FN502 Problems Solved?
Вставка
- Опубліковано 4 вер 2024
- I think I may have finally worked the gremlins out of the fn502 and seems to be running better. It feels properly sprung with the p250 recoil spring from Taylor tactical and stainless guide rod.
Follow me on social media:
www.buymeacoff...
/ 1yankeecowboy
/ 1yankeecowboy
****************************************************************************
Gear Used To Film This Video:
Camera: DJI Pocket 3
Camera: Sony a7iv
Camera: Sony FX30
Camera: DJI Osmo action 4
Lens: Sony 24mm f1.4 G Master
Lens: Sony 16-35 f4
Mic: Holyland lark max
Audio Recorder: Sony ICD-UX570
Monitor: Atomos Ninja V
Filter: Tiffen Black Pro Mist 1/4
I have the tactical version with threaded barrel..... it runs very well suppressed & unsuppressed..... suppressed i use suppressor ammo, & unsuppressed i use Wolf match target 40gr, or Federal in blue box, i think its 38 or 40gr
I had the same issue initially, so I called FN and recommended CCI ammo and fps above 1240. So I've been using "Mini Mag Hollow Point (1260fps)". Not one single issue since. I tell you what, she is picky. Give it a try, I promise she will be awesome after.
at this point I'll try anything. thank you
@@yankeecowboy please let me know!!!
Mine was 100% ammo. Feeds and runs perfect on CCI red tips. Got 200 straight with not a single FTF or extraction issue
@@swedecollection5582 good to know i will try that
Thank you I’m very excited about this. I really really want to like this gun and I’ve been having similar issues. I’m hoping this will fix all of the issues that I’m having the P250 spring will help a lot. It looks like.
@@Truth.Love.Liberty still has issues but I’ll work it out
@@yankeecowboy let me know what you find out man with your updates. I’m trying to fix mine also I just ordered the spring and stainless steel rod
@@Truth.Love.Liberty will do
After i sent 1st one back. And got my new one from them the 2nd one im at or close to 1000rds zero issues. Unless i use federal automatch lmao. That stuff is a waste off good brass an powder 😂 Remington thunderbolt Remington golden Cci standard cci blazers no problems. Faster i pull trigger faster it eats. Now my mags are same i opened the lips about 1.5mm so ammo slides out easier...
I may have to try that with sending it in lol
I sent mine in about a week ago. Same issues, slide wont battery, FTF, and my 13 round mag fell apart. Base plate issues. I found that it doesnt like Aguila ammo. Not sure which one but its in a red box. I hope I FN fixes the issues or sends a new gun. I bought my wife a Taurus TX22. I like shooting that one more than the FN ,with all its issues.
@@diy_landlord that’s what the masses say but I’m going to hope I can work her out. I do love the pistol
I had the same problem, but mine won't eject the spent casing, different ammo used, but when I took a close look at the barrel where the spent casing is sitting in I compared all my other Guns and their countersink on the barrel opening are all a bit deeper than the 502, all the .22lr I have are a deeper countersunk.
Seems like there hit or miss from factory but I will get this running right for sure, I’m determined
Take the damn optic off and get it running right then try the optic again. Unless you eliminate every possible cause you’ll never get it right.
Can you make a video of you putting on the red dot plz I need a tutorial I’m new to red dots and this pistol honestly. Would appreciate it very much I know they come with the rails and everything just need the information on which one and I’m more of a visual learner. Thanks
Do to UA-cam’s policies I don’t film any installations anymore. I can tell you this much it’s only two screws so you really can’t mess up and only one of the plates fit so it’s basically fool proof. I am looking into doing these types of videos and posting on my buy me a cup of coffee support page, link in description. Maybe we can do it there
What ammo do you use? I have had some issues with my Fn502 and the ejector. Certain rounds would seem to be stuck and the ejector would not be able to eject the case.
Many federal and Winchester
Try using cci 36 grain varmint with that full size red dot could be weight issues on the slide
@@davidwarring1572yes I agree go with cci in 36 grain I own a502 their picky after I used the cci runs like a champ
Could the failure to feed issue, be a mag issue? Maybe keep track of which mags fail to feed. Waiting to pick my 502 up (WA state sucks) and already ordered the stainless guide rod and p250 spring lol.
Yes I have 4 brand new FN mags but what I’m trying now is keep them loaded to try and relax springs a bit. The guide rod and p250 spring make the pistol feel sprung properly compared the the flimsy stock spring.
@@yankeecowboyI've put 1000 rounds through mine now and I've only had a few jams. I think the slide locked back once but that could have been my grip pressing up on the release. I did have a round fly out of the chamber instead of chambering last time I had it out which was weird. Just ordered the votatu optic for mine. Only real issue I have had is the pin on the handle and pin by the slide release working their way out. Mine hits about 3 or 4 inches high. Does yours do that?
@@Daniel-hq7gj no because I’m running the red dot it hits spot on. I think before I put dot on it was.
@@yankeecowboy do the sights still co-witness with the dot despite the adjustments for elevation?
@@Daniel-hq7gj yes
Well, I hope the problem has worked itself out. Nothing more annoying than a gun that won't work!
Yeah occasional hiccup but I ran a bunch off camera and was 100% better, guess I just need to leave it be and run the new spring in. Thanks for watching!
"Pretty good" is not good enough for steel challenge.
Any Updates on the problem?
Not as of yet I want a couple more range sessions before I make another video.
@@yankeecowboy Sounds good, I subbed to get notifications
@@Infidel67 right on! Thank you!
@@yankeecowboy me too! If you make an update video please include ammo type/weight, and if the feeding issues are from a specific magazine or just random. Thank you and keep the content coming!
@@diy_landlord will do and thank you!