Our Brand New Lian Li O11D EVO Setup! | Relaxing Step-By-Step Installation Guide

Поділитися
Вставка
  • Опубліковано 3 кві 2023
  • Wondering what would be the perfect way to enter the custom loop world? Well, this is it! Follow our step-by-step video guide to build your own “Mad Magenta” PC in the Lian Li PC-O11 Dynamic EVO.
    Hardware Specifications:
    PC Case: Lian Li PC-O11 Dynamic EVO
    Motherboard: EK-Mana MSI MAG Z690 TORPEDO EK X D-RGB
    Graphics Card: Nvidia GeForce RTX 4090 FE
    RAM: G.SKILL Trident Z5
    Processor: Intel® Core™ i7-13700K
    Cables: CableMod
    See the full list of water-cooling parts here 👉🏼 ek.tech/List-Mad-Magenta
    This Shop the Loop build expresses what our latest product line, Mana, is all about. The ever-popular Lian Li O11D EVO case is debuting EK’s all-new, side-mounted distribution plate, the EK-Mana G2 PC-O11D EVO DDC D-RGB. It’s also boasting the EK-Mana MSI MAG Z690 TORPEDO EK X motherboard with its own Mana monoblock.
    Get to know EK-Mana G2 PC-O11D EVO DDC D-RGB 👉🏼 ek.tech/G2-Distro-Plate
    More about EK-Mana MSI MAG Z690 TORPEDO EK X D-RGB 👉🏼 ek.tech/Z690-torpedo
  • Наука та технологія

КОМЕНТАРІ • 91

  • @skywalkies77
    @skywalkies77 4 місяці тому +1

    Imagine someone giving you all the tubes pre-bent and cut to size 😍
    Would take away 99% of the stress of building hardline.

  • @S2Hgaming
    @S2Hgaming Рік тому +10

    Thanks to you EKWB and your good guides/manuals. Built my first AM5 custom loop last week - looking awesome!

  • @Cblan1224
    @Cblan1224 Рік тому +16

    At this point they might as well just start selling pre-cut evo tubes.

    • @Owenzzz777
      @Owenzzz777 Рік тому +5

      Pre cut thermal pad first

    • @DC9V
      @DC9V Рік тому

      @@Owenzzz777 At a pre-cut price

    • @moriyokiri3229
      @moriyokiri3229 Рік тому +1

      @@Owenzzz777 I can’t figure out how to use scissors too hard

  • @fairycat
    @fairycat Рік тому +3

    Thanks. Everything is so beautiful.

  • @EKWBofficial
    @EKWBofficial  Рік тому +2

    And remember - ALWAYS test your system for leaks! Learn how to do it here 👉 ua-cam.com/video/b_zsMjQhQLg/v-deo.html

  • @KylerHernadez
    @KylerHernadez Рік тому

    Yasss need the o11D xl in the loop breakdown now!! 😅

  • @spamiser8991
    @spamiser8991 Рік тому +2

    finaly a clip with the ek mana g2 distro 😉 thx!

  • @KnightFanBoy
    @KnightFanBoy Рік тому +5

    Very cool Video! EK, you make the coolest products out there!❤‍🔥🔥 But please, please please please.... a Monoblock for the ASUS ROG CROSSHAIR X670E Extreme would be sooooo freaking awesome!🙏

  • @shawnthye1717
    @shawnthye1717 11 місяців тому +3

    Hope there will be a video like this for the o11 dynamic evo front distro plate 🙇‍♂️🙇‍♂️🙇‍♂️

  • @afireinaleo1771
    @afireinaleo1771 Рік тому +1

    GOD I have such a great idea for a custom loop using this distro plate and my Lian LI Evo! Just wish I had the money to be able to afford it 😞 such a beautiful build on this set up!

  • @Andreas01
    @Andreas01 Рік тому

    Nice. Would love to see mini-itx builds.

  • @tommyTV-72
    @tommyTV-72 8 місяців тому

    nice work

  • @MrFilip121
    @MrFilip121 Рік тому +1

    If I am going to go custom loop, I will get something like the liquid haus ext radiator stand. This way I can fit any radiator size(including 560mm) and don't have to buy new case.

  • @famtsla
    @famtsla 9 місяців тому

    I have this distribution plate in my O11 evo. I don't have a bottom radiator. So I saw a video from you guys that said you can use the fill port for the top radiator to empty in there and avoid that side channel. The manual doesn't say you can do that but you guys mentioned in your video when introducing that distribution plate that you can skip the side channel I guess you call it, if you don't have a bottom radiator. I just wanna make sure that is true. I have the cpu and gpu water cooled. So the loop should work fine. I'm gonna be finishing it up tomorrow.

  • @w3st80
    @w3st80 Рік тому +1

    need to do a video of the same kind building in the o11 d XL with the reflection 2 distro and all 3 radiators being used.
    are they just nitrile gloves ? i see being used a lot in your vids these days by atilla especiallly

  • @Kai_O_Cad
    @Kai_O_Cad Рік тому

    Pretty much my upgrade this week but in white and Lian Li white V2 fans

  • @sandibegic757
    @sandibegic757 Рік тому +1

    tnx for good vibes....

  • @evilways1227
    @evilways1227 9 місяців тому +1

    Are there any variants of this kit where the GPU is mounted with the Upright GPU Kit for this case and the Distro Plate mounted to the front? If not, are there any concerns with a front mounted Distro Plate kit and Upright GPU mounted setup? I'm looking at almost this setup but maybe using the Upright GPU mounting kit for the side mount location to minimize airflow restriction due to hardware being in the way.

  • @techclub8528
    @techclub8528 Рік тому +1

    I have had this distro plate on pre order since early march, please hurry up and start sending them to your UK distributors, oh and EK fittings too like rotaries and extenders are always out of stock in UK.

    • @EKWBofficial
      @EKWBofficial  Рік тому +1

      We're working non-stop to manufacture and deliver our the items to everyone. We're sending out large quantities of our items on a daily basis, so our distributors should receive them shortly.

  • @VitalzTBPlaysComp
    @VitalzTBPlaysComp 4 місяці тому

    Can you show draining this loop. Have exact build and it is impossible to get the liquid fully out, just ran the cleaner for 8 hours, still gotta do the superflush

  • @matacachorro4090
    @matacachorro4090 Рік тому

    Make a video of the dark force build, would be very nice.

  • @ramblinjay3816
    @ramblinjay3816 5 місяців тому

    Instead of the reflection2 distroplate for the Lian Li Evo XL, will this mana G2 work for the XL case? I know online it say's it can't although i figured i would ask here...Seems like it would.

  • @KobraTrading
    @KobraTrading Рік тому

    Will this same build work in a regular O11D with a Gaming X Trio 4090? The 4090 fits in the case no problem, but your website forces me to use a vertical mount, which means I can't have 2 rads (defeats the purpose) and no Distro (also defeating the purpose). Is this correct? The card is much SMALLER without the air cooler, so I don't understand why your "configurator" is forcing me to verticle mount it....

  • @ericdebroux9685
    @ericdebroux9685 10 місяців тому

    Would a D5 pump fit with this exact distro plate and 011D evo ?

  • @fortnighruls1248
    @fortnighruls1248 Рік тому

    This might be a dumb question but is the d in o11D one letter for dynamic

  • @kuzzzzzzzzzzzz7511
    @kuzzzzzzzzzzzz7511 11 місяців тому

    Possible 3 radiator back of distro plate is compatible or not??

  • @PetroshellyShots
    @PetroshellyShots Рік тому

    why did ekwb stopped making glas reservoirs?

  • @jeromelct
    @jeromelct 9 місяців тому

    You never tighten the screws of the bottom radiatior ???

  • @rossodelpadrone
    @rossodelpadrone Рік тому +1

    If you order the latest generation of CPU or GPU coolers from EKWB, then you have to expect a delivery time of 2 - 3 months. I myself ordered a CPU cooler and a GPU cooler in the last week of January. Haven't received any delivery yet. According to the information, if nothing comes up, the delivery should arrive at the end of April.
    Of course, none of this is vital - but I can't understand it.

    • @EKWBofficial
      @EKWBofficial  Рік тому

      Thank you for your patience, we understand the waiting times aren't ideal. We're working hard to manufacture and deliver your orders, while dealing with an interruption in our supply chain. We're putting all our power into resolving this, so we can send out the order to you as soon as possible!

  • @firasmasarweh6975
    @firasmasarweh6975 9 місяців тому

    what thickness rads did you guys use?

  • @channtehmann
    @channtehmann Рік тому +1

    How are thermals in this build? I am looking to basically do the same but concerned about airflow

    • @rickwhite123
      @rickwhite123 6 місяців тому

      Ive got a simular build but 7800X3D processor, Thermals are fine GPU idle is at 29oc - 30oc hot spot, 36-40oc full load ive not seen the gpu over 62oc hot spot 72oc, CPU (Tdie) runs at 39-40oc idle under load upto 72-75oc

  • @ccihangz
    @ccihangz Рік тому

    Why we can not make an order in Europe for EK 185 BATTLE pc?

  • @paulkiejdan2
    @paulkiejdan2 Рік тому +6

    Hey Ekwb, is it possible to do this same build with a vertical mount gpu? Like Clearance with the bracket and keep a bottom rad?

    • @Azzmelater
      @Azzmelater Рік тому +2

      Yes I’m definitely curious as well. I had the same idea in mind. Please respond back ek!!

    • @Manuel_2607
      @Manuel_2607 Рік тому

      I am not EK, but when I go through their configurator and select both the S360 rad on the bottom and the vertical GPU-holder, I get an error message and after that, I can only select a radiator at the top, so unfortunately, I don‘t think it‘s possible… 😢
      With that said, let’s hope EK can prove me wrong

    • @Kyezie131
      @Kyezie131 Рік тому

      No you can't do a vertical mount with a bottom rad in a normal O11 dynamic evo case. You need the XL to do it.

    • @JDLMCLOW
      @JDLMCLOW Рік тому

      There is a way, but requires modding the case. I have basic 011 with the nice blue paint scheme from Microcenter in US. Added black Mnpctech case feet to make the case higher. Made a hole to the bottom for your fans, (Push config up into the case) then rad right inside. Also use the EK- vertical mount kit and it works well. Right in the middle of a hardware update, and reconfig, but it works if your willing to mod the case.

    • @saneldomeh92
      @saneldomeh92 Рік тому +2

      Yes, but wihout the bottom radiator as vertical mount itself needs space of 6 slots at the back(GPU being even bigger), and there is then no room for bottom radiator.

  • @kalitvenec
    @kalitvenec Рік тому +1

    cool

  • @kentg7986
    @kentg7986 Рік тому +1

    Is it possible to Mount the GPU vertically with the Side Distro Plate in the Evo/

    • @saneldomeh92
      @saneldomeh92 Рік тому +2

      Yes, but wihout the bottom radiator as vertical mount itself needs space of 6 slots at the back(GPU being even bigger), and there is then no room for bottom radiator.

  • @lummoxicide1502
    @lummoxicide1502 Рік тому +2

    can this distro plate be used with a radiator at the top and bottom if i'm just going to liquid cool my cpu and not my gpu?

    • @ludovico007
      @ludovico007 Рік тому

      Yes.

    • @saneldomeh92
      @saneldomeh92 Рік тому +2

      Yes. But you will need to conect the two channels that are meant for GPU together so the coolant can flow in a loop.

    • @lummoxicide1502
      @lummoxicide1502 Рік тому

      @@saneldomeh92 ahh ok, makes sense

  • @venividivici4253
    @venividivici4253 Рік тому

    I was able to add 3 radiators inside this case.

  • @savsekdavid
    @savsekdavid 7 місяців тому

    Would this build work with the same components but with lian li uni fans?

  • @Jhon.ih1596
    @Jhon.ih1596 7 місяців тому

    Can I use 2 EK-Quantum Surface P360 radiators in this case?

    • @EKWBofficial
      @EKWBofficial  7 місяців тому +1

      You can use one P360 in the top slot and one P360 in the bottom slot plus there will be room left over for an additional Quantum Surface P280 in the side slot.

    • @Jhon.ih1596
      @Jhon.ih1596 7 місяців тому

      Thank you!

  • @faizannabi7540
    @faizannabi7540 9 місяців тому

    Leak test is missing.

  • @channtehmann
    @channtehmann Рік тому

    Is there room to mount the gpu vertically?

    • @blub9217
      @blub9217 Рік тому

      I can confirm that there is not. The GPU will cover the ports on the CPU block completely. I just figured this out today and will be waiting for the O11D EVO XL to come out before doing a vertical mount.

  • @splindizzle5413
    @splindizzle5413 7 місяців тому

    Just finished leak testing this same build, went on to connect everything to the motherboard and guess what.... i cant plug the 24pin ATX cable because the tubes are in the way :(

    • @crax999
      @crax999 6 місяців тому

      what did you do to fix?

    • @splindizzle5413
      @splindizzle5413 6 місяців тому

      @@crax999 Ordered cablemod modflex cables. As a workaround, if you dont want to spend more money on custom cables, you can remove the braiding from the factory cable. On the end of it, there is a plastic/rubber and underneath there is a plastic cable tie, which makes the cable so stiff and unable to bend. Remove all that crap and bend it.

  • @WiscoGuy77
    @WiscoGuy77 Рік тому +1

    What diameter is that tubing?

  • @nickscheuring6287
    @nickscheuring6287 4 місяці тому

    Tube cutting and lengths are missing

  • @pillepolle3122
    @pillepolle3122 Рік тому

    Great build. But i cannot afford it.

  • @agustincid4866
    @agustincid4866 9 місяців тому

    Will you be able to cool the 13900K in this configuration?

  • @Michael-np3lj
    @Michael-np3lj 10 місяців тому

    Why don’t they make a white variant

  • @tma2532
    @tma2532 8 місяців тому

    Would this same build work with a vertical gpu mount if you use a slimmer bottom rad?

  • @lordsofgaming2930
    @lordsofgaming2930 7 місяців тому

    the most confusing thing for me right now is understanding which fittings to purchase. I am 100% lost on that part.

    • @EKWBofficial
      @EKWBofficial  7 місяців тому +2

      Once you decide between soft and hard tubing, simply pick the desired tubing size and fittings to match. If you could use some help with planning your loop don't hestitate and reach out to our customer support team (with as much info about your desired build as possible) and they'll happily look into it and get back to you with a list of compatible liquid-cooling parts needed for you to assemble your desired PC. You can contact our technical support team here: customerservice.ekwb.com/hc/en-us/requests/new

  • @DJaquithFL
    @DJaquithFL Рік тому +2

    11:16 See EK Leak Tester tutorial ua-cam.com/video/b_zsMjQhQLg/v-deo.html

    • @saneldomeh92
      @saneldomeh92 Рік тому

      Thank you for the link. 11:31-11-42 does include a red warning at the bottom of the video to do a leak test and your link is perfect.

    • @DJaquithFL
      @DJaquithFL Рік тому +1

      @@saneldomeh92 .. I saw the warning and it would have been nice to have included it in this video.

    • @saneldomeh92
      @saneldomeh92 Рік тому +1

      ​@@DJaquithFL Good idea, thank you for the input

    • @DJaquithFL
      @DJaquithFL Рік тому +1

      @@saneldomeh92 .. What would be exceptionally helpful is a tutorial on how to measure and adjust the size of rigid tubing. Personally I wasted several tubes before getting it right.

    • @saneldomeh92
      @saneldomeh92 Рік тому

      ​@@DJaquithFL I do see a lot of videos on youtube on how to do just that. Basically everyone will start with, cut it longer and slowly trim it. But if there is enough of feedback I could do a How to video on that topic and use one of the STL builds for that purpose.

  • @Le10White
    @Le10White 7 місяців тому

    The port routing is wrong. The rad ports need to be horizontal, and the last discharge should be above them all.

  • @digitalboroda6570
    @digitalboroda6570 10 місяців тому

    Phahahaha 2000 euro for the kit)))) nice ekwb

  • @soyolaya1647
    @soyolaya1647 Рік тому

    Don’t buy from them! I ordered my shop the loop two months ago and the other half of my shipment still hasn’t arrived! Customer service is very poor and they reply after many days with false promises! Very disappointing! Never again!