Going Off-Grid with Sungrow SH25T + SBH Batteries or SH10.0RS + SBR Batteries | Supply Partners

Join Andrew from the Supply Partners Technical Team at the Solar and Storage Live conference in Brisbane for an in-depth look at Sungrow's hybrid inverters. This technical breakdown highlights their versatility for both on-grid and off-grid applications, featuring the single-phase 10kW inverter and new three phase 25kW Hybrid Solution with SBH batteries. Discover the benefits of these inverters with their flexibility, PV oversizing and seamless generator integration.
Featured in the video:
- Sungrow SH10.0RS | 10kW Hybrid Single Phase Solar Inverter
- Sungrow SBR HV Batteries
- Sungrow SH25T | 25kW Hybrid Three Phase Solar Inverter
- Sungrow SBH HV Batteries
Supply Partners are proud to be an authorised Australian distributor for Sungrow and these new solutions. If you are an installer and want more information on this solution, contact our team.
💻 Your Partner in Distribution: www.supplypartners.com.au
📞 Call 1300 SUPPLY

[@arifmushtaq9136]

Sir can i install sh 10ort without bateries ?

[@kairooneeru8981]

Hi Andrew. Do you supply these internationally.? particularly, pacific islands.?

[@SupplyPartners]

Hi @kairooneeru8981, Yes, there are times when we do sell equipment for delivery outside Australia, so please feel free to reach out via our website. Depending on where you are located, there may be differing access to manufacturer warranty and technical support.

[@tobi3563]

Can I connect multiple sbr storage units in parallel?

[@SupplyPartners]

Hi @tobi3563, Yes, you can connect multiple SBR stacks in parallel to achieve a higher capacity. Up to 100kWh total.

[@andyalways8081]

Hi Andrew, nice video.. If you have a 15kw inverter 3P what rate of power can the battery charge take ie 5kw allows normally about 4.5kw charge rate into the battery, based on that does that mean if you have a 15kw inverter the charge rate would be approx 14.5kw going into the battery or 25kw inverter charge into battery 23kw etc,, all just approx figures..

[@SupplyPartners]

Hi Andy, each 5kWh SBH module has a nominal power of 3.52kW so you would want at least 5 for the 15kW hybrid and 8 for the larger hybrid to be able to achieve the inverters continuous AC ratings.

[@johnescobar3199]

Hi, can i load the battery of a Sungrow SH10RT with a generator in Off-Grid?
I´ve been told only the SH10RS can do this and now i see the SH25T can do it too.

[@andrewthomson7554]

Hi, Sungrow does not recommend the SH10RT for off-grid use with a generator but rather the SH15/20/25T inverters

[@johnescobar3199]

@@andrewthomson7554
I would use the generator only by energy shortages during an possible Brown or Blackout as an backup solution. Normaly my System works on-grid.
Do I understand it right, it works with the SH10RT in an emergency situation may be for a short time and Sungrow has possibly optimized the new inversters and recommends them for permamently off-grid, right?
Have you any experience with an SH10RT and a generator?
Thx for the answer and the Video.

[@andrewthomson7554]

@@johnescobar3199 Hi John, the generator integration definitely won't work for on-grid situations even with the new models. When the inverters are installed on-grid, they are programmed with the grid safety parameters. Ie. Australia A. In order for the inverter to work with a generator, the inverter needs to be programmed that it is being used in a micro grid situation, this allows the grid parameters to widen and work with generators.

[@johnescobar3199]

@@andrewthomson7554
Hi, i know i have to disconnect the Grid port from the grid, connect it to the generator and configure a few settings for off-grid. This part is easy and no problem.
My question is only, have you any experience with the SH10RT in off-grid?