Soft Brake Pedal Fix and Bleeding Brakes
Вставка
- Опубліковано 15 жов 2024
- 🤗 Welcome to Vegas RoManiac Channel 🤔 U Ever wondered what I use when I ride or fix my bike !? 🤨
😍 I ride on this Knobby REAR TIRE - amzn.to/2MQm5lM
😏 I ride on this Knobby FRONT TIRE - amzn.to/2NOmXEa
😲 My favorite Tire mounting compound - amzn.to/2NNH999
🤩 My favorite motorcycle tie-downs - amzn.to/1ifGRaa
😀 My favorite air filter for the money - amzn.to/2QaKRLI
😃 My favorite Oil Filter - amzn.to/2QaLd50
😉 My favorite Magnetic oil drain bolt - amzn.to/2Q6McTO
😘 My favorite Micro Car jump starter - amzn.to/2MQmQv8
🤗 For more items you can visit MY STORE ON AMAZON 🤗
👉 www.amazon.com... 👈
One of the best and simplest to understand ‘how to’ videos I’ve seen. Much appreciated.
Glad it helped
Thanks for this. You explained in 2 minutes 30 what others take about 30 minutes to do what with all their blah blah.
Short and to the point :)
Yeah I always try to make the videos short
Rufinoman exactly lol
Good job, alot of ppl dont know how to bleed brakes properly. You showed how to do it correctly!
Best tutorial ever, straight to the point and easy to follow
Glad it helped
Literally just followed your steps and fixed what I thought might have been a more expensive problem. You’re a legend!
Thanks man
Thank u. From break I never had a problem with leading back-break just gave me a problem with the new cylinder. About to try it out you explained it very easily
Excellent example mate really well explained thank you so much 👍👍
Super simple great video! Thank you for sharing.
I'm happy you liked it
okay so i’ve done the brake like 3 different times and they still won’t work like how yours are in the beginning of the video. any idea what’s wrong ?
Straight to the point. Great🎉
Super helpful, very grateful, thanks
Hi, i hear a hissing sound and the brake is still soft after bleeding. What to do?
Good video, also you can cut the bleed hose to about 12 inches long block the end, cut a small slit in the side near the end. This acts like a one-way valve when you bleed. I have one already prepared which I use all the time but you method works well too
Do you do the same thing if your bike had 2 release pressure valves?
Or, do just one?
Release pressure valves ?
@@vegasromaniac You called them
"Bleeding Screws"
There are 2 on my MC's rear brakes.
BTW; They are "valves" (mechanically speaking). 😁😁
Excellent. Thanks
Thanks man you helped me a lot 💐
Glad it worked
Hi I just want to ask for a we bit off help I bleed my back brake on my quad bike its abit soft dose that mean its still got air in the system can you help
This helped!
My rear brake caliper piston isnt clicking in and locking the brake only the slightest bit, soft brake pedal too. Will this fix my problem?
It's defenatly a start
@@vegasromaniac thanks for the quick reply much appreciated! I changed my brake pads just b4 and the piston was to far clicked out so i forced it back in with a c clamp, squeezed my new brake pads in and now theres no pressure on the pedal and the piston isnt clicking out? It was before I fitted them though...
U r the best
Please correct me if I'm wrong but I thought Dot 4 was used in all motorcycles especially because of the smaller quantities and higher temperatures.
yes you are correct, book said dot 4 , I used dot 3, only because the temp difference is 30 deg, and doesn't do much, also they spec the bike for competition and I can barely ride so ill never use the bike to that point that it will boil the fluid .... but yes you were right .... as far as the numbers goes
Im a bit late but i just use 2stroke engine oil😂😂👍works really well and can take the heat
Mine doesn’t create any pressure, the nipple in the reservoir doesn’t push anything.
Did you find out what it was??
@@jonathanmireles3071 Yes, I had to replace the master cylinder internals.
my mechanic came over to bleed the rear because it didn't work but he couldn't fix it. Does anyone know what the problem might be?
Bad seals? Is it leaking?
Vegas RoManiac its not leaking
I’ve tried this method and my brakes still won’t build pressure. Just one day had no pressure thought MC was bad, got a new one and the brakes won’t blew properly
It worked everytime for me.. I'm sure you can huh a bleed kit cheap from harbor freight
@@vegasromaniac ok bc my pistons in the caliper wasn’t wanting to move any but I got them to push on out a bit more but still won’t build enough to grab the disk. And when I bleed them there is nothing but fluid coming out.
@@blainemathis985 needs a new master cylinder happened on one of my bike i tried to bleed the brakes but didnt work it happens when the piston seizes
@@blainemathis985 i got the same issue. Found the solution?
0:59 He swore!
Its just easier to fill up the bottle with a bit of brake fluid submerge the line in and just pump, no need to hold break
Hmm, not sure if I understand corctly but I'll try
@@vegasromaniac yes just have the line submerged in the bottle inside fluid and pump the brake untill you see no more bubbles; so when brake comes back up instead of taking in air it will take fluid and just make sure you top off reservoir
@@carloscervantes618 that makes sense.. I understand now, only problem I see, is that usually I want to get rid of the ugly dirty fluid already in the caliper so that will contaminate the entire bottle.. But yeah I see how it works now. Have you seen the one with the bottle sprayer?
@@vegasromaniac so what i do is i try to removed the most of the old fluid out and toolp off with new fluid before you bleed, and no i have not herd of the spray bottle how does that work?
Damn, this isn't working for me