+Turd Ferguson you typed " it has the same firing order as any American V8". American V-8's all do not have the same firing order. It's simple to understand. And some of the V8's have exactly the same firing pattern as V8's mad in Japan or Germany. It's no biggie, relax... I was just clarifying
It's been done... with cars it doesn't work that well because these micro engines have hardly any torque. So they crawl around at high revs. But there's a video of an rc v8 speedboat around, and it's absolutely badass.
@@Motorsheep this sounds like it might be a little bit more than most of the others, The thing to do now is design a multi speed transmission to get the revs down and the speed up.
@@jerrydoll7275 Looking at my reply 3 months later, I'm wondering if my statement about torque is even true. The engine should have quite enough torque at lower rpm's. Perhaps the issue is simply that combustion engine powered rc cars usually have centrifugal-force-actuated clutches. They don't engage at low rpm's, so you need a short transmission ratio. I don't know if servo clutches are a thing off the shelf, probably not. So that's what you'd need to make this work I guess.
Why is UA-cam recommending 8-9 year old videos to me? I have a Minecraft vid from 2011 and a song from 2010 and now this??? UA-cam algorithm FINALLY working!!!!
Lmao..i had a 2006 spider documentary video about giving the some drugs....it messed up my brain than the heroin did Edited:like i said...it messed up my brain that makes my grammar shittier..i have to edited some of my grammar Edited:again... 3rd time edited:ua-cam.com/video/sHzdsFiBbFc/v-deo.html Enjoy
Well done old son.You make an old hot-roders heart thump with Joy.I am an engine machnist andnthis is a piece of beauty by anyones thoughts.Thank you so much !!!!!!!!!!!!!
Mikey Hue I question it’s validity but I could be wrong, the heads don’t show any exhaust ports and with a typical v8 like this one ua-cam.com/video/NPNmI6D2T2c/v-deo.html That does. Check that little one out too.
Now the world can finally have V8 chainsaws, vacume cleaners ect. without having to get an engine out of a fucking vette. My dream of a V8 powered blender may come true... Don't ask why I need a V8 powered blender...... 0.o
@@jorgey4 as I assume you already know the 2-stroke vs. 4-stroke is relating to the number of piston Strokes her Revolution. The adding oil to the fuel was only done to simplify a small engines oiling system the same reason this gentleman did so.
The sound was surprising - just shows you can't take the rumble out of a V-8 no matter how small you make it. Gearheads all over tip their hats, Jim. Great work. Love the valve covers and the name.
Cliff Lowrie I'd buy them and put Briggs and Stratton out of business putting them on lawn mowers, snowblowers, table saws, portable saw mills, and scale RVs, planes, copters, boats, and drones!
I've been a mechanic for close to 40 years, not much impresses me. You sir, have impressed me. I'd love to see a video during construction and the internal components. Many people just watching this may not be that impressed because they don't know the extent of time, engineering, fabrication, creativity, and construction. Great job, something to be very proud of. Thanks for sharing your video.
After watching this video, I went on a little bit of a SMALLEST V8 binge. After watching quite a few, I think yours sounds the BEST. Even some of the videos I watched, they'd put mods on there engines........blowers,turbos etc. AWESOME JOB SIR........JUST AWESOME.
Sounds like a cammed up small block both at idle and when you crack the throttle. Impressive!. Can't believe I missed this video for 9 years. Awesome job James.
@Bringer of Death Only some parts, and that's not a problem. Most products use components made by other manufacturers. That's common practice. The product he made with some of these components is his product and he can sell it as his own. The big problem is his labour cost. Unless he can find a way to manufacture the block, crank, cam, heads, etc. In an efficient enough manner to keep the cost below what people are willing to pay.
Very cool Jim. Nice work. That thing sounds fantastic and it runs so nice. I loved the mini roars when you revved it. Great engineering work. Well done. Thanks for sharing. Ever think of building like a 1/4 scale R/C car around it?
Rick Perez He should totally go for it right? That would be so cool to see. All he would need to do is hook up a drive shaft to a differential if he wants to make it direct drive, and a servo and speed controller will take care of the throttle.
Jim,,, I sat glued to the screen and glued to every word,, I believe victory 44 is definitely the smallest running V8 in the world,,, I'm just amazed at your skills and knowledge... Victory 44 is a fine looking , sounding miniature V8, I'm just astounded by the workmanship you have put in.. the tiny distributor.... and having built the V8 from your own design,, and just one single carborator,,,,,,,off a Os ... Thank you for your video Jim... And please know you have inspired me to move on with some of my own little inventions... GOD bless you and your loved ones..🙂 BiG LOVE from NEW ZEALAND 💕..
EG Bros. I've got nothing against Honda, they make good engine's, just don't have much torque. I used to own a EP3, was a good car and was quick but you had to rev the nuts off it to get anything from it, sold that for a 1.8t golf and now got a tuned diesel 3l BMW which is quicker than the Honda and golf.
252 people are complete idiots. This engine is an incredible creation. You are one talented dude! Ps I think that could actually power one of those new Chinese 2 seater cars that weigh like 50 lbs jaha
Thank you for posting! My dad raised eight kids, working as a mechanic. My earliest childhood memories smell like GoJo and gasoline. I love the sweet sound of your beautiful little engine.
+That Guy With the Pointlessly Long Username That You Are Wasting Your Time Reading Right Now It is truly a beautiful masterpiece this engine! The sound is amazing! You just don't see these kind of engines in such small scales, the guy who built it must probably be a machinist or engineer because I have some knowledge in this field but I couldn't build that!
You doubt the power of directed explosive energy? it might be small but inside that casing is still a shit ton of tiny explosions being farmed for energy.
Bunch of people here cracking jokes about putting this in a car for their pet or whatever, don't appreciate the fact that this guy built a running V8 engine that could fit in your hand
I want to build an rc car for that engine, it would me an old school car, maybe 68 gto hard top. An actual transmission and a diff. Real working suspension and pneumatic tires. The real smallest v8 car to go with. It would be scale to. 44 cc it could easily mimick a 440 ci in that car. Front engine rear wheel drive just like its a working driving model.
Im thinking i wanna build a 1/4 scale off roader just as an excuse to use something like this. Wonder how hard it would be to make this run on nitro hobby fuel?
TheVancen You could probably run it on a 4-stroke aircraft blend, though you would have to replace the fuel lines and gaskets. To run it on anything else would require a massive overhaul. This of course assumes that it runs on standard gasoline.
I would put it in an on road car, my off road cars go through the. Gas motors, I have 3 of these motors, I use to have 7, I run them really hard, I've put them into street racers and if you put the right trans on, it is awesome, and it only costed $800 and about 4 months to build one
Hell, use a Baja 5B clutch use some revo half shafts as a drive shaft, mybe a 2 part one, then hook it into a revo diff with better gears. If you have the skill to make this engine, i imagine you could manage a 2 speed trans like a Traxxas nitro monster truck
I miss going to church, every church I’ve ever been to has a guy like this who could teach you everything you ever wanted to know about anything haha. Although, I’ve never met a guy as genius as Jim. This is truly incredible. I wish I knew this guy, I would just sit and listen to him talk about cars and motors and bore strokes for hours and not interrupt him a single time. God bless you, sir.
This goes to show; no matter what size your v8 is, it will always sound badass
unless its a nissan you could not make a nissan sound good with all the money in the world
Titan sounds fine. Problem is that most of their turd cars don't go above six cylinders
Dr.Beef lol the titan it crap they break all the time but to be fair the others are not much better anymore eather
I never said it was a quality truck. I said it sounds fine, referring to the V8
Its not the size that matters, it is what you sound like with it..... (yes i totally altered a really old dirty joke for this.)
You know this video is plenty old when the man mentions Radio Shack
Probably stopped there on the way back from Blockbuster
🤣
@@liveandletlive2894 Radio Shack is back in business.
Too soon 😔😔😔
Yeah he should've said Circuit City
Im gunna build a hotrod for my pet rat
Reunite as o.N.e11 the dog also could drive around with this Engine😁
Rat rod
*Ralph has joined the chat*
eejif I hate you for that
Why not a rat rod
Me: " I want a car with a Victory 44 V8 engine."
Scotty Kilmer: " Those things are endless money pits. "
Prodigy 😂
Get a Toyota 😂
A small boring 4 cylinder Toyota.
Prodigy lmfao.... 😂
😂
The funny thing is it really just sounds like an American v8 but .1 liter lol
more like 0,45 lt
0.044litre
@@thrashefe3523 so thats a 450cc in your book? 😂
Sounds much better than that loud wasp like sound a nitro engine makes
Has to do with the way the driveshaft is positioned
honey i shrunk the v8 motor
Highfighter219er 😂😂😂😂😂😂😂😂
engine*
Nice still has that V8 sound, didn't expect that
Ikr
Me neither!
+Turd Ferguson American V-8 don't fire (or sound the same).
+Turd Ferguson ..yes, did you? I'll repeat "American V8's do Not have identical firing order". Just pointing out this well known fact. 😀
+Turd Ferguson you typed " it has the same firing order as any American V8". American V-8's all do not have the same firing order. It's simple to understand. And some of the V8's have exactly the same firing pattern as V8's mad in Japan or Germany. It's no biggie, relax... I was just clarifying
This would be the perfect alarm clock ⏰ to wake up to.
Ahhh the fresh air of CO poisoning in the morning.
How the shit did you come up with that as a first thought
I agree as a superior man with value u Ike the other in the comments. It is motivational.
Raphael S HAHAHA literally what I thought! Don't we all secretly love the smell of burnt gasoline and lung cancer though?
It boasts 450 horse powers. I mean, 450 sea-horse powers.
win
+rmwtsou haha
+rmwtsou ha, it really is.
You mean horsefly-powers right?
+J.P. Craven hahaha it gets 1/4 of a mile for the whole tank
Drop this bad boy into a muscle rc car, or a flatottom rc boat. It would be awesome.
It's been done... with cars it doesn't work that well because these micro engines have hardly any torque. So they crawl around at high revs.
But there's a video of an rc v8 speedboat around, and it's absolutely badass.
@@Motorsheep this sounds like it might be a little bit more than most of the others, The thing to do now is design a multi speed transmission to get the revs down and the speed up.
@@jerrydoll7275 Looking at my reply 3 months later, I'm wondering if my statement about torque is even true. The engine should have quite enough torque at lower rpm's.
Perhaps the issue is simply that combustion engine powered rc cars usually have centrifugal-force-actuated clutches. They don't engage at low rpm's, so you need a short transmission ratio. I don't know if servo clutches are a thing off the shelf, probably not. So that's what you'd need to make this work I guess.
Motorsheep it’s 44cc it would work damn well.
9 year old video. But it’s now in our recommended
I’m glad it was.
Stewart little finna tear up the street with this bad boi
Stewart little is cool, but Ralph S. Mouse is a strong competitor. Check out Beverly Cleary's books.
@@rifletargets How could i forget my boi, the mouse on the motorcycle. I heard his new bike runs 9s, it'll give Stewart a run for his money.
rifletargets Stewart Little is the GOAT. Ralph ain’t got nothing on Little
@@rifletargets So I'm not alone in knowing that book. Then again, I never thought to ask.
Why is UA-cam recommending 8-9 year old videos to me? I have a Minecraft vid from 2011 and a song from 2010 and now this??? UA-cam algorithm FINALLY working!!!!
Bob Builder same, but it’s actually cool af
Agreed, it’s on point right now!
Lmao..i had a 2006 spider documentary video
about giving the some drugs....it messed up my brain than the heroin did
Edited:like i said...it messed up my brain that makes my grammar shittier..i have to edited some of my grammar
Edited:again...
3rd time edited:ua-cam.com/video/sHzdsFiBbFc/v-deo.html
Enjoy
Same
2010: No
2011: No
2012: No
2013: No
2014: No
2015: No
2016: No
2017: Not yet
2018: No
2019: OK
it's so funny how a tiny V8 still sounds like it's big brothers. 😂 Great job man definitely looked complicated!
Are you going to put it in the worlds smallest mustang? :P
Then he wouldn't be able to show it off with many people around, you know, crowd logic.
sounds better than my ecoboost ;(
But then it'd have to be a V6
Eric Mueser Thats only EcoBoost Mustangs
mu country only got them ecoboost and it's disgusting to say the least
44cc? Almost the size of the biggest size motor in a moped your allowed to ride at 16 50cc
the difference is that this is 8 cylinders while the moped might have 1 or 2.
also guessing that this is a 4 stroke instead of 2
Well, if the police dont catch you anythings legal, i had a 75cc engine with a after market exhaust. It was pretty fast for a moped at 80km/h
TLBTM Actually 49cc thank you
@@willpitts9957 it varries from place to place. Some places 50cc is legal some places 49 is max.
Nakki_koira Mine‘s a 50cc that rund 90km/h not bad for original!
let's get it on the dyno
'No gender' ? Oh you mean women with dicks. That describes lots of guys nowadays
FetchTheSled cordless drill on a volt meter
LOL
450 SHP (sea-horse power)
Light Blair lmao i’m confused too
Well done old son.You make an old hot-roders heart thump with Joy.I am an engine machnist andnthis is a piece of beauty by anyones thoughts.Thank you so much !!!!!!!!!!!!!
I would LOVE to actually buy a kit from this guy and build one of these myself.
Imagine this on a weed eater 😱 full throttle itll scare the grass so much that it will refuse to regrow
I’d like to see the engine dismantled and see the actual inner workings of it for sure.
That’s what I’ve been wondering. Is it 2 st or does this thing actually have a valve train lol.
Mikey Hue I question it’s validity but I could be wrong, the heads don’t show any exhaust ports and with a typical v8 like this one
ua-cam.com/video/NPNmI6D2T2c/v-deo.html
That does. Check that little one out too.
589 people have no soul. This is inspiring.
888 now.. unbelievable, I'd love to meet one of them. Anyone who dislikes a video like this is a complete waste of air
"Honey, I lost a camshaft in the couch, come help me find it."
44cc ! I could drop this in my go kart and then brag to everyone by saying that my ride has a v8 in it
"muh car's a muscle car"
Na they gotta make a 250 v8. Now that would be real!
@@parkerd.2158 I'd do it more for the sound rather than the performance
Anyone else get this in their recommended in 2019??
Yup, no idea why though, at least it's something interesting for a change
Yup
Nah g i searched for this shit
Now the world can finally have V8 chainsaws, vacume cleaners ect. without having to get an engine out of a fucking vette. My dream of a V8 powered blender may come true... Don't ask why I need a V8 powered blender...... 0.o
To make V8?
Okay, sorry.
A lot of slushy drinks Margaritas lol
waterlubber you forgot to say waca waca waca
Top gear did this a few years back but with an actual V8, might have been a range rover engine.
It was a corvette engine
probably has more horsepower than my subaru legacy
Absolutely fantastic. . a credit to you.. have to ask, are you still married after that .?
If you could design and build one with a cooling system it would make for a great scale model engine.
I could to love one for scx10
Justin S.
don't forget an oiling system, being oiled only in the fuel makes it good only as a novality
@@dondakota920 that just makes it akin to a two-stroke engine.
@@jorgey4 as I assume you already know the 2-stroke vs. 4-stroke is relating to the number of piston Strokes her Revolution. The adding oil to the fuel was only done to simplify a small engines oiling system the same reason this gentleman did so.
Nothing short of excellent-love the sound of a V8 no matter how big.
That's really cool! I'd love to see it taken apart to see the crank, cam, etc.
Imagine a remote controlled car with this under the hood - that would be beyond awesome!
Theres actual RC cars with real engines in them.
Still sounds better than any v6 I've heard
Beets lol
They only decent V6 I’ve ever heard was in a trash can
@@freddybanuelos6132sounds like you haven't heard many then🤔
2 Years ago, I hope you realized the Ford GT has a V6
@@shadic187 The new Ford gt is an embarrassment
The sound was surprising - just shows you can't take the rumble out of a V-8 no matter how small you make it. Gearheads all over tip their hats, Jim. Great work. Love the valve covers and the name.
Roy Martin I would definitely build the rest of the car if i built this small V8! :D
It even has that typical uneven V8 beat.
+Guy Hayklan Dat bit cammin
+Guy Hayklan fricken cool right?!
A cute little engine with a cute little sound, built by a genius.
ROCKINGMAN not gonna lie this thing sounds mean
I want one Jim you need to go into production these would sell like wild fire! great job man sounds like a drag boat!
im with you on him mass producing it it would go like wild fire
Cliff Lowrie I'd buy them and put Briggs and Stratton out of business putting them on lawn mowers, snowblowers, table saws, portable saw mills, and scale RVs, planes, copters, boats, and drones!
tim the toolman Taylor will love it
Pretty darn cool. So much detail, I bet it even leaves oil drops on the driveway.
Must be a hit at car shows
I've been a mechanic for close to 40 years, not much impresses me. You sir, have impressed me. I'd love to see a video during construction and the internal components. Many people just watching this may not be that impressed because they don't know the extent of time, engineering, fabrication, creativity, and construction. Great job, something to be very proud of. Thanks for sharing your video.
I agree...dang those gotta be some tiny main bearings...
After watching this video, I went on a little bit of a SMALLEST V8 binge. After watching quite a few, I think yours sounds the BEST. Even some of the videos I watched, they'd put mods on there engines........blowers,turbos etc.
AWESOME JOB SIR........JUST AWESOME.
You sir have one awesome little engine that really does sound like the full scale v8. Amazing job!
***** right!
Christian Sanden awesome big block sound!
I wanna know the power numbers on this thing
Wow it even sounds like a full size v8 engine, non the less rough idle for that hot rod sound
Sounds like a cammed up small block both at idle and when you crack the throttle. Impressive!. Can't believe I missed this video for 9 years. Awesome job James.
To you sell the kit so we can buy it and put it together it by ourself?
he would probably make a lot of money if you sold kits on how to build it
@Bringer of Death Only some parts, and that's not a problem. Most products use components made by other manufacturers. That's common practice. The product he made with some of these components is his product and he can sell it as his own.
The big problem is his labour cost. Unless he can find a way to manufacture the block, crank, cam, heads, etc. In an efficient enough manner to keep the cost below what people are willing to pay.
That is so totally cool. *thumbs up*
Now you gotta build a little car. ;)
88s10Durango and give it electric ignition then put it in a tiny car
+The nuffield's channel all ignition is electric, do you mean electric starter?
Jimmy Hylton AHEM man power
A scooter.
69 roadrunner driven by a mouse..good luck trying to teach it to use the clutch....lol
Very cool Jim. Nice work. That thing sounds fantastic and it runs so nice. I loved the mini roars when you revved it. Great engineering work. Well done. Thanks for sharing.
Ever think of building like a 1/4 scale R/C car around it?
Yes! my thoughts exactly!!
Rick Perez He should totally go for it right? That would be so cool to see.
All he would need to do is hook up a drive shaft to a differential if he wants to make it direct drive, and a servo and speed controller will take care of the throttle.
Jim,,, I sat glued to the screen and glued to every word,, I believe victory 44 is definitely the smallest running V8 in the world,,, I'm just amazed at your skills and knowledge... Victory 44 is a fine looking , sounding miniature V8, I'm just astounded by the workmanship you have put in.. the tiny distributor.... and having built the V8 from your own design,, and just one single carborator,,,,,,,off a Os ... Thank you for your video Jim... And please know you have inspired me to move on with some of my own little inventions... GOD bless you and your loved ones..🙂 BiG LOVE from NEW ZEALAND 💕..
am I the only one around here that wants to drive it? maybe mount it on an office chair for all I care, just give me a gas pedal
I like you. Can we please work on this idea? I would pay a good amount for a Mini V8 powered office chair.
I don't think it would make as much power as you think it would.
Ryan Cravens 3hp?
ElitePotato8 Depending on the carb I would say .9 - 4 But it would need a real nice carb to get 4.
Hooray for engineering and the men who practice the art. Well done mate.
That thing sounds great! I would love to see it installed on an rc car.
Not merely a "Master Machinist",.... But an "Artist" to boot. TNX 73 SK
Still more torque than a Honda.
Lol
Best comment ever
Not when VTEC is on.
why Hating honda? haha maybe you got kicked with vtec.
EG Bros. I've got nothing against Honda, they make good engine's, just don't have much torque. I used to own a EP3, was a good car and was quick but you had to rev the nuts off it to get anything from it, sold that for a 1.8t golf and now got a tuned diesel 3l BMW which is quicker than the Honda and golf.
turbo yoda will this fit on my honda?
LOL! yesss XD
divizionx LMAOOOOOOOOO
+divizionx I'm sure you can buy a bell housing adapter plate on ebay.
Will fit Honda's Datsuns and pintos....some extra parts required at owners expense...lol
252 people are complete idiots. This engine is an incredible creation. You are one talented dude!
Ps I think that could actually power one of those new Chinese 2 seater cars that weigh like 50 lbs jaha
they are jealous.
Correction ... 302 idiots and counting.
jaha?
309... People these day's, can't even see 3 numbers properly.
I'm sure there are more than 252 "complete" idiots in this world.
Thank you for posting! My dad raised eight kids, working as a mechanic. My earliest childhood memories smell like GoJo and gasoline. I love the sweet sound of your beautiful little engine.
Awesome. Now sir I believe it's time for you to make a V-12
Pure engineering genius!
It is quite fascinating.
But does it have Vtec?
Tell me what the acronym vtec stands for....without using Google..
Uhh... I just know it has something to do with timing.
.....good job I assume you didint use Google...you were somewhat correct. I applaud you Creature James tell tell Aleks "he's a bitch"
+Explorer James Variable Timing and lift Electronic Control. I hate Hondas.
Will S. Yeah, that. Hondas are alright though, if put it in good hands
The first time that thing started had to be an amazing feeling. WOW!. Well done.
Finally! A V8 I could install is my Fiat!
This motor would be awesome on a 1/5 scale RC Truck!
You can probably get more power out of a proper 1/5th engine, but yes this engine would be very scale
+That Guy With the Pointlessly Long Username That You Are Wasting Your Time Reading Right Now It is truly a beautiful masterpiece this engine! The sound is amazing! You just don't see these kind of engines in such small scales, the guy who built it must probably be a machinist or engineer because I have some knowledge in this field but I couldn't build that!
+Yannik A most of the 1/5th engines range from 24-33cc your weed eater
shogunMR Yes, I have one, a 31cc engine!
because the bores are so small it would not have enough power v8s just cant scale stick with the 1 cyliders
That my friend is American ingenuity!!! You should make blueprints and sell them so other people can make them and you earn a profit!
Well done mate,bloody well done!!!! Truly Inspirational, and beautifully crafted. Watched 13 times and still in awe......
That's absolutely amazing!!! Dude you're smart as hell and crafty too! 👍
Would make a great 8 cylinder sewing machine.
I got to say what a piece of art, a lot of work beautiful machine work.
I don't know how I ended up here but I love this video. That's some wonderful work sir.
there is no way that the little thing sounds like a 70s mustang
Believe it man, it does
It absolutely does.
You doubt the power of directed explosive energy? it might be small but inside that casing is still a shit ton of tiny explosions being farmed for energy.
Actually sounds better....lol
Actually sounds better
Your next project should be to make a muscle RC car and put that engine in it! :D
Show this to Scotty Kilmer, he’s gonna rev up this engine!
Well done, we are running out of people who appreciate what is involved with what you've made here.
This is the motor inline 4 turbo guys brag about winning a quarter mile over!😂
3:23 is when he starts it
Thanks cuz
How could anybody dislike this. Only people who dont have the mental capacity to appreciate things i guess
People who don't have it.
Who the hell is disliking this video, this man is an amazing artist.
But will it blend?
Hahaha!
2010:
2011:
2012:
2013:
2014:
2015:
2016:
2017:
2018:
2019: Sure why not
Damn, that's awfully original. Desperate for virtual blue thumbs are we?
David Robinson shut up dude
@@wyattfox7000 I don't think I shall
David Robinson ok🤷♂️
@@davidrobinson2323 Don't ask who Joe is.
Bunch of people here cracking jokes about putting this in a car for their pet or whatever, don't appreciate the fact that this guy built a running V8 engine that could fit in your hand
I want to build an rc car for that engine, it would me an old school car, maybe 68 gto hard top. An actual transmission and a diff. Real working suspension and pneumatic tires. The real smallest v8 car to go with. It would be scale to. 44 cc it could easily mimick a 440 ci in that car. Front engine rear wheel drive just like its a working driving model.
I want to see that too
imagine this in a rc car
Im thinking i wanna build a 1/4 scale off roader just as an excuse to use something like this. Wonder how hard it would be to make this run on nitro hobby fuel?
TheVancen You could probably run it on a 4-stroke aircraft blend, though you would have to replace the fuel lines and gaskets. To run it on anything else would require a massive overhaul.
This of course assumes that it runs on standard gasoline.
I would put it in an on road car, my off road cars go through the. Gas motors, I have 3 of these motors, I use to have 7, I run them really hard, I've put them into street racers and if you put the right trans on, it is awesome, and it only costed $800 and about 4 months to build one
you would need all metal gears llol... man o man that would be awesome
Hell, use a Baja 5B clutch use some revo half shafts as a drive shaft, mybe a 2 part one, then hook it into a revo diff with better gears. If you have the skill to make this engine, i imagine you could manage a 2 speed trans like a Traxxas nitro monster truck
He should stick it in a little rc spitfire plane.
James - very nice job! I can truly appreciate the endless measuring and careful machining it took to built that engine.
She's a beauty James!
Kevin Heart's engine for his car 😂😂😂
Too soon,lol
careful, don't break a finger with that crank
No idea why this is in my recommended, but i'm so glad it is. Very cool little thing!!
I’m waiting for a Scotty Kilmer or Doug score vid we’re they just trash it and say it’s a money pit lmao 😂
Compared to tiny two-strokes, this thing is still massive.
How do we know you're not just a giant?
because they currently dont make a large enough camera for a giant.
Lol
lmao!
I miss going to church, every church I’ve ever been to has a guy like this who could teach you everything you ever wanted to know about anything haha. Although, I’ve never met a guy as genius as Jim. This is truly incredible. I wish I knew this guy, I would just sit and listen to him talk about cars and motors and bore strokes for hours and not interrupt him a single time. God bless you, sir.
hook that up to a library ceiling fan.
The roof would take off
TechnoStickmen LOL
just awesome, what a neat project!
"c´mon honey"..... Thats nice :)
Would you be able to throw that engine into an RC car? That would be truly be awesome. That sound is most impressive.
Why higher revs for such short bursts only?
+NOTABOOS Probably doesn't have a rev limiter. Don't wanna blow it up.
The engine doesn't have any cooling system in it so it would get hot faster
Yup. engines tend to get REALLY hot very fast.
Like any V8 it's they sound great when they start camming.
I happy youtube has brought me here. But idk why now...
This baby build is beautiful. Sounds absolutely excellent!
What efforts were made to verify the world's smallest claim.