Oui elle semble solide. C'est pas qu'elle ressemble un peu, c'est une copie de traxxas slash 4WD 100% compatible avec les pièces traxxas, en gros c'est pas un Traxxas mais c'est un slash 4WD.
Ah oui voila c'est ce que je voulais dire en faite mais je trouvais plus le mot c'est une copie du slash 4x4 traxxas oui toute façon qu'est ce qui n'est pas copié je me demande 😆
Not really. It is an SCT and with my ramp, some cars don't like to take it too fast. I must put full throttle at the last moment to avoid the noise diving.
Switch Off When Not In Use I bought mine from ebay from a Chinese seller called 'Tinaforyou'. They're steel shafts. They come with all the Wheelnuts and grub screws and the Wheelnuts are 8mm so you'll need an 8mm hex driver
Thks. I will need steel CVD, sooner that i was expected XD. (reason why in the next video). I ordered this one : www.gpmracing.com.hk/en/product-detail?id=1738&fid=77&cat=SLASH-4X4 , on ebay, cheaper. Aluminum shock absorbers are also on the way.
Pitch 32 or 48? Spur tooth??
32P
Awesome bashing brotha! Nice jumps!👍👍
Thks, glad you like. I have to control the throttle with this chassis and not take the ramp at full speed to avoid the noise to go down.
Elle marche bien en bruschless malgré les petites cascades 😆 et elle ressemble un peut au slash 4x4 de traxxas c'est un short course aussi
Oui elle semble solide. C'est pas qu'elle ressemble un peu, c'est une copie de traxxas slash 4WD 100% compatible avec les pièces traxxas, en gros c'est pas un Traxxas mais c'est un slash 4WD.
Ah oui voila c'est ce que je voulais dire en faite mais je trouvais plus le mot c'est une copie du slash 4x4 traxxas oui toute façon qu'est ce qui n'est pas copié je me demande 😆
its noise diving, design issue?
Not really. It is an SCT and with my ramp, some cars don't like to take it too fast. I must put full throttle at the last moment to avoid the noise diving.
Upgrade the rear shafts to steel that should resolve the noise dive jumps as it'll add extra weight to the Rear
I will upgrade it if i brake the plastic CVD i think. What steel CVD have you bought?
Switch Off When Not In Use I bought mine from ebay from a Chinese seller called 'Tinaforyou'. They're steel shafts. They come with all the Wheelnuts and grub screws and the Wheelnuts are 8mm so you'll need an 8mm hex driver
Thks. I will need steel CVD, sooner that i was expected XD. (reason why in the next video). I ordered this one : www.gpmracing.com.hk/en/product-detail?id=1738&fid=77&cat=SLASH-4X4 , on ebay, cheaper. Aluminum shock absorbers are also on the way.
Thanks for the upload. Great RC video and, sound track! :]
Thks, glad you like.
Now that's more like it :)
Yes, i prefer it with that speed also.