the offset? I think that is a great suggestion, thank you. There are ways around it that I could show. Thank you for the idea, my friend
Fantastic help. Thank you very much! The "edit node tool" was the piece I was missing.
Hello there my friend. I am really glad that you found this useful. I will be doing a video dedicated to the node tool soon as it seems to be the tool that a lot of people get frustrated with. Once you get used to using it, it becomes very intuitive but there are still a lot people that struggle so hopefully the video will help.
Thankyou again Rob, a very well explained and delivered video
You are very werlcome my friend. If it makes you more creative, then I have done my job correctly hehe #StayCreative
The team is reworking the offsit feature it will be more awesome next version of inkscape ❤
They are indeed, I am aware. The devs have been killing it for years now. I am looking forward to what comes next
Very good! I'm from Brazil. I appreciate your voiceover because it allows me to understand what you're saying.
Thank you so much for your kind words my friend. I have always wanted to visit Brazil. I am so happy you have found my content useful 🙂
Every lesson is appreciated! A pleasure.
And it is a pleasure to make them for you! Thank you my friend, I really appreciate that 😁
Thank you! I clicked Dynamic Offset but didn't know to click on the node tool!
I did that in the beginning too lol. To be honest, I still sometimes click the offset then think "Where is the node? Why isn't it showing up?", then remember that the Select Tool is still selected 🤣
The Node Tool works in tandem with nearly every feature/Tool in Inkscape. It is one of my favourite things in Inkscape lol
#StayCreative
So very informative. One I'll watch again. Thanks
Glad you enjoyed it my friend & thank you for the kind words, they are appreciated. Have fun using the offsets, they come in very useful. To this day, I use them a lot. #StayCreative my friend 😁
Thank you for your great videos and explanations. I really appreciate this and always look forward to watching new videos from you.
Thank you so very much. That is really sweet of you to say. This is why I do these videos. To help other artists become better. Artist are better together ❤
You are so right. Thank you so so much. ❤
Thank you for this information it is fantastique to me when i see your tutoriel
Thank you so much my friend. I am very thankful that you have found it useful 😁 #StayCreative
Very cool - thanks!
Thank you so much my friend, have fun using it yourself
nice video. hoped I see the solution for my problem to get a contur/outline for my object ( a star with 8 tips) in a given distance outside the original star. seems a bit impossible.
Yes, I know what you mean. I showed an example of it at the start but with no context for that method. Thatis on me. My apologies.
However, I am going to start doing short-form tips too soon levering the power of YT Shorts so I can definitely show you how 😁
Many thanks, very useful video. Is there a way to do a repeat offset? eg creating 5 paths with fixed distance to each others from an initial path?
There is but not by using the traditional Offset function. There are path effects for that which I will be covering in a future video 😁
My issue arises after an object is Duplicate, then wanting to add 0.5 inch (for an example) to the Height and Width dimensions of it. Everything starts looking great along the horizontal & vertical straight lines but ends where the curved lines start by not showing the 0.5-inch distance that was added. Can’t show the two objects, but for instance,
1. Draw a rectangle, any size will do, with a Black Stroke & Zero Fill.
2. Using Node Editor, make the lower left vertical side extend outward. as if it is expanding in this area.
3. Duplicate it
4. To the Duplicate object, add say 0.5-inch to the Width & Height dimensions., Change the Stroke color to Red.
5. Place the Duplicated object over the original object and Center both Horizontally and Vertically in reference to the largest object.
6. Look closely at both objects, looking pretty darn good until you come to the blown-out area. It appears & is closer to the original object.
I have tried everything, but yelling, reason being people might hear and think I've gone mad.
Please help and Thanks in advance.
I know the exact problem that you are having. When it comes to the offset, it is great for creating a border "by eye" but not great for that precise design. The way around it is by using a particular Path Effect. The path effect in question is called Tiling.
In essence, this allows you to "Tile" duplicates of your object in rows & columns. So if you wanted to, you can have two rows and one column which gives you two of the same object. You can then use the Node Tool to lay one over the other (so it looks like there is only one. From this point, you can use the Path Effect settings to increase/reduce the size of the object in any way you like. I have other videos that showcase this, but I have been asked about this a lot, so I may do a Short in the next day or two.
If you still need help, email buttonpressgraphics@gmail.com & I can happily walk you through it step by step. Hope this helps 🙏 ☺️
Nice video, very helpful and to the point. I have tried this method with words and I always get some distortion on the letters or numbers. Lines do not move out and the angles and Lind become a jumbled mess. What am I missing? Any help is greatly appreciated. 🙏
Hi Darcy, yes! When it comes to text, it can become difficult as it will sometimes glitch. I can only assume that is what you are referring to.
Unfortunately, this is a bug when working with the more complex shapes ie lots of curves and corners. There are two methods to rectify this. Firstly, try to reduce the spaces (Depending on the text font that you use). The less space there is between the letters &/or words will help.
If this is still giving you issues, you can use the Tiled Clones Path Effect to increase the diameter of the letters/words as long as you have turned the text into a path first (Object To Path in the Path menu), I also have a video on that particular Path Effect if you are unaware of how to use it. This will allow you to layer objects over the top and increase the size. You can then use the offset to curve the corners if that is what you wish.
Although the second option is more complicated, it can give a better result. I hope that this helps but if not, you can always reach out to me via email (buttonpressgraphics@gmail.com) and I would be happy to walk you through it step-by-step
😁
Thank you for the quick reply and a couple of possible solutions. I will give them a try and see how I make out with them. If I need more help I will contact you. Again thank you for your time and knowledge.
@@darcykelly6199 It is my pleasure my friend #StayCreative
Thank YOu..!!!
You are very welcome my friend 😁
How you do the effect with fonts
@tarundmail I am presuming you are alluding to the fact that using text can sometimes cause it to glitch. Text can be temperamental when it comes to offsets. The more letters there are, the more likely the glitch will happen.
There are two ways around it.
Firstly, you can try using the Offset LPE instead of the shortcut in the menu.
Secondly, if you are still having problems, you can use the Node Tool to delete any extra nodes that are causing the issues. If you need any further help, please let me know & #StayCreative
@@ButtonPressGraphics Thanks. Hoping you would make a video on that in future.
@tarundmail About the issues with the offset? I think that is a great suggestion, thank you.
There are ways around it that I could show. Thank you for the idea, my friend
@@ButtonPressGraphics Yes. Thanks