How To Install A Boost Gauge | Audi S4
Вставка
- Опубліковано 14 жов 2024
- If you caught my video last week, you know that I picked up an AWE boost gauge. This video goes through the process for installing the gauge. This basic procedure is similar for most cars, but I will be demostrating on my Audi B5 S4! I hope this helps!
Note: AWE no longer sells this product, consider ECS Tuning's selection below...
PART LINK:
click.linksyne...
Safety Disclaimer: This is an instructional video. In no way is Modern Engineer or its associates responsible for any damage or personal injury that may occur while following this tutorial.
Affiliate Marketing Disclosure: The owner(s) of this channel may receive compensation from the companies whose products are linked in the description of Modern Engineer videos. The opinions and / or statements of the owner(s) and / or featured personnel are not influenced or biased based on compensation. All compensation is derived via affiliate marketing through a third party marketing agency.
#Audi #Turbo #BoostGauge
success its installed and working thank you for your very informational video
So you hook the line to the fuel pressure line?
Great, thorough video. Gonna attempt this soon!!
Great! Good luck. Let me know how it goes!
DIY Garage will do!!
Just finished installing it, had some trouble with the wiring, but I got it worked out and it looks amazing!!! Thanks for the awesome installation guide!
where did you buy that pioneer ? and how hard was it to install?
Should I unplug the battery. Everything pretty much points to it but I’ve never seen a vid mention it
Why would you wanna splice the boost hose into the fuel pressure line??
Realized it’s not an actual rubber line, there’s a line hooked up coming out of the intake manifold that goes into that regulator
No need to fuse the power wires?
Do you know if it will work on a 97 A4 b5 1.8t?
Yes, the vent pod geometry is the same, however the vacuum line will be in a different location and the wiring may be different.
Nice video, Did you have to cut a circle out of the vent flaps to fit the gauge into the vent or was a new vent sent with the gauge?
SoggySteve06 the vent mount was part of the kit (I.e. a vent with a hole in it).
Did that carbon fiber come with that car or did you do it yourself?!
Wrap
my bosst gaudge turns on bit dosent read anything
Rafael Blanco are you installing it into an Audi?
DIY Garage yea my audi a4 2006 the boost gaudge dosent move when i start it up or drive but lights up . needle only moves when i conect it to power but it dosent set at 0 its stays at -20
Rafael Blanco -20 makes sense at idle, but you should get some movement on revs. Can you walk me through your process? How did you wire it? Where did you splice the boost hose.
DIY Garage i did white to power red to power gren to power also and i grounded black . the sending unit just pluged it to back of gaudge and got my vacume conected
This link is a PDF of the instructions I used. Make sure you followed these instructions and if you still need help - email me at diygarage.coorporate@gmail.com and we can have a more in-depth conversation. Hope this helps! www.vaglinks.com/docs/audi/b5/s4/awetuning.com_center_vent_gauge_b5_s4.pdf