Thank you. Everyone else advising a screwdriver (or spudger) to the outer edge of the bezel, not clicking it off with fingers from inside.... Looks like I will be able to sort out the poor contact or possibly dry joint or track damage near the mains input socket. Another working one not for the skip yet!
This worked pretty much the same for a E1909Wf. A few years ago because I suspected I had bad capacitors and forgot how to disassemble it and now is not powering on again and I suspect is the same problem, you saved my life since I can't live with only one monitor and the other backup I had died
Good morning mate. How lucky I was, I've had this monitor for years and I didn't know how to disassemble it! My mother left it exposed on the furniture in the sun and the screen was smudged (darker at the lower end of the left side 90º). Would I have to buy a new screen or a polarizer?
Just bought a Dell monitor e2209wf saturday at a thriftstore for 25€ . It's as new . My old Samsung syncmaster 225bw from 14 years old has stopped worked it has some smoke and fire odor so it's dead . Proof those old monitors were monsters and were solid like rock back then Something we cannot say today some newer Led monitors are giving up after max 5-7 years .
Great job. If I have a white mark that appears on black backgrounds, do you think it's possible to repair it? Replacements are super expensive because it's an in-cell Thinkpad touchscreen.
4:25 Does CCFL backlighting use gas for their lamps? Also, the LEDs shown right after the CCFL on this video are for direct-lit or edge-lit type of panels?
@Fan of Leafnation What is an inverter board? Does it help with picture quality and/or reduced negative symptoms such as backlight bleeding, IPS glow, etc?
hey, is there a way to convert a monitor to take power directly from DC? Like in LG monitors? Simply bypass the inverter from 220 (or 110) volts and use the required power in DC? Benefit is huge - u can power ur monitor from a power bank. I got an upgrade of my monitors from 22inch LG to 27 inch dell - Dell S2721DS but those dells connect directly to 220 volts outlet. What the shit. Now I cannot power them from power bank, or if powered from Bluetty power station, there is only an option to power them from a AC plug. Which means doble conversion of power. Which is unnecessary and inefficient. Monitors use only 15 W of POWER. It's same as the old monitors, but can't power them cuz there is no DC plug on the monitor... So, I'm searching for a way to bypass the innate converter and supply the DC power directly. Any experts that can help me please? It's really necessary option for Ukraine.
Hi K-nemo Any chance you could disassemble a dell 1905fp? Got down to the screen but now several bezels and shells etc - I want to get at the backlights to test them?
@@k-nemo Thanks. The outer bezel doesn't come off as per your example because the screen pcb is attached by very fine tape. Does this, and the pcb, have to be removed to get at the inner bezels and then the backlights?
I have a Dell 2009wt 20" monitors; and it has developed horizontal lines (bunched together, about 1/2" thick) across the entire with at the bottom of the screen, so blocking out any apps and anything in that area. What do you think is causing the problem?
@@aubriewest1135 No. I couldn't get the screen frame off. However, I still use the monitor, though. I've moved the Taskbar to the top of the screen where I can now see it. If there are pictures and texts, etc at the bottom of the screen that I can't see, I minimise the screen. I'll be replacing it with a new curved shaped monitor as a Christmas present for myself.
i have a similar dell monitor, the 24' version. do i have to take apart everything like this to get to the CCFLs? i need to change them. cant i just remove the big metal frame with everything sill on them? thx
Thank you. Everyone else advising a screwdriver (or spudger) to the outer edge of the bezel, not clicking it off with fingers from inside.... Looks like I will be able to sort out the poor contact or possibly dry joint or track damage near the mains input socket. Another working one not for the skip yet!
I'm glad I could help. Thanks for your comment.
This worked pretty much the same for a E1909Wf. A few years ago because I suspected I had bad capacitors and forgot how to disassemble it and now is not powering on again and I suspect is the same problem, you saved my life since I can't live with only one monitor and the other backup I had died
I was wondering where the screws were in the monitorthanks
🙂
Can you make a DIY about combining 4-6 LCD Glass panels to form ONE single continuous screen managed by Windows 11 or MacOsX? Thanks
Thanks dude. I haven’t found anybody with LEDs for a CCFL 2007FPb, have you done it before or know of one that’s compatible? Thanks!
Good morning mate. How lucky I was, I've had this monitor for years and I didn't know how to disassemble it! My mother left it exposed on the furniture in the sun and the screen was smudged (darker at the lower end of the left side 90º). Would I have to buy a new screen or a polarizer?
Thank you
hey any idea what is the name of the first sheet you remove from the screen at 4:27? it has kind of a lens effect right?
No. This is not a Fresnel lens.
Just bought a Dell monitor e2209wf saturday at a thriftstore for 25€ . It's as new .
My old Samsung syncmaster 225bw from 14 years old has stopped worked it has some smoke and fire odor so it's dead . Proof those old monitors were monsters and were solid like rock back then
Something we cannot say today some newer Led monitors are giving up after max 5-7 years .
😮
@@k-nemo
😯
@@defiraphi 🤩
How old is that monitor? The CCFL technology is a little dated, but I think the CCFLs give better lighting, as it's more uniform. Thank you 🤓
Thank you. Very helpful.
You're welcome!
Great job. If I have a white mark that appears on black backgrounds, do you think it's possible to repair it? Replacements are super expensive because it's an in-cell Thinkpad touchscreen.
Thanks for watching :) You will find the best advice on computer forums. Sent a picture there so people know exactly what the problem is
Szia, ami a végén benne van azok a neoncső-szerűségek. azokat hány Volttal lehet meghajtani?
I want a monitor with CCFL backlight. How do I know which to buy?
4:25 Does CCFL backlighting use gas for their lamps? Also, the LEDs shown right after the CCFL on this video are for direct-lit or edge-lit type of panels?
CCFL has gas inside.
I showed the LEDs to show the newer solution.
@@k-nemo Therefore CCFL has reduced lifespan compared to LED, correct?
@Fan of Leafnation What is an inverter board? Does it help with picture quality and/or reduced negative symptoms such as backlight bleeding, IPS glow, etc?
@Fan of Leafnation What?
@@selfelements8037 bruh
I want to know you replace the leds for it
Very Good Thanks !
Our pleasure!
Dzien dobry. Moj monitor podczas wlaczania swieci sekunde i mocno sie przycidmnia. Wie pan jak to naprawic? Dell p2411hb
Есть ли продолжение - как установить LED светодиодную подсветку на монитор Dell ????
Нет.
où est-ce que l’on peut trouver un écran de rechange pour son moniteur ? 😅
Chez le fabricant.
Nice video 👍
Thanks 👍
hey, is there a way to convert a monitor to take power directly from DC? Like in LG monitors? Simply bypass the inverter from 220 (or 110) volts and use the required power in DC? Benefit is huge - u can power ur monitor from a power bank.
I got an upgrade of my monitors from 22inch LG to 27 inch dell - Dell S2721DS but those dells connect directly to 220 volts outlet. What the shit. Now I cannot power them from power bank, or if powered from Bluetty power station, there is only an option to power them from a AC plug. Which means doble conversion of power. Which is unnecessary and inefficient.
Monitors use only 15 W of POWER. It's same as the old monitors, but can't power them cuz there is no DC plug on the monitor... So, I'm searching for a way to bypass the innate converter and supply the DC power directly. Any experts that can help me please?
It's really necessary option for Ukraine.
Hi K-nemo
Any chance you could disassemble a dell 1905fp? Got down to the screen but now several bezels and shells etc - I want to get at the backlights to test them?
I don't have one. Sorry.
@@k-nemo Thanks. The outer bezel doesn't come off as per your example because the screen pcb is attached by very fine tape. Does this, and the pcb, have to be removed to get at the inner bezels and then the backlights?
je pense que beaucoup de gens ont regarder la vidéo car ils ont démonter l'écran et n'arrive plus à savoir dans quelle sens va quelle pièce 😅😅
J'espère que la vidéo a été utile.
@@k-nemo oui beaucoup, je ne savais plus dans quelle sens remonter l'écran après avoir changer le rétro-éclairage 😅
I have a Dell 2009wt 20" monitors; and it has developed horizontal lines (bunched together, about 1/2" thick) across the entire with at the bottom of the screen, so blocking out any apps and anything in that area. What do you think is causing the problem?
Did you fix it? I do have the same problem with my display, vertical green line!
@@aubriewest1135 No. I couldn't get the screen frame off. However, I still use the monitor, though. I've moved the Taskbar to the top of the screen where I can now see it. If there are pictures and texts, etc at the bottom of the screen that I can't see, I minimise the screen. I'll be replacing it with a new curved shaped monitor as a Christmas present for myself.
now.... Where TF can I find a replacement screen?! :x
China? Aliexpress?
i have a similar dell monitor, the 24' version. do i have to take apart everything like this to get to the CCFLs? i need to change them. cant i just remove the big metal frame with everything sill on them? thx
I'm afraid not. But it may be built differently. Try.
😉👍 top d+
Thanks for watching
Дуже корисне відео. Розібрав монітор, нічого не відірвавши, перепаяв потікший конденсатор. Монітору то не помогло, але відео все-одно дуже допомогло.
Дякую за перегляд :)
Isn't there a simpler board out there to power the LCD alone without all this crap?
All I need is the HDMI port!!
There's a very little bug inside mine, wish i didn't have to do all this
Jesus Christ. That music!
Wrong model, thumbnail looked like mine.